- June 9, 2006
- 154
- 2
- Home Country
-
Denmark
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3Wide
Windows Version: XP SP2
CPU Type: Athlon 64 X2 5600+ (2,8 GHz)
HDD: 750GB seagate (boot) & 2x 1TB seagate in RAID0 configuration
Memory: 3 GB Kingston HyperX DDRII PC2-6400 (3-3-3-10)
Motherboard: ASRock ALiveNF5-eSATA2+
Motherboard Chipset: NVIDIA nForce 520
Motherboard Bios: AMI
Video Card: Club 3D HD 2600XT 512 MB GDDR3 SDRAM
Video Card Driver: Catalyst 7.10
Sound Card: Integrated in MB / Realtek ALC888
1. TV Card: Terratec 2400i
1. TV Card Type: DVB-T - PCI-E x1
1. TV Card Driver: BDA Driver 1.0.3.266
Video-Audio Codec: ffdshow-rev1589_20071031_clsid_sse_icl10.exe + MPV/MPA
HTPC Case: mCubed HFX Classic
Cooling: Heatsinks on cabinet - hooked to CPU/GFX/HDD enclosures via heatpipes; plus Nexus Real Silent, 120mm, 22,8dB(A),B/W controlled by mCubed T-Balancer® bigNG
Power Supply: NesteQ Nova 500W 0dB External PSU
Remote: Firefly
TV: Sony KDL32-D3000
TV - HTPC Connection: VGA
Just upgraded my MP from 0.2.3 Final to 1.0 RC4 - and i like it... Except problems...
The remote works... sort of... Some buttons work, others do not... When entering config and changing the settings for the buttons on the remote, the changes stays in some instances, in others they do not... Also when i make changes, and check the "inputdevicemappings" directory, no "custom" directory is created, as it were in 0.2.3 (and as it says in the warning.txt file there should be)...
The remote worked flawlessly under 0.2.3... Am i missing something?? Do i need new drivers/additional software to make it work under 1.0 ???
Thx guys...
MediaPortal Skin: Blue3Wide
Windows Version: XP SP2
CPU Type: Athlon 64 X2 5600+ (2,8 GHz)
HDD: 750GB seagate (boot) & 2x 1TB seagate in RAID0 configuration
Memory: 3 GB Kingston HyperX DDRII PC2-6400 (3-3-3-10)
Motherboard: ASRock ALiveNF5-eSATA2+
Motherboard Chipset: NVIDIA nForce 520
Motherboard Bios: AMI
Video Card: Club 3D HD 2600XT 512 MB GDDR3 SDRAM
Video Card Driver: Catalyst 7.10
Sound Card: Integrated in MB / Realtek ALC888
1. TV Card: Terratec 2400i
1. TV Card Type: DVB-T - PCI-E x1
1. TV Card Driver: BDA Driver 1.0.3.266
Video-Audio Codec: ffdshow-rev1589_20071031_clsid_sse_icl10.exe + MPV/MPA
HTPC Case: mCubed HFX Classic
Cooling: Heatsinks on cabinet - hooked to CPU/GFX/HDD enclosures via heatpipes; plus Nexus Real Silent, 120mm, 22,8dB(A),B/W controlled by mCubed T-Balancer® bigNG
Power Supply: NesteQ Nova 500W 0dB External PSU
Remote: Firefly
TV: Sony KDL32-D3000
TV - HTPC Connection: VGA
Just upgraded my MP from 0.2.3 Final to 1.0 RC4 - and i like it... Except problems...
The remote works... sort of... Some buttons work, others do not... When entering config and changing the settings for the buttons on the remote, the changes stays in some instances, in others they do not... Also when i make changes, and check the "inputdevicemappings" directory, no "custom" directory is created, as it were in 0.2.3 (and as it says in the warning.txt file there should be)...
The remote worked flawlessly under 0.2.3... Am i missing something?? Do i need new drivers/additional software to make it work under 1.0 ???
Thx guys...