Live TV and Standby (1 Viewer)

[josch.hh]

TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Default
Windows Version: Vista 32bit SP1
CPU Type: AMD Athlon BE-2300
HDD: Toshiba 2,5" 80GB
Memory: 2GB DDR2-800
Motherboard: Asus M3N-H Hdmi
Video Card: Onboard Geforce 8300
Video Card Driver:
Sound Card: Onboard Realtek ALC1200
Sound Card AC3: optical out
Sound Card Driver:
1. TV Card: Technotrendt S2-3200
1. TV Card Type: DVB-S
1. TV Card Driver: 5.0.0.12
MPEG2 Video Codec: PowerDVD 8
MPEG2 Audio Codec: PowerDVD 8
h.264 Video Codec: PowerDVD 8
Satelite/CableTV Provider: Astra 19.2°E
HTPC Case:
Cooling: Thermalright
Power Supply: NoName
Remote: MCE


Hello,

i already posted this question in the german support forum, but could not get a solution.
The only result was that i am not the only one with this problem.

Now the problem:

• I am watching TV with MP
• I press the power button on my remote - (PC enters standby mode)
• I press the same button again - (PC and MP wake up, i am in MP home screen)
• I enter the TV module and want to start TV watching and get an error message that says something like "could not start Timeshift - The graph could not be initialized"

I seems the TV is dead after wakeup from standby. I even have to restart the TV-Service to get TV back.
I had this problem with different Mainboards (all with onboard graphic) and different DVB-S cards. I don't thing that it is a problem with the TV card, because the TV-Service doesn't seem to have difficulties with standby (I can open the TV-Service config and start the channel preview after standby).

Any idea?

 

[Paranoid Delusion]

2 things

TVServer config\General set delay before MP detects card, mine needs 20 secs before drivers fully restarted.

MP config\general restart MP on resume from standby, also wait for TVserver to start enabled (General\Delayed Start).

 

[josch.hh]

That does not help.
I already try it. I also set the delay at startup to 20sec.

 

[Paranoid Delusion]

I seems the TV is dead after wakeup from standby. I even have to restart the TV-Service to get TV back.

because the TV-Service doesn't seem to have difficulties with standby (I can open the TV-Service config and start the channel preview after standby).

Which one is true, as makes a big difference to what is wrong and the above statements are contradictory.

Most errors that i see all go back to directx running MP in your logs supplied.

 

[josch.hh]

Ok, i will explain again.

I have 2 senarios:

1.) Enter standby and resume from standby only with the TV-Service running
-> no problem

2.) Enter standby and resume from standby with the TV-Service an the MP client running
-> the described problem -> i have to restart the client AND the TV-Service to get TV back.
My suggestion: The MP client killed the TV functionality from the TV-Service:
The proof: I close the MP client after the problem occured, i start the TV-Serivce config tool, i open the tv-channel preview and get then same error like in the MP client: can't initialized graph


I thing the following part of the log file contains the problem:

