Reply to thread

Message

<blockquote data-quote="Technec" data-source="post: 137279" data-attributes="member: 48316">I was able to successfully use this card via the antenna input. When adding the code above, both tuners were recognized (ATSC and NTSC). However, I did experience a problem trying to get the s-video in to work. After scanning for available channels by going into MP setup -&gt; Capture Cards -&gt; selecting appropriate tuner card (NTSC) -&gt; Edit and clicking scan, MP setup found a signal on channel 3. Next I went to TV Channels -&gt; TV Cards and moved channel 3 from available TV channels to Assigned TV Channels. I opened MP and went to MyTV and I had picture and sound.Let me know if you have questions. I will do my best to help. I am hoping that MP gains better support for the HVR-1600 in the near future being that Hauppauge ran out of 150MCE cards and is placing the 1600 to compensate. I bought a PVR-150 but in the box was a notice saying they had a shortage of PVR-150 cards and they were putting the HVR-1600's in the box as a temporary replacement. The HVR-1600, from what it looks like, is gaining momentum as more people are inquiring about the installation procedure. I wouldn't be surprised if Hauppauge discontinued the PVR-150 anyway. I read that the HVR-1600 has a better picture. If you are using a settop box, their is another thread on the continuance of setting up the remaining channels.</blockquote>

[QUOTE="Technec, post: 137279, member: 48316"] I was able to successfully use this card via the antenna input. When adding the code above, both tuners were recognized (ATSC and NTSC). However, I did experience a problem trying to get the s-video in to work. After scanning for available channels by going into MP setup -> Capture Cards -> selecting appropriate tuner card (NTSC) -> Edit and clicking scan, MP setup found a signal on channel 3. Next I went to TV Channels -> TV Cards and moved channel 3 from available TV channels to Assigned TV Channels. I opened MP and went to MyTV and I had picture and sound. Let me know if you have questions. I will do my best to help. I am hoping that MP gains better support for the HVR-1600 in the near future being that Hauppauge ran out of 150MCE cards and is placing the 1600 to compensate. I bought a PVR-150 but in the box was a notice saying they had a shortage of PVR-150 cards and they were putting the HVR-1600's in the box as a temporary replacement. The HVR-1600, from what it looks like, is gaining momentum as more people are inquiring about the installation procedure. I wouldn't be surprised if Hauppauge discontinued the PVR-150 anyway. I read that the HVR-1600 has a better picture. If you are using a settop box, their is another thread on the continuance of setting up the remaining channels. [/QUOTE]

Verification