GRAPHS not rebuilt after retrun from Hibernation (1 Viewer)

[SciDoctor]

I'll try dissabling forced shutdown.

Be a while for some feedback though due to EPG schedules times.

'Entering shutdown Hibernate ; forced: True -- kick off shutdown thread'... you think this is the problem and the shutdown thread isn't actioned which is causing the route problem .

 

[gibman]

well I fear that the force=true option is causing tve3 not to cleanup proplerly after itself before hitting hibernation.
So when u resume it is perhaps in a messy state.
Maybe even more logging stuff will appear now, and the hibernation fase mite take a few more seconds.

Seen this with MP when forcing standby there.

/Gibman

 

[SciDoctor]

26/09/2007 14:56:13 9 PowerScheduler: Entering shutdown Hibernate ; forced: False -- kick off shutdown thread
26/09/2007 14:56:13 5 PowerScheduler: Shutdown thread is running: Hibernate, force: False
26/09/2007 14:56:13 5 PowerScheduler: Informing handlers about UserShutdownNow
26/09/2007 14:56:14 5 PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
26/09/2007 14:56:15 5 PowerScheduler.NextWakeupTime: inspecting handlercheduledRecordingsHandler time:26/09/2007 15:09:00
26/09/2007 14:56:15 5 PowerScheduler: new next wakeup time 26/09/2007 15:09:00 found by ScheduledRecordingsHandler
26/09/2007 14:56:15 5 PowerScheduler: Shutdown is allowed True ; forced: False
26/09/2007 14:56:15 5 PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
26/09/2007 14:56:15 5 PowerScheduler.NextWakeupTime: inspecting handlercheduledRecordingsHandler time:26/09/2007 15:09:00
26/09/2007 14:56:16 5 PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31/12/9999 23:59:59
26/09/2007 14:56:17 5 PowerScheduler.NextWakeupTime: inspecting handlercheduledRecordingsHandler time:26/09/2007 15:09:00
26/09/2007 14:56:17 5 PowerScheduler: Set wakeup timer to wakeup system in 7.71328125 minutes
26/09/2007 14:56:17 5 PowerScheduler: Entering shutdown Hibernate ; forced: False
26/09/2007 14:56:17 F WindowsController: Performing ExitWindows Hibernate, force: False
26/09/2007 14:56:17 7 26/09/2007 14:56:17 7 OnPowerEvent: PowerStatus: QuerySuspend
26/09/2007 14:56:17 7 PowerScheduler: System wants to enter standby (query)
26/09/2007 14:56:17 7 26/09/2007 14:56:17 7 OnPowerEvent: PowerStatus: Suspend
26/09/2007 14:56:17 7 PowerScheduler: System is going to standby
26/09/2007 14:56:17 7 Controller: epg stop
26/09/2007 14:56:17 7 PowerScheduler: Stopping TVController
26/09/2007 14:56:17 7 Controller: DeInit.
26/09/2007 14:56:17 7 Controller: HeartBeat monitor stopped...
26/09/2007 14:56:17 7 PowerScheduler: Removed default set of standby/resume handlers to PowerScheduler
26/09/2007 14:56:17 7 Powerscheduler: stopped
26/09/2007 14:56:17 7 Controller: stop streamer...
26/09/2007 14:56:17 7 RTSP: stop streamer
26/09/2007 14:56:17 7 Controller: streamer stopped...
26/09/2007 14:56:17 7 Controller: stop scheduler...
26/09/2007 14:56:17 7 Scheduler: stopped
26/09/2007 14:56:17 7 Controller: scheduler stopped...
26/09/2007 14:56:17 7 Controller: stop epg grabber...26/09/2007 14:56:17 7 Controller: dispose card:Nebula DigiTV PCI BDA Tuner Filter
26/09/2007 14:56:17 7 Controller: dispose card:Nebula DigiTV USB BDA Filter
26/09/2007 14:56:17 7 Controller: dispose card:Nebula DigiTV USB BDA Filter
26/09/2007 14:56:17 7 Controller: dispose card:Nebula DigiTV USB BDA Filter
26/09/2007 14:56:17 7 PowerScheduler: new next wakeup time 31/12/9999 23:59:59 found by
26/09/2007 15:05:21 E PowerScheduler: OnResume
26/09/2007 15:05:31 7 26/09/2007 15:05:31 7 OnPowerEvent: PowerStatus: ResumeAutomatic
26/09/2007 15:05:31 7 PowerScheduler: System has resumed automatically from standby
26/09/2007 15:05:31 7 PowerScheduler: reinitializing the tvservice TVController
26/09/2007 15:05:31 7 Controller: DeInit.
26/09/2007 15:05:31 7 Controller: dispose card:Nebula DigiTV PCI BDA Tuner Filter
26/09/2007 15:05:31 7 Controller: dispose card:Nebula DigiTV USB BDA Filter
26/09/2007 15:05:31 7 Controller: dispose card:Nebula DigiTV USB BDA Filter
26/09/2007 15:05:31 7 Controller: dispose card:Nebula DigiTV USB BDA Filter

