United States of America
- Moderator
- #1
TV-Server Version: 1.0 rc 2
MediaPortal Version: 1.0 rc 2
MediaPortal Skin: Purevision
Windows Version: XP MCE roll-up 2 + updates (sp3)
CPU Type: AMD Athlon 64X2 6000+ 3.01 GHz
HDD: WD eIDE 120GB / (2)WDC WD1600JS 160GB/ WDC WD5000AAKS 500GB/ WDC WD10EACS 1TB
Memory: MWave 4GB DDR2 667=(2GB X 2)
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: on board
Video Card Driver: from install disk
Sound Card: on board Realtek HD & AC'97
Sound Card AC3: 1 Optical
Sound Card Driver: from install disk
1. TV Card: HD HomeRun
1. TV Card Type: ATSC (dual) ethernet
1. TV Card Driver: 20080718beta1
2. TV Card: WINTV-PVR-150 MCE
2. TV Card Type: analog TV/FM/S-Vid
2. TV Card Driver: from install disk
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV (current SVN)
MPEG2 Audio Codec: MPA/Bass (current SVN)
h.264 Video Codec:
Satelite/CableTV Provider: OTA ATSC
HTPC Case: Silverstone LC17B
Cooling: CPU fan, 2 x 80 mm case fans
Power Supply: Thermaltake TR2-420W
Remote: Harmony 670 as MCE (US) using IR Server Suite
TV: Hitachi 32" analog crt TV
TV - HTPC Connection: VGA to S-video 4:3 (Grandtec PC to Video EZ)
I mentioned this in the SVN forum.
I installed mediaportal-svn-10-02-2008--19-45-Rev20372, and started MP. MyTV no longer could get any ATSC channels from my HD Homerun. TV Server config sees my tuner(s), but does not find a signal when scanning, so... no channels are found. I have the newest drivers/firmware for the HD Homerun.
I had to revert back to the previous SVN (mediaportal-svn-09-20-2008--10-52-Rev20268) and it worked again.
This was a total surprise to me, especially since this SVN is supposed to be the last before RC3 is released.
Thanks for any help.
Chuck
I could try the install again if the TV Server logs would be of any help.
MediaPortal Version: 1.0 rc 2
MediaPortal Skin: Purevision
Windows Version: XP MCE roll-up 2 + updates (sp3)
CPU Type: AMD Athlon 64X2 6000+ 3.01 GHz
HDD: WD eIDE 120GB / (2)WDC WD1600JS 160GB/ WDC WD5000AAKS 500GB/ WDC WD10EACS 1TB
Memory: MWave 4GB DDR2 667=(2GB X 2)
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: on board
Video Card Driver: from install disk
Sound Card: on board Realtek HD & AC'97
Sound Card AC3: 1 Optical
Sound Card Driver: from install disk
1. TV Card: HD HomeRun
1. TV Card Type: ATSC (dual) ethernet
1. TV Card Driver: 20080718beta1
2. TV Card: WINTV-PVR-150 MCE
2. TV Card Type: analog TV/FM/S-Vid
2. TV Card Driver: from install disk
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV (current SVN)
MPEG2 Audio Codec: MPA/Bass (current SVN)
h.264 Video Codec:
Satelite/CableTV Provider: OTA ATSC
HTPC Case: Silverstone LC17B
Cooling: CPU fan, 2 x 80 mm case fans
Power Supply: Thermaltake TR2-420W
Remote: Harmony 670 as MCE (US) using IR Server Suite
TV: Hitachi 32" analog crt TV
TV - HTPC Connection: VGA to S-video 4:3 (Grandtec PC to Video EZ)
I mentioned this in the SVN forum.
I installed mediaportal-svn-10-02-2008--19-45-Rev20372, and started MP. MyTV no longer could get any ATSC channels from my HD Homerun. TV Server config sees my tuner(s), but does not find a signal when scanning, so... no channels are found. I have the newest drivers/firmware for the HD Homerun.
I had to revert back to the previous SVN (mediaportal-svn-09-20-2008--10-52-Rev20268) and it worked again.
This was a total surprise to me, especially since this SVN is supposed to be the last before RC3 is released.
Thanks for any help.
Chuck
I could try the install again if the TV Server logs would be of any help.