- June 9, 2006
- 154
- 2
- Home Country
- Denmark
MediaPortal Version: 0.2.3 RC1
MediaPortal Skin: Blue Two Wide
Windows Version: XP SP2
CPU Type: Athlon 64 3500+
HDD: 400GB seagate+700GB seagate
Memory: 2 GB
Motherboard: ASUS A8V-VM SE
Motherboard Chipset: VIA K8M890
Motherboard Bios: AMI
Video Card: integrated in MB / S3
Video Card Driver:
Sound Card: Integrated in MB / Realtek ALC660
Sound Card AC3:
Sound Card Driver:
1. TV Card: Terratec 2400i
1. TV Card Type: DVB-T - PCI-E x1
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case: mCubed
Cooling: FAnless (heatsinks on cabinet - hooked to CPU via heatpipes)
Power Supply: 700 W ZeroDB
Remote: Firefly
TV: Sony KDL32-D3000
TV - HTPC Connection: VGA
Did a total re-install... on 0.2.2 i used c.all + lcd smartie to drive the display...
Trying the same now - and lcd smartie communicates well with the VFD...
My problem is getting c.all to talk to lcd smartie... Dont remember what syntax i used in old system i lcd smarte - could any of you guy plz point me in the right direction / tell me the syntax you're using???
I'm looking for the lines thats typed into the setup screen of LCD smartie...
The c.all manual doesn't help much...
MediaPortal Skin: Blue Two Wide
Windows Version: XP SP2
CPU Type: Athlon 64 3500+
HDD: 400GB seagate+700GB seagate
Memory: 2 GB
Motherboard: ASUS A8V-VM SE
Motherboard Chipset: VIA K8M890
Motherboard Bios: AMI
Video Card: integrated in MB / S3
Video Card Driver:
Sound Card: Integrated in MB / Realtek ALC660
Sound Card AC3:
Sound Card Driver:
1. TV Card: Terratec 2400i
1. TV Card Type: DVB-T - PCI-E x1
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case: mCubed
Cooling: FAnless (heatsinks on cabinet - hooked to CPU via heatpipes)
Power Supply: 700 W ZeroDB
Remote: Firefly
TV: Sony KDL32-D3000
TV - HTPC Connection: VGA
Did a total re-install... on 0.2.2 i used c.all + lcd smartie to drive the display...
Trying the same now - and lcd smartie communicates well with the VFD...
My problem is getting c.all to talk to lcd smartie... Dont remember what syntax i used in old system i lcd smarte - could any of you guy plz point me in the right direction / tell me the syntax you're using???
I'm looking for the lines thats typed into the setup screen of LCD smartie...
The c.all manual doesn't help much...