Reply to thread

Message

<blockquote data-quote="kiwijunglist" data-source="post: 1015538" data-attributes="member: 76888">You have an unusual setup, there are so many points where something could go wrong. eg. Display driver, Laptop doesn't support 5.1, Display adapter -&gt; HDMI adapter breaks 5.1, TV is not setup correctly, etc...&nbsp;The problem probably lies outside of MediaPortal, do you have 5.1 in other applications?&nbsp;I can however suggest you try the following special diagnostic configuration (only for you) first.&nbsp;[spoiler]MP Config: Audio Codec = LAVDon't mix stereo = OffMixing = OnSpeakers = 5.1 (Even if you have 7.1 etc, choose 5.1 here)Convert layout to standard channels = OnBit-streaming: all off&nbsp;MP Config: Audio Renderer = MPARSpeakers = 5.1Sample Rate = 48000Force up/down mix = YesEvent driven mode = YesExclusive mode = YESAC3 Encoding mode = FORCEDAudio Device = HDMI[/spoiler]&nbsp;Now play 5.1 movie. Check info on TV+Amp via info button on remotes it should show 5.1, if not go into TV sound settings and adjust the optical. If above doesn't work then repeat with AC3 Encoding = Disabled/Off.&nbsp;If above does not work then update display drives (This also updates sound driver). If still fails then contact Toshiba.&nbsp;Also this:[ATTACH]133720[/ATTACH]</blockquote>

[QUOTE="kiwijunglist, post: 1015538, member: 76888"] You have an unusual setup, there are so many points where something could go wrong. eg. Display driver, Laptop doesn't support 5.1, Display adapter -> HDMI adapter breaks 5.1, TV is not setup correctly, etc... [B]The problem probably lies outside of MediaPortal, do you have 5.1 in other applications?[/B] I can however suggest you try the following special diagnostic configuration (only for you) first. [spoiler]MP Config: Audio Codec = LAV Don't mix stereo = Off Mixing = On Speakers = 5.1 (Even if you have 7.1 etc, choose 5.1 here) Convert layout to standard channels = On Bit-streaming: all off MP Config: Audio Renderer = MPAR Speakers = 5.1 Sample Rate = 48000 Force up/down mix = Yes Event driven mode = Yes Exclusive mode = [B]YES[/B] AC3 Encoding mode = [B]FORCED[/B] Audio Device = HDMI[/spoiler] Now play 5.1 movie. Check info on TV+Amp via info button on remotes it should show 5.1, if not go into TV sound settings and adjust the optical. If above doesn't work then repeat with AC3 Encoding = Disabled/Off. If above does not work then update display drives (This also updates sound driver). If still fails then contact Toshiba. Also this: [ATTACH]133720[/ATTACH] [/QUOTE]

Verification