Reply to thread

Message

TV-Server Version:
MediaPortal Version: Media Portal 1
MediaPortal Skin: Default
Windows Version: Vista Ultimate SP1
CPU Type: AMD X2 5200
HDD: WD IDE 160GB
Memory: 4GB DD2
Motherboard: MSI Diva Live 5.1
Video Card: Built in (780G)
Video Card Driver:
Sound Card: D2Audio (part of AMD Maui Platform)
Sound Card AC3:
Sound Card Driver:
1. TV Card: Leadtek Winfast PxPVR2000
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: ffdshow
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: ffdshow
Satelite/CableTV Provider: Big DTH
HTPC Case: Antec Fusion Veris 430
Cooling:
Power Supply: Antec 430W
Remote: MCE Remote
TV: Philips CRT
TV - HTPC Connection: Component

Hi,

I am using the latest beta of IRSS(1.4.2). With the other stable build(1.0.4.1) I never really got the IR blasting to work within MP 1.0.

After I made TV3 Blaster Plugin for IR Server learn all the codes of my STB remote, I am able to change channels using the MCE remote from within MP. Then after a few hours, some of the IR codes for the numeric buttons (1-9) of the STB do not work while some do. If I go to TV Server Configuration | TV3 Blaster Plugin for IR Server and test the learnt numeric IR values only some of them blast the correct code (sometimes no code at all) to the STB. This does not happen with all the numeric codes but about half of them.

If I re-learn the numeric button IR codes for the STB, everything works OK but only for sometime. Any idea why?

Another important thing to note: When I start MP the MCE remote does not work. I have to do an Alt+TAB and close MP Watchdog. Then I can use the up and down arrows to select My TV. After the enter my TV and select "TV On" and go into fullscreen TV I cannot go back to the previous menu by pressing the back button of the MCE remote (The keyboard equivalent of Esc). At this time if I start IR Server Config and click OK without making any changes all my direction keys and back key works fine.

Again, this works only for a couple of hours or so until the problem of losing IR codes happen.

What all logs should I enable and where are they written?

This is really killing me. What is the solution to my problems?

Thanks,
Srikanth

<blockquote data-quote="skoka123" data-source="post: 361978" data-attributes="member: 86957">TV-Server Version: MediaPortal Version: Media Portal 1MediaPortal Skin: DefaultWindows Version: Vista Ultimate SP1CPU Type: AMD X2 5200HDD: WD IDE 160GBMemory: 4GB DD2Motherboard: MSI Diva Live 5.1Video Card: Built in (780G)Video Card Driver: Sound Card: D2Audio (part of AMD Maui Platform)Sound Card AC3: Sound Card Driver: 1. TV Card: Leadtek Winfast PxPVR20001. TV Card Type: Analog1. TV Card Driver: 2. TV Card: 2. TV Card Type: 2. TV Card Driver: 3. TV Card: 3. TV Card Type: 3. TV Card Driver: 4. TV Card: 4. TV Card Type: 4. TV Card Driver: MPEG2 Video Codec: ffdshowMPEG2 Audio Codec: ffdshowh.264 Video Codec: ffdshowSatelite/CableTV Provider: Big DTHHTPC Case: Antec Fusion Veris 430Cooling: Power Supply: Antec 430WRemote: MCE RemoteTV: Philips CRTTV - HTPC Connection: ComponentHi,I am using the latest beta of IRSS(1.4.2). With the other stable build(1.0.4.1)&nbsp; I never really got the IR blasting to work within MP 1.0.After I made TV3 Blaster Plugin for IR Server learn all the codes of my STB remote, I am able to change channels using the MCE remote from within MP. Then after a few hours, some of the IR codes for the numeric buttons (1-9) of the STB do not work while some do. If I go to TV Server Configuration | TV3 Blaster Plugin for IR Server and test the learnt numeric IR values only some of them blast the correct code (sometimes no code at all) to the STB. This does not happen with all the numeric codes but about half of them.If I re-learn the numeric button IR codes for the STB, everything works OK but only for sometime. Any idea why?Another important thing to note: When I start MP the MCE remote does not work. I have to do an Alt+TAB and close MP Watchdog. Then I can use the up and down arrows to select My TV. After the enter my TV and select &quot;TV On&quot; and go into fullscreen TV I cannot go back to the previous menu by pressing the back button of the MCE remote (The keyboard equivalent of Esc). At this time if I start IR Server Config and click OK without making any changes all my direction keys and back key works fine.Again, this works only for a couple of hours or so until the problem of losing IR codes happen.What all logs should I enable and where are they written?This is really killing me. What is the solution to my problems?Thanks,Srikanth</blockquote>

