Reply to thread

Message

<blockquote data-quote="ITSPecialist" data-source="post: 1225968" data-attributes="member: 161719">Hi all... I'm new to mediaportal and need a little help.After my old ARGUS TV solution is not supported any more I decided to switch to media portal. I will mainly use it to record some shows and bring Live TV to some of my mobile devices (notebooks). I decided to install MePo 2, and started with a single seat installation (for testing, as the server machine is located in my cellar), later on I tried to install the MePo 2 client on one of my notebooks.When using server (Win 7 Pro 64 bit, 6GB RAM, Intel Core2 Quad CPU Q9550 @ 2.83GHz) and client on the same machine, all is working well - but then I installed a MePo 2 client on one of my notebooks and had to find out that the (MePo 2 )server is not available to other clients in the network. All other features (fileshare, syslog.. ) are working well an can be reached from any system in the network. I'm pretty sure it has to do with the fact that the netowrk card (integrated, Intel(R) 82566DM-2 Gigabit Network Connection) is not recognized properly by MePo. I did another installation inside a virtual machine and there I was able to select the right IP in the streming server settings.In the &quot;MediaPortal 2 TV Configuration&quot; I only have the option to use &quot;auto&quot; or &quot;127.0.0.1&quot; as the IP address used by the server for RTSP streaming. The server is assigned a reserved IP adress via DHCP. Please let me know what kind of logs I could / should provide to give you guys the chance to help me.All the best from GermanyMichael</blockquote>

[QUOTE="ITSPecialist, post: 1225968, member: 161719"] Hi all... I'm new to mediaportal and need a little help. After my old ARGUS TV solution is not supported any more I decided to switch to media portal. I will mainly use it to record some shows and bring Live TV to some of my mobile devices (notebooks). I decided to install MePo 2, and started with a single seat installation (for testing, as the server machine is located in my cellar), later on I tried to install the MePo 2 client on one of my notebooks. When using server (Win 7 Pro 64 bit, 6GB RAM, Intel Core2 Quad CPU Q9550 @ 2.83GHz) and client on the same machine, all is working well - but then I installed a MePo 2 client on one of my notebooks and had to find out that the (MePo 2 )server is not available to other clients in the network. All other features (fileshare, syslog.. ) are working well an can be reached from any system in the network. I'm pretty sure it has to do with the fact that the netowrk card (integrated, Intel(R) 82566DM-2 Gigabit Network Connection) is not recognized properly by MePo. I did another installation inside a virtual machine and there I was able to select the right IP in the streming server settings. In the "MediaPortal 2 TV Configuration" I only have the option to use "auto" or "127.0.0.1" as the IP address used by the server for RTSP streaming. The server is assigned a reserved IP adress via DHCP. Please let me know what kind of logs I could / should provide to give you guys the chance to help me. All the best from Germany Michael [/QUOTE]

Verification