This is now appearing in the logs, looks like the 'dispose' routine was being missed previously.

Will allow this test tor un through a couple of hibernate/schedule cycles and then if OK re-enable the EPG and test.

 

[gibman]

Yeah like I'd have guessed it seems more de-init stuff is being done - probably for the better good.

Lets see what happens - I have my hopes high

If this does the trick, then perhaps there should be a warning attached to that "force" feature.

/Gibman

 

[SciDoctor]

Semi fixing the original problem but now a new problem in that the PS shutdown routine deletes the details for the USB tuners and at return from Hibernation they are reasigned as NEW tuners which aren't associated with any channels.

From the logs you can see that Tuners 2,3,5 have been deleted and 6,7,8 introduced .

 

[philpem]

I'm getting basically the same thing, but with Forced Shutdown disabled...

 

[Anna21]

Was there ever a solution to this problem? I have the same issues. Turning off forced shutdown didn't help.

I'm using SVN Revision:16362

2007-10-26 17:53:47.656250 [20]: Exception :TvLibrary.TvException: Unable to start graph
at TvLibrary.Implementations.DVB.TvCardDvbBase.RunGraph(Int32 subChannel)
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
2007-10-26 17:53:47.656250 [20]: Exception :Unable to start graph
2007-10-26 17:53:47.656250 [20]: site :Void RunGraph(Int32)
2007-10-26 17:53:47.656250 [20]: source :TVLibrary
2007-10-26 17:53:47.656250 [20]: stacktrace: at TvLibrary.Implementations.DVB.TvCardDvbBase.RunGraph(Int32 subChannel)
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
2007-10-26 17:53:47.656250 [20]: Exception :TvLibrary.TvException: Unable to start graph
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
at TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)
2007-10-26 17:53:47.656250 [20]: Exception :Unable to start graph
2007-10-26 17:53:47.656250 [20]: site :Void RunGraph(Int32)
2007-10-26 17:53:47.656250 [20]: source :TVLibrary
2007-10-26 17:53:47.656250 [20]: stacktrace: at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
at TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)



Thanks...xx

 

[petzlux]

Same issues here, on first boot it works fine, after a hibernate/standby, I cant watch TV anymore, dont know about scheduled recordings. I never enabled forced shutdown, hibernating/standby using the standard windows mecanism (through start menu and/or MCE remote) Below is my error log. This basically makes MP unusable as a TV tuner replacement for me!!

Using MP 0.2.3 and latest TV Server SVN



2007-11-19 17:15:34.953125 [17]: Exception :TvLibrary.TvException: Unable to start graph
at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
at TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)
2007-11-19 17:15:34.953125 [17]: Exception :Unable to start graph
2007-11-19 17:15:34.953125 [17]: site :Void RunGraph(Int32)
2007-11-19 17:15:34.953125 [17]: source :TVLibrary
2007-11-19 17:15:34.953125 [17]: stacktrace: at TvLibrary.Implementations.DVB.TvCardDVBT.Tune(Int32 subChannelId, IChannel channel)
at TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)

 

[rpain]

Also unable to start graph on resume

Same problem for me - Hauppauge NOVA T 500 on resume from standby (and hibernation) coming up with unable to start graph. I'm using 2.3 final standalone (no tv server). If I close MP and restart it's fine - I presume there's no way to close MP just before the standby kicks in and then reload it when the computer comes back out of standby?



Any ideas guys?

Richard