Reply to thread

Message

<blockquote data-quote="opden1" data-source="post: 879961" data-attributes="member: 115712">i used to have the same problem and your idea is correct.still i would suggest 2 way to over come this issue first option to set up the router to put a static IP address to the TVserver and in the TV server setup menu rather than putting it on auto choose the static IP and things should work (i am using this option from my side)second option is to set the static IP in the TV server as what you did before but best is to assign an IP address outside the DHCP range (usally DHCP range starts from 100 till 150 or 200) for example your router IP is 192.168.1.1 or 192.168.0.1 (depending on your router IP address)with is subnet mask of 255.255.255.0 the DHCP range is 192.168.1.100 till 192.168.1.150 (for 50 users)&nbsp;hence the static range you can select for your IP address is 192.168.1.2 till 192.168.1.99 with the same subnet mask then on each device you define the IP address of the TV server &nbsp;one thing i should point out if you use a static IP address from the DHCP range it might give a IP conflict with other devices in the future, hence best is to use the range outside the DHCP range.&nbsp;hope these information would help</blockquote>

[QUOTE="opden1, post: 879961, member: 115712"] i used to have the same problem and your idea is correct. still i would suggest 2 way to over come this issue first option to set up the router to put a static IP address to the TVserver and in the TV server setup menu rather than putting it on auto choose the static IP and things should work (i am using this option from my side) second option is to set the static IP in the TV server as what you did before but best is to assign an IP address outside the DHCP range (usally DHCP range starts from 100 till 150 or 200) for example your router IP is 192.168.1.1 or 192.168.0.1 (depending on your router IP address) with is subnet mask of 255.255.255.0 the DHCP range is 192.168.1.100 till 192.168.1.150 (for 50 users) hence the static range you can select for your IP address is 192.168.1.2 till 192.168.1.99 with the same subnet mask then on each device you define the IP address of the TV server one thing i should point out if you use a static IP address from the DHCP range it might give a IP conflict with other devices in the future, hence best is to use the range outside the DHCP range. hope these information would help [/QUOTE]

Verification