mce remote on irtrans (1 Viewer)

[Henry Mac]

MediaPortal Version: 0.2.1.0
Windows Version: xp sp2
CPU Type: AMD Athlon 64 3500 S939
HDD: Samsung SP2514N 250gb 7200 rpm 8mb (2x)
Memory: 1GB DDR 400 (2x 512MB)
Motherboard: Gigabyte GA-K8NF-9
Motherboard Chipset: Nforce 4 (4x) chipset
Motherboard Bios: Award Software International, Inc. F11, 1/13/2006
Video Card: VGA Radeon X1600 Pro PCI-e
Video Card Driver: ATI 8.282.0.0
Sound Card: M-audio Revolution 5.1
Sound Card AC3: s/pdif coax
Sound Card Driver:
1. TV Card: Technotrend c-1500
1. TV Card Type: DVB-C
1. TV Card Driver: BDA-Drivers 4.4.10.17
2. TV Card: FloppyDTV
2. TV Card Type: DVB-C
2. TV Card Driver: 4.2
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: mpa
MPEG2 Audio Codec: mpv
Satelite/CableTV Provider: caiway
HTPC Case: OrigenAE X15e Black
Cooling: Zalman Cooler 7700-CU
Power Supply: Silentmaxx Fanless 400 Watt / 460 W Peak PSU
Remote: Microsoft WinXP MCE Remote
TV: Jvc Av-32x37s CRT
TV - HTPC Connection: s-video

Hi All,

I seem to have some unintended doubleclicks with my mce remote on irtrans.
All works well but sometimes the mp reacts as if it gets double commands.
I did remove the app.cfg file.
Is this something I can change somewhere (like delaytime for repeat or something)?

Cheers,
Henry

 

[GaryW]

Same here

Have the same issue, did you find a solution?

 

[Henry Mac]

Have the same issue, did you find a solution?

No, actually I have no idea where to start looking.

 

[hwahrmann]

i would suggest looking into the MediaPortal Wiki.

This is documented very well there

 

[Henry Mac]

i would suggest looking into the MediaPortal Wiki.

This is documented very well there

Yes, of course I checked the wiki. And all is working well. But sometimes for example when I push <ok> it gets executed twice. It looks that it responds as if I pushed the button too long and does it twice. This is not related to the apps.cfg as I removed that. I cannot find anything on setting the repeat delay.

 

[hwahrmann]

well i've never had this problem.
you might have a look at your .rem file.
there is a section called [Timing].
Have a look at the Irtrans documenation and play with the [RP] parameter.
maybe this helps.

 

[Henry Mac]

well i've never had this problem.
you might have a look at your .rem file.
there is a section called [Timing].
Have a look at the Irtrans documenation and play with the [RP] parameter.
maybe this helps.

You rule! Thanks so much. For now I set it to 24ms and it is already a lot better. Some further testing needed to get the perfect value but I will get there.