[QUOTE="skoka123, post: 361978, member: 86957"] [b]TV-Server Version[/b]: [b]MediaPortal Version[/b]: Media Portal 1 [b]MediaPortal Skin[/b]: Default [b]Windows Version[/b]: Vista Ultimate SP1 [b]CPU Type[/b]: AMD X2 5200 [b]HDD[/b]: WD IDE 160GB [b]Memory[/b]: 4GB DD2 [b]Motherboard[/b]: MSI Diva Live 5.1 [b]Video Card[/b]: Built in (780G) [b]Video Card Driver[/b]: [b]Sound Card[/b]: D2Audio (part of AMD Maui Platform) [b]Sound Card AC3[/b]: [b]Sound Card Driver[/b]: [b]1. TV Card[/b]: Leadtek Winfast PxPVR2000 [b]1. TV Card Type[/b]: Analog [b]1. TV Card Driver[/b]: [b]2. TV Card[/b]: [b]2. TV Card Type[/b]: [b]2. TV Card Driver[/b]: [b]3. TV Card[/b]: [b]3. TV Card Type[/b]: [b]3. TV Card Driver[/b]: [b]4. TV Card[/b]: [b]4. TV Card Type[/b]: [b]4. TV Card Driver[/b]: [b]MPEG2 Video Codec[/b]: ffdshow [b]MPEG2 Audio Codec[/b]: ffdshow [b]h.264 Video Codec[/b]: ffdshow [b]Satelite/CableTV Provider[/b]: Big DTH [b]HTPC Case[/b]: Antec Fusion Veris 430 [b]Cooling[/b]: [b]Power Supply[/b]: Antec 430W [b]Remote[/b]: MCE Remote [b]TV[/b]: Philips CRT [b]TV - HTPC Connection[/b]: Component Hi, I am using the latest beta of IRSS(1.4.2). With the other stable build(1.0.4.1) I never really got the IR blasting to work within MP 1.0. After I made TV3 Blaster Plugin for IR Server learn all the codes of my STB remote, I am able to change channels using the MCE remote from within MP. Then after a few hours, some of the IR codes for the numeric buttons (1-9) of the STB do not work while some do. If I go to TV Server Configuration | TV3 Blaster Plugin for IR Server and test the learnt numeric IR values only some of them blast the correct code (sometimes no code at all) to the STB. This does not happen with all the numeric codes but about half of them. If I re-learn the numeric button IR codes for the STB, everything works OK but only for sometime. Any idea why? [B] Another important thing to note:[/B] When I start MP the MCE remote does not work. I have to do an Alt+TAB and close MP Watchdog. Then I can use the up and down arrows to select My TV. After the enter my TV and select "TV On" and go into fullscreen TV I cannot go back to the previous menu by pressing the back button of the MCE remote (The keyboard equivalent of Esc). At this time if I start IR Server Config and click OK without making any changes all my direction keys and back key works fine. Again, this works only for a couple of hours or so until the problem of losing IR codes happen. What all logs should I enable and where are they written? This is really killing me. What is the solution to my problems? Thanks, Srikanth [/QUOTE]