Reply to thread

Message

Found a section in the ceton device page on a tuner set to a channel .... looks like the device uses RTP for streaming.

So based onthat I assume "source server" is teh ceton device and local server is my mediaportal server.
[ATTACH=full]176822[/ATTACH][DOUBLEPOST=1457744513][/DOUBLEPOST]Tried the following with no luck (no signal message). the 101 adderss is the ceton device and the other my HTPC.
#EXTM3U
rtp://192.168.1.101
rtp://192.168.1.101:8000
rtp://@192.168.1.101:8000
rtp://192.168.1.101@192.168.223.129
rtp://192.168.1.101:8000@192.168.223.129[DOUBLEPOST=1457744913][/DOUBLEPOST]Also tried UDP with no luck

udp://192.168.1.101
udp://192.168.1.101:8000
udp://@192.168.1.101:8000
udp://192.168.1.101@192.168.223.129
udp://192.168.1.101:8000@192.168.223.129

I have no doubt it will work once I figure out the right protocol and syntax/format for the ceton infinitv eth 6 device.

<blockquote data-quote="WiseguyMN" data-source="post: 1178162" data-attributes="member: 157813">Found a section in the ceton device page on a tuner set to a channel .... looks like the device uses RTP for streaming.So based onthat I assume &quot;source server&quot; is teh ceton device and local server is my mediaportal server.[ATTACH=full]176822[/ATTACH][DOUBLEPOST=1457744513][/DOUBLEPOST]Tried the following with no luck (no signal message). the 101 adderss is the ceton device and the other my HTPC.#EXTM3Urtp://192.168.1.101rtp://192.168.1.101:8000rtp://@192.168.1.101:8000rtp://192.168.1.101@192.168.223.129rtp://192.168.1.101:8000@192.168.223.129[DOUBLEPOST=1457744913][/DOUBLEPOST]Also tried UDP with no luckudp://192.168.1.101udp://192.168.1.101:8000udp://@192.168.1.101:8000udp://192.168.1.101@192.168.223.129udp://192.168.1.101:8000@192.168.223.129I have no doubt it will work once I figure out the right protocol and syntax/format for the ceton infinitv eth 6 device.</blockquote>

[QUOTE="WiseguyMN, post: 1178162, member: 157813"] Found a section in the ceton device page on a tuner set to a channel .... looks like the device uses RTP for streaming. So based onthat I assume "source server" is teh ceton device and local server is my mediaportal server. [ATTACH=full]176822[/ATTACH][DOUBLEPOST=1457744513][/DOUBLEPOST]Tried the following with no luck (no signal message). the 101 adderss is the ceton device and the other my HTPC. #EXTM3U rtp://192.168.1.101 rtp://192.168.1.101:8000 rtp://@192.168.1.101:8000 rtp://192.168.1.101@192.168.223.129 rtp://192.168.1.101:8000@192.168.223.129[DOUBLEPOST=1457744913][/DOUBLEPOST]Also tried UDP with no luck udp://192.168.1.101 udp://192.168.1.101:8000 udp://@192.168.1.101:8000 udp://192.168.1.101@192.168.223.129 udp://192.168.1.101:8000@192.168.223.129 I have no doubt it will work once I figure out the right protocol and syntax/format for the ceton infinitv eth 6 device. [/QUOTE]