Electronic Program Guide (8 Viewers)

everything about EPG (xmlTV, WebEPG, dvb-EPG)

WebEPG (14 Viewers)

everything related to WebEPG in here

TV Movie - Clickfinder

everything about the TV Movie - Clickfinder plugin

xmlTV (6 Viewers)

everything related to xmlTV in here
Hi I have successfully got the tvguide.xml to import but it hasn't taken all the channels as in the digiguide, is there a limit to how many channels it can do? Pete
Hi I have successfully got the tvguide.xml to import but it hasn't taken all the channels as in the digiguide, is there a limit to...
Hi I am still learning MP and trying to get it configured to my liking. Sorry for all the newbie questions. I don't fully...
Replies
17
Views
9K
WJW, Thank you for all your suggestions. I am making progress but it is not yet working for me. I see, in your batch file, that you rename the xml file to tvguide.xml which I believe is the file that the mp plugin is looking for. I do have the SED program in the same folder with all the xml stuff. In TV Server, when I click the...
WJW, Thank you for all your suggestions. I am making progress but it is not yet working for me. I see, in your batch file, that...
(Media Portal 1.17) I've been using mc2xml to get guide data from the "new" Microsoft servers. It generally works, but will go...
Replies
9
Views
5K
I've been reading and see you are (unknowingly using) syntax is sloppy. You only need ONE of the SET episodeNum!= lines above as it is a repeated command every time after the first. Moreover, there is no ;" (that's semicolon double-quote) following the end of the line to complete the phrase as you have properly included on the SET...
I've been reading and see you are (unknowingly using) syntax is sloppy. You only need ONE of the SET episodeNum!= lines above as...
Hi! The Episodescanner is a little command line utility that scans your schedules and then adds episodenumber and seriesnumber to...
Replies
373
Views
87K
Thanks, it's back working tonight :) I hadn't ticked "EPG grabbing whilst idle", so hoping that's all it was.
Thanks, it's back working tonight :) I hadn't ticked "EPG grabbing whilst idle", so hoping that's all it was.
Hi everyone I'm still wondering if anyone has success getting the OTA EPG data for FreeSAT ? I've tried all combinations with the...
Replies
78
Views
4K
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no longer works, see this for how to fix it Freesat EPG in UK anyone?
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no...
Hi, Despite Channel 4 HD withdrawing from Freesat - the broadcast still seems to work but there is very limited EPG (now/next...
Replies
28
Views
6K
Hi I think the last time I set up TV server I had the same issue and I had to add Freesat Info manually. These were the parameters I used: Transponder 115 Frequency 11.42500 GHz / 11425 MHz Polarity Horizontal Mod DVB-S, QPSK Symbol 27500 FEC 2/3 Network ID 59 Transport ID 2315 Freesat Info...
Hi I think the last time I set up TV server I had the same issue and I had to add Freesat Info manually. These were the parameters...
Hi Everyone, hope you are all well I am setting up MediaPortal1 in Hastings where there is DVB-T only I had absolutely no success...
Replies
10
Views
1K
Hi Percy, are you using Freesat and getting the EPG? I'm trying to get my MP1 EPG on Freesat but cannot obtain the Freesat.Info channel so wondering if you had success. Regards TW
Hi Percy, are you using Freesat and getting the EPG? I'm trying to get my MP1 EPG on Freesat but cannot obtain the Freesat.Info...
To give full details I am transferring from WMC to MP1. I am currently using DVBlink to merge freeview and fressat channels and am...
Replies
3
Views
1K
Thanks CyberSimian, I was afraid my memory was faulty regarding that. On the plus side I played around with powershell last night and got a semi-working solution going.
Thanks CyberSimian, I was afraid my memory was faulty regarding that. On the plus side I played around with powershell last night...
I'm using XMLTV with Schedules Direct for my epg data. I am almost positive that in the past, Movie descriptions also included the...
Replies
2
Views
303
I think I will now beg to differ! The functionality you describe (and presumably admired) within WMC is almost exactly that which I tried to describe for TVWishlist, i.e. partial matching and keyword searching.(amongst other things). May I suggest that you read the documentation page for TVWishlist found here. Again, I make the...
I think I will now beg to differ! The functionality you describe (and presumably admired) within WMC is almost exactly that which...
