Help Disecq setup (1 Viewer)

[mm1352000]

Hi giovifree

Yes - the TV Server logs.
1. Open TV Server configuration.
2. Click "open log directory" in the top left hand corner.
3. Zip up the files you find there.
4. Post the zip file here.

mm

 

[giovifree]

ok here are my logs from tonight, I think the interesting part in tv.log is from here "2011-10-21 00:10:23.284083 [(13)]: Stopcard" until the end.

my actions were:
1) I selected hotbird
2) I selected the transponder 10992 from the dropdown menu
3) tuner report no lock
4) again i try with trasponder 11766
5) tuner report always no lock


the system works perfectly, I tuned and I see all the channels of the Italian bouquet TivuSat on 13E hotbird and TIMB transponders on Atlantic Bird 1 on 12.5W

my tuner is Cinergy S2 PCI HD CI + tivusat cam

 

[w8andc]

Since MP 1.2.1 I've got the same problem very often here. Tuner "not locked" after disecq 1.2 (motor) command.
Also tonight the problem was there. In MP the message "no signal" was showing up.

I use 2 tuners which are both capable for Disecq 1.2:

* Technotrend S2-3200
* FloppyDTV-S2

In TV-configuration screen I tried to solve the problem.
Till now, no luck.

Tried each tuner separately for Disecq.
The dish moves to the correct position , but can't tune and after some seconds dish moves back to original position.