Missing Channels In EPG (1 Viewer)

[yogiman_uk]

Hi Everyone

I figured out how to map the correct channels to the webEPG thanks to a nice document on the MP-Site

However I have noticed that there are lots of channels that are not available, for example Five US and Five Life also many of the + channels are not available like ITV 3+1 for example.

Is there another source for data for these channels?

Also for some strange reason even though I have ITV 1 mapped it doesn't download any channel data. Does anyone have any idea?

Thanks

yogiman!

 

[Sh4nn0w]

What version of MP are you using? the missing ones got added a while ago in SVN at least.

Edit:

Are you listing the sites in the WebEPG conf by channels or website? As I've notcied there's no channelid for five us, ITV2/3 etc, but it is listed under website.

 

[yogiman_uk]

Hi

I am using 0.2.0.4

I can not use 0.2.1.0 or the current SVN's as they don't appear to work correctly with my HVR-1300, channel tuning problems

Thanks

Yogiman!

 

[Sh4nn0w]

I did have an hvr1300, it wasn't the card I found out, it was the frequencies in dvbt.xml that was causing problems with latest releases. (I'm assuming your problems with DVB-T not analog)

Was using my HVR1300 fine until a couple of weeks ago after adjusting the dvbt.xml file to correct frequencies for my transmitter, with 0.2.1 and SVN. See my thread [thread=13550]here[/thread]

Was stumped prior to working this out and was too stuck on 0.2.0.4.

Below is my current webepg, by website

 

[yogiman_uk]

Actually no not DVB-T can not get that here yet and not analogue either.

I have my SKY Digibox fed into CVBS#1 and an MCE remote / blaster that selects and changes the channels, I use WEBEPG and map the channels to the correct channel number and presto! working with all but the few I mentioned that I can not find.

Thanks my friend, when I figure out exactly what your saying I will look into it. I really apprecaite the reply

Thanks


yogiman!

 

[Paranoid Delusion]

yogiman_uk

I can not use 0.2.1.0 or the current SVN's as they don't appear to work correctly with my HVR-1300, channel tuning problems

Possibly hauppauge driver update, I am using the TVengine 3, which until recently caused me problems, but since the EPG side was fixed for DVB-T, now getting smooth picture and EPG over air data, what a result, just might be a option, only if it does not cheese of the Wife or Girlfriend.

Regards

Just read new posts, hmm see your problem from a different viewpoint. sorry cannot help with sky boxes.

 

[yogiman_uk]

I did have an hvr1300, it wasn't the card I found out, it was the frequencies in dvbt.xml that was causing problems with latest releases. (I'm assuming your problems with DVB-T not analog)

Was using my HVR1300 fine until a couple of weeks ago after adjusting the dvbt.xml file to correct frequencies for my transmitter, with 0.2.1 and SVN. See my thread [thread=13550]here[/thread]

Was stumped prior to working this out and was too stuck on 0.2.0.4.

Below is my current webepg, by website

Hi Paranoid

Sorry I don't think I am making myself very clear.

I don't use the DVB-T or analogue tuners for anything I only use the CVBS#1 input to take a signal from my SKY Digibox then I have programmed each channel manually into MP so that it changes the channels on the SKYBOX when I changed them in the MP TV Guide. Thus it pretty cool.

Sorry am I missing something or am I just thick? (ok don't answer that)

Yogiman!

 

[Sh4nn0w]

Actually no not DVB-T can not get that here yet and not analogue either.

I have my SKY Digibox fed into CVBS#1 and an MCE remote / blaster that selects and changes the channels, I use WEBEPG and map the channels to the correct channel number and presto! working with all but the few I mentioned that I can not find.

Thanks my friend, when I figure out exactly what your saying I will look into it. I really apprecaite the reply

Thanks


yogiman!

Whoops jumped ahead of myself then.

Don't post after the pub I think.

If all you want is the channel update for the missing ones, then I guess you might just to be able to update the WebEPG channel / website listing.

I've found the [thread=12769]thread[/thread] when the missing channels got added, only about a month ago.

You could try backing up (in case it goes horribly wrong ) your
C:\Program Files\Team MediaPortal\MediaPortal\WebEPG\Grabbers\GB\1-xmltv_radiotimes_com.xml

and try replacing with my updated one (had to zip it as I can attach an .xml file), then re-run WebEPG.conf and see if they are available as per my post above.

 

[yogiman_uk]

Thanks for that I will back up and give it a go, I will post a reply tomorrow!

Again thank your for your help

Yogiman!

 

[yogiman_uk]

Ok did as you asked and replaced the xml, and went back into the channel config and there was no difference in the channel listings?

Did I do something incorrectly?

Thanks


Yogiman!