2008-05-01 14:11:49.231000 [Info.][MPMain]: Main: WM_POWERBROADCAST: 18
2008-05-01 14:11:49.241000 [Info.][MPMain]: Main: Windows has resumed from standby or hibernate mode to handle a requested event
2008-05-01 14:11:49.279000 [Info.][MPMain]: Main: OnResume - Trying to wake up the monitor / tv
2008-05-01 14:11:49.688000 [Info.][MPMain]: Main: OnResume - Switch to home screen
2008-05-01 14:11:50.464000 [Warn.][MPMain]: d3dapp: Resetting DX9 device
2008-05-01 14:11:50.494000 [Info.][MPMain]: Main: Resetting DX9 device
2008-05-01 14:11:50.509000 [Info.][MPMain]: fonts.Dispose()
2008-05-01 14:11:50.517000 [Info.][MPMain]: Load fonts from C:\Program Files\Team MediaPortal\MediaPortal\Skin\BlueTwo\fonts.xml
2008-05-01 14:11:50.534000 [Info.][MPMain]: fonts.InitializeDeviceObjects()
2008-05-01 14:11:51.349000 [Warn.][MPMain]: GraphicContext: NO screen calibration file found for resolution 1280x1024!
2008-05-01 14:11:51.360000 [Info.][MPMain]: GraphicContext: MP will render at 25 FPS, use animations = True
2008-05-01 14:11:51.604000 [Info.][MPMain]: fonts.SetDevice()
2008-05-01 14:11:51.642000 [Info.][MPMain]: Main: Resetting DX9 device done
2008-05-01 14:11:51.650000 [Info.][MPMain]: Main: OnResume - Starting recorder
2008-05-01 14:11:51.720000 [Info.][9]: Commandprocessor: Starting
2008-05-01 14:11:51.725000 [Info.][MPMain]: Recorder: start
2008-05-01 14:11:51.849000 [Info.][MPMain]: Main: OnResume - init InputDevices
2008-05-01 14:11:51.856000 [Info.][MPMain]: MAP: using default mappings for DirectInput
2008-05-01 14:11:52.093000 [Info.][MPMain]: Main: WM_POWERBROADCAST: 7
2008-05-01 14:11:52.096000 [Info.][MPMain]: Main: Windows has resumed from hibernate mode
2008-05-01 14:11:52.099000 [Info.][MPMain]: Main: OnResume - already running -> return without further action
2008-05-01 14:11:52.102000 [Info.][MPMain]: TVHome.WndProc(): Windows has resumed from hibernate mode
2008-05-01 14:11:52.114000 [Info.][MPMain]: MAP: using default mappings for Microsoft MCE
2008-05-01 14:11:52.118000 [Info.][MPMain]: MCE: MCE remote enabled
2008-05-01 14:11:52.122000 [Info.][MPMain]: Main: OnResume - Done
2008-05-01 14:11:54.748000 [Info.][MPMain]: Recorder: stop
2008-05-01 14:11:55.245000 [Info.][9]: Commandprocessor: Stopping all tuners
2008-05-01 14:11:55.248000 [Info.][9]: Commandprocessor: Stopped
2008-05-01 14:11:55.254000 [Info.][MPMain]: tv home init:ASTRA HD+
2008-05-01 14:11:55.256000 [Info.][MPMain]: TVHome.ViewChannelAndCheck(): View channel=ASTRA HD+
2008-05-01 14:12:08.952000 [Info.][MPMain]: tv home init:ASTRA HD+ done
2008-05-01 14:12:09.193000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:10.016000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:10.138000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:10.213000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:10.338000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:10.572000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:10.683000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:10.841000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:10.957000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:11.155000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:11.272000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:11.623000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:12.956000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:13.071000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:13.189000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:13.306000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:14.406000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:14.828000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:16.121000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:16.236000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:16.354000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:16.470000 [Info.][10]: Main: DX9 re-entrant
2008-05-01 14:12:16.586000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:16.703000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:16.820000 [Info.][MPMain]: Main: DX9 re-entrant
2008-05-01 14:12:19.485000 [Info.][MPMain]: TexturePacker: disposing texture:1999
2008-05-01 14:12:19.489000 [Info.][MPMain]: TexturePacker: disposing texture:1998
2008-05-01 14:12:19.494000 [Info.][MPMain]: TexturePacker: disposing texture:1995
2008-05-01 14:12:19.592000 [Info.][MPMain]: Main: Exiting

 

[Paranoid Delusion]

As per the setting in MP\general restart MP on resume setting, is this physically happening, you should see MP starting up on resume and waiting for tvserver to have started. if your missing this, try disabling this and close config and then re open and change setting back.

In mediaportal.xml you could check for this line

<entry name="restartonresume">yes</entry>

 

[josch.hh]

I have already enabled this, but has no effect, the problem exists.

Can you tell me what "2008-05-01 14:12:09.193000 [Info.][10]: Main: DX9 re-entrant" means?

 

[Paranoid Delusion]

Do you see MP restart!

That why the dx9 re-entrant means, it already running, so it looks like it has not stopped and then restarted, which may not have given DX9 chance to fully reset..

 

[OnkelChris]

same for me...

going to hibernate/standby with tv running in mp... windows wakes up, mediaportal is reinitializing, but u can't use TV... My (uncomfortable) solution:
MCE StandBy Tool -> 10s Standby delay
PVRScheduler runs Script before enter Standby -> stop tvservice and close mediaportal
wake up
PVRScheduler runs Script -> start tvservice and run mediaportal

that's the only config working for me... Unfortunately, PVRScheduler sometimes forgets to start MP so my Hauppauge remote isn't responding and I need to go to may mediacenter and restart it with the powerbutton...

 

[josch.hh]

OnkelChris

Can you please post the logs files for this process. I am interesed if they look similar to mine.