Reply to thread

Message

<blockquote data-quote="Barry King" data-source="post: 1172134" data-attributes="member: 156572">Here are the logs for the following procedure:1.&nbsp; started MediaPortal Watchdog and pressed Proceed2. after startup I pressed Guide on my remote. {ie. No LiveTV active yet}3. pressed a channel on the Guide which started LiveTV4. Took a few seconds for LiveTV to establish and by that time the new channel displayed5. Pressed stop on the remote to stop LiveTV which presented back to the Guide6. Pressed a different channel on the Guide and LiveTV presented immediately7. Observed that the channel initially displayed was the old channel. Then observed MediaPortal&nbsp; &nbsp; switching the channel on my STB to the new channel with no freeze.This currently is my work around for using MP. I first have to stop the currently viewed channel which brings me back&nbsp; to the Guide and then search the Guide for a new channel to switch to. Any interaction to change the channel with LiveTV active and displaying causes the freeze. If I stop and start LiveTV I observe the action described in 7 above.Logs are attached,BK</blockquote>

[QUOTE="Barry King, post: 1172134, member: 156572"] Here are the logs for the following procedure: 1. started MediaPortal Watchdog and pressed Proceed 2. after startup I pressed Guide on my remote. {ie. No LiveTV active yet} 3. pressed a channel on the Guide which started LiveTV 4. Took a few seconds for LiveTV to establish and by that time the new channel displayed 5. Pressed stop on the remote to stop LiveTV which presented back to the Guide 6. Pressed a different channel on the Guide and LiveTV presented immediately 7. Observed that the channel initially displayed was the old channel. Then observed MediaPortal switching the channel on my STB to the new channel with no freeze. This currently is my work around for using MP. I first have to stop the currently viewed channel which brings me back to the Guide and then search the Guide for a new channel to switch to. Any interaction to change the channel with LiveTV active and displaying causes the freeze. If I stop and start LiveTV I observe the action described in 7 above. Logs are attached, BK [/QUOTE]

Verification