Graphics card upgrade (1 Viewer)

[henrynicholson]

Me again...

I installed directx 9.0C and tried media portal. It loaded up the new setup wizard where the system hung. This did at least give me a new log which is:

22/01/2006 21:43:06 Create new wizard setup
22/01/2006 21:43:08 FindInstancedevicenp:\\?\pci#ven_14f1&dev_8802&subsys_90020070&rev_05#4&24b99e98&0&42f0
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Enum\pci\ven_14f1&dev_8802&subsys_90020070&rev_05\4&24b99e98&0&42f0
22/01/2006 21:43:08 serviceName:HCW88TSE
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Services\HCW88TSE\Enum
22/01/2006 21:43:08 Number of cards:1
22/01/2006 21:43:08 card#0=PCI#VEN_14F1&DEV_8802&SUBSYS_90020070&REV_05#4&24b99e98&0&42F0
22/01/2006 21:43:08 using card:#0
22/01/2006 21:43:08 FindUniqueFilter:card#0 filterdevicenp:\\?\stream#hcw88bda.m90xx#5&d2cd573&0&0
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Enum\stream\hcw88bda.m90xx\5&d2cd573&0&0
22/01/2006 21:43:08 serviceName:HCW88BDA
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Services\HCW88BDA\Enum
22/01/2006 21:43:08 filters available:1
22/01/2006 21:43:08 filter#:0=Stream#HCW88BDA.M90xx#5&d2cd573&0&0
22/01/2006 21:43:08 using filter #:0=Stream#HCW88BDA.M90xx#5&d2cd573&0&0
22/01/2006 21:43:08 FindUniqueFilter:card#0 filterdevicenp:\\?\pci#ven_14f1&dev_8802&subsys_90020070&rev_05#4&24b99e98&0&42f0
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Enum\pci\ven_14f1&dev_8802&subsys_90020070&rev_05\4&24b99e98&0&42f0
22/01/2006 21:43:08 serviceName:HCW88TSE
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Services\HCW88TSE\Enum
22/01/2006 21:43:08 filters available:1
22/01/2006 21:43:08 filter#:0=PCI#VEN_14F1&DEV_8802&SUBSYS_90020070&REV_05#4&24b99e98&0&42F0
22/01/2006 21:43:08 using filter #:0=PCI#VEN_14F1&DEV_8802&SUBSYS_90020070&REV_05#4&24b99e98&0&42F0
22/01/2006 21:43:08 FindInstancedevicenp:\\?\pci#ven_14f1&dev_8802&subsys_90020070&rev_05#4&24b99e98&0&42f0
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Enum\pci\ven_14f1&dev_8802&subsys_90020070&rev_05\4&24b99e98&0&42f0
22/01/2006 21:43:08 serviceName:HCW88TSE
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Services\HCW88TSE\Enum
22/01/2006 21:43:08 Number of cards:1
22/01/2006 21:43:08 card#0=PCI#VEN_14F1&DEV_8802&SUBSYS_90020070&REV_05#4&24b99e98&0&42F0
22/01/2006 21:43:08 using card:#0
22/01/2006 21:43:08 FindUniqueFilter:card#0 filterdevicenp:\\?\stream#hcw88bda.m90xx#5&d2cd573&0&0
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Enum\stream\hcw88bda.m90xx\5&d2cd573&0&0
22/01/2006 21:43:08 serviceName:HCW88BDA
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Services\HCW88BDA\Enum
22/01/2006 21:43:08 filters available:1
22/01/2006 21:43:08 filter#:0=Stream#HCW88BDA.M90xx#5&d2cd573&0&0
22/01/2006 21:43:08 using filter #:0=Stream#HCW88BDA.M90xx#5&d2cd573&0&0
22/01/2006 21:43:08 FindUniqueFilter:card#0 filterdevicenp:\\?\pci#ven_14f1&dev_8802&subsys_90020070&rev_05#4&24b99e98&0&42f0
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Enum\pci\ven_14f1&dev_8802&subsys_90020070&rev_05\4&24b99e98&0&42f0
22/01/2006 21:43:08 serviceName:HCW88TSE
22/01/2006 21:43:08 keyYSTEM\CurrentControlSet\Services\HCW88TSE\Enum
22/01/2006 21:43:08 filters available:1
22/01/2006 21:43:08 filter#:0=PCI#VEN_14F1&DEV_8802&SUBSYS_90020070&REV_05#4&24b99e98&0&42F0
22/01/2006 21:43:08 using filter #:0=PCI#VEN_14F1&DEV_8802&SUBSYS_90020070&REV_05#4&24b99e98&0&42F0
22/01/2006 21:43:08 found 1 tv cards
22/01/2006 21:43:08 Digital DVB-T Card:Hauppauge Nova-T
22/01/2006 21:43:11 start application
22/01/2006 21:43:11 HCW: Could not find registry entries for driver components! (Not installed?)
22/01/2006 21:43:11 HCW: Could not find registry entries for driver components! (Not installed?)


Any ideas on this??
Thanks in advance for any help

 

[mPod]

22/01/2006 21:43:11 HCW: Could not find registry entries for driver components! (Not installed?)
22/01/2006 21:43:11 HCW: Could not find registry entries for driver components! (Not installed?)

You have enabled the Hauppauge remote control but don't have the IR driver part installed properly. I think the log says it all. :wink:

 

[henrynicholson]

And do you think that is what causes it to freeze? It never did when I had the previous card and also, I haven't got far enough into the setup to enable the remote, where would i go about disabling it.

Also, I've found the computer completely crashes when I run direct 3d test and direct draw test in dx diag.

Sorry if I keep asking stupid questions

 

[jawbroken]

It does sound like perhaps the remote is not the problem (or at least not the only problem) as the DirectX tests are also failing. I have no idea what could be causing this as you have reinstalled windows, changed drivers, etc. I would get support from your video card manufacturer about the DirectX issues, if you can.

 

[henrynicholson]

Do you think there could be something physically wrong with the graphics card or is that fairly unlikely?

I only bought the damn thing because I need the tv-out as my flatmate keeps complaining about the monitor which now accompanies the tv in the front room. Slightly random question...

Is there such a thing as a tv-out card which only does that and would run along side an agp graphics card?

 

[Callifo]

Not thats supported by MP no. Only the card doing the tv out can use the DX acceleration.