Failed To Start Tv Unable To Create Graph Message With A Hauppauge Video Card (1 Viewer)

[wausman]

MediaPortal Version: 0.2.0.1
MediaPortal Skin: bluetwo 0.2.1.0
Windows Version: server 2003 standard edition sp 1
CPU Type: intel(R) p4 2.0 GHz
HDD: maxtor 30 gig
Memory: 512 ram
Motherboard: intel(r) 845
Motherboard Chipset: dell dim 4400
Motherboard Bios: intel A05
Video Card: nvidia geforce2 mx with tv out
Video Card Driver: 5.13.01.1520
Sound Card: creative sb live basic(wdm)
Sound Card AC3:
Sound Card Driver: 5.10.00.0000
1. TV Card: hauppauge 878
1. TV Card Type: analog
1. TV Card Driver: 3.49.24025.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider: direct tv
HTPC Case:
Cooling: fan
Power Supply: dell
Remote: none
TV: hauppauge
TV - HTPC Connection: component

SORRY I DON'T HAVE A COMPLETE HARDWARE LIST I'M PRETTY NEW AND I DIDN'T KNOW WHAT A CODEC OR THE HTPC WAS.ANYHOW I INSTALLED MEDIA PORTAL A FEW DAYS AGO AND I GOT THE UNABLE TO CREATE GRAPH MESSAGE I READ THE ONLINE DOCUMENTATION I WENT THROUGH THE Software Encoder TV-Card Setup
AND I USED GRAPH EDIT DIDN'T REALLY KNOW WHAT I WAS DOING BUT I DID GET AUDIO BUT I COULDN'T GET VIDEO COULD SOMEONE PLEASE HELP?

 

[Taipan]

Please don't double-post - I have removed your other posting on this same topic.

Also, please do not write in all CAPITALS, as it gives the impression that you are shouting and it is harder to read ...

I don't think that your video card is adequate - please scheck the minimum requirements. This is probably why you don't get any video - MediaPortal requires a DirectX 9 capable video card.

 

[wausman]

Sorry about the double post that was a accident and i didn't know about the caps.

My video card works fine with wintv also when i used graph edit i didn't get the video lines connected all the way from tv tuner to crossbar then to the capture devise and that was as far as i could get it.

Can i post my CaptureCardDefinitions just my section is 25 lines i didn't know if that was to much?

 

[wausman]

I checked my video card does support Directx9

 

[Taipan]

when i used graph edit i didn't get the video lines connected all the way from tv tuner to crossbar then to the capture devise and that was as far as i could get it.

Could you post a screen shot of this as an attachment so we can have a look at it?

Can i post my CaptureCardDefinitions just my section is 25 lines i didn't know if that was to much?

Yes, that's fine ...

 

[wausman]

i sent a file as a .doc hope that will work



<capturecard commercialname="Hauppauge WinTV 878 based" capturename="Hauppauge WinTV Capture" devid="ven_109e&amp;dev_036e&amp;subsys_13eb0070&amp;rev_02">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/
<filters>
<filter cat="tvtuner" name="Hauppauge WinTV TvTuner" checkdevice="true"/>
<filter cat="tvaudio" name="Hauppauge WinTV TvAudio" checkdevice="true"/>
<filter cat="crossbar" name="Hauppauge WinTV Crossbar" checkdevice="true"/>
<filter cat="capture" name="Hauppauge WinTV Capture" checkdevice="true"/>
<filter cat="videncoder" name="InterVideo Video Encoder" checkdevice="false"/>
<filter cat="audencoder" name="%audioencoder%" checkdevice="false"/>
<filter cat="mux" name="%mpegmux%" checkdevice="false"/>
<filter cat="vrm" name="video renderer" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="1"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="5"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="3" sinkfilter="audencoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"/>
<connection sourcefilter="mux" sourcepin="0" sinkfilter="vrm" sinkpin="0"/>

 

[wausman]

here is the file

 

[wausman]

i didn't realize it wasn't all on that first shot so here is the other half of the screen.