HD Audio Bitstreaming Help (1 Viewer)

[hoborg]

Did you tryed unlocked SAF6?

 

[Holzi]

AW: HD Audio Bitstreaming Help

It seems that there is no splitter at all in use.

If there was graph should look like this:
http://i7.photobucket.com/albums/y291/Pheare/salvation_graph_studio.jpg
or
http://img36.imageshack.us/img36/2617/graphedit.png
or
http://www.thehtpc.net/files/2011/04/13-graphedit_x64.jpg

I can recommend you to install the LAVF Package.

 

[mhandscomb1]

Nope.

How do i go about getting the unlocked version as i can see the link to the locked version in your sig.

 

[robbo100]

I use SAF6 and it works very well.

 

[mhandscomb1]

I've installed SAF6 (not the unloacked version as i don't have the link for that) and i'm still getting exactly the same problem.

But in graphstudio it now shows lav as the splitter.

 

[hoborg]

Maybe the problem is on reciever side? Did you try to update reciever firmware (if possible)?
Do you have HDMI connection, right?

 

[mhandscomb1]

It's a brand new amp that should support pretty much everything.

I've tested it with a blu ray player and it bitstream fine from there.

It's connected using a HDMI cable and as i've said if you click on the timeline in mpc-hc the amp says it's receiving dts hd/dolby true hd.

 

[robbo100]

If you check the Windows 7 audio configuration for your HDMI audio output, does it show TrueHD and DTS-HD as supported formats?

 

[jellybeard999]

Make sure you have the correct drivers
Uninstall all codecs and install the SAFcodecs
Configure FFDShow as above and set it as the codec in MP config

I had DTS-MA working in MPCHC via FFDShow but couldn't get it working in MP until I started from scratch with the SAF installer

 

[corcy]

Have you got ffdshow set as the audio codec and ticked the appropriate pass-through setting in the ffdshow options (e.g. True HD)?

As per this image:

(from MediaSmartServer.net)

Chose in the menu "connect to" direct sound istead of any filter. I had a similar problem once and this helped solve it.