Reply to thread

Message

<blockquote data-quote="moab" data-source="post: 647982" data-attributes="member: 73157">Do not set it up as a hybrid card. Hybrid is only for cards that have 2 ports and 1 shared tuner. The older 1600 cards probably were hybrid. The newer 1600 cards are not hybrid tuner they are the dual tuner which is much better.Hence the new 1600s should show up like separate cards. No need to config hybrid.If you only have 2 coax connectors then you should have the newer one. I think the older 1600s have 3 coax connectors.When you install media portal it should show 3 tuners for the 1600 instead of just the 1 IP tuner you have. -IP tuner-BDA tuner-Analog tuner.You do not need to configure anything with the cards - just go straight to do a scan on the BDA (digital) and the Analog.Ignore the IP tuner.Go to the scan on the BDA (digital) tuner and you will see the QAM type drop down.Then do your analogue.If you are not sure about your Windows Driver then download the latest from Hauppig <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" /> <a href="http://www.hauppauge.com/site/support/support_hvr1600.html" target="_blank">Support for WinTV-HVR-1600</a>Click the driver which is the second download button at the bottom of the page.&nbsp; With your hardware MP should work with the default install, as it does with mine.You might want to re-install MP to remove any configs you did.</blockquote>

[QUOTE="moab, post: 647982, member: 73157"] Do not set it up as a hybrid card. Hybrid is only for cards that have 2 ports and 1 shared tuner. The older 1600 cards probably were hybrid. The newer 1600 cards are not hybrid tuner they are the [U][B]dual[/B][/U] tuner which is much better. Hence the new 1600s should show up like separate cards. No need to config hybrid. If you only have 2 coax connectors then you should have the newer one. I think the older 1600s have 3 coax connectors. When you install media portal it should show 3 tuners for the 1600 instead of just the 1 IP tuner you have. -IP tuner -BDA tuner -Analog tuner. You do not need to configure anything with the cards - just go straight to do a scan on the BDA (digital) and the Analog. Ignore the IP tuner. Go to the scan on the BDA (digital) tuner and you will see the QAM type drop down. Then do your analogue. If you are not sure about your Windows Driver then download the latest from Hauppig :) [url=http://www.hauppauge.com/site/support/support_hvr1600.html]Support for WinTV-HVR-1600[/url] Click the driver which is the second download button at the bottom of the page. With your hardware MP should work with the default install, as it does with mine. You might want to re-install MP to remove any configs you did. [/QUOTE]

Verification