I was having so many problems with MP1 that i elected to reinstall windows 10. I was able to get the tv epgs fine before but with...
Replies
10
Views
718
hm, didn't got any replies in almost a year. I guess its the wrong area after all... perhaps @mm1352000 has any insights as a tv-service guru? It's running on MYSQL 5.6 with all the settings that came with it when installing the tvservice way back.
hm, didn't got any replies in almost a year. I guess its the wrong area after all... perhaps @mm1352000 has any insights as a...
Hi, Not sure if this is better put in the WEBEPG section (because that's the plugin that is acting up) but over here it might get...
Replies
1
Views
1K
That's what I told him here, I just installed MP 1.23. Which version of Schedules Direct should I use, where do I obtain it from something is clearly screwed up in his system.
That's what I told him here, I just installed MP 1.23. Which version of Schedules Direct should I use, where do I obtain it from...
I have been reading for days and it seems the more I read the more confused I become. I have been using MP for years without TV...
Replies
14
Views
6K
I have tested TvGuide via EPG Buddy and Schedules direct XMLTV. I successfully download a large listing of channels. For example: <?xml version="1.0" encoding="ISO-8859-1"?> <!DOCTYPE tv SYSTEM "xmltv.dtd"> <tv source-info-name="Schedules Direct" generator-info-name="mc2xml" generator-info-url="mailto:mc2xml@gmail.com"> <channel...
I have tested TvGuide via EPG Buddy and Schedules direct XMLTV. I successfully download a large listing of channels. For example...
I have tested TvGuide via EPG Buddy and Schedules direct XMLTV. I successfully download a large listing of channels. For example...
Replies
0
Views
698
You need to pick up the ones on different card types manually
You need to pick up the ones on different card types manually
Hello everyone, On my MediaPortal setup in the UK I have the Black Gold TV card and I use DVB-S (unless the channel is on DVB-T...
Replies
1
Views
1K
Thanks for that, yes that part seems to be working but it only goes a week ahead. Digiguide goes 14 days ahead, & gives a lot more info
Thanks for that, yes that part seems to be working but it only goes a week ahead. Digiguide goes 14 days ahead, & gives a lot more info
Hello, I'm sure I'm being dumb. I I use the XMLTV GUI, I use digiguide as my schedule provider. But its stopped working, had been...
Replies
3
Views
927
Thanks very much for the detailed reply Jasmeet_181 - I will try your suggestions
Thanks very much for the detailed reply Jasmeet_181 - I will try your suggestions
Hi - I'm getting my EPG in MP 1.21.0 using EPGCollector to collect New Zealand Freeview MHEG5 data and combine it with IPTV data...
Replies
3
Views
2K
Thanks Owlsroost, I will have a look into the code at some stage, might be a while though! :) Cheers, Divxmaster
Thanks Owlsroost, I will have a look into the code at some stage, might be a while though! :) Cheers, Divxmaster
Hi, I've been using Mediaportal for a very very long time, but have never come across a way to enable soft record padding. By this...
Replies
31
Views
3K
Hi Owlsroost Thanks for that. I'll make that change. Tony
Hi Owlsroost Thanks for that. I'll make that change. Tony
Since yesterday, 2nd February 2019, and today, UK - BBC2 EPG has several programs with 'No information'. I guess this is a UK issue...
Replies
57
Views
4K
Based on the log entry, it's a SchedulesDirect plugin issue. Sorry, no idea. The source code for the plugin is here - geoffstewart/mp-schedulesdirect - so you could try searching the code for 'is not a valid value for LineupTypes' to get more info on the source of the problem. You might also want to search the forum for ideas (and...
Based on the log entry, it's a SchedulesDirect plugin issue. Sorry, no idea. The source code for the plugin is here -...
I am using SchedulesDirect for importing HDHomeRun Premium and OTA EPGs. After restarting the MediaPortal1 service, no EPG data...
Replies
1
Views
1K
Installed it and got it to recognize my channels but having issues getting MP2 to recognize the channels mapped. I wasn't able to work with it too long last night. I'll try again this evening.
Installed it and got it to recognize my channels but having issues getting MP2 to recognize the channels mapped. I wasn't able to...
I've looked all through here and have not seen a thread directly addressing my problem so forgive me if it has been dealt with...
Replies
12
Views
4K
Ok, It seems that EPG-Buddy is the best solution. Season and Episode show as 1.1, 1.2, etc or the air date. The movies now show the air date so I'll consider this as solved. Thanks.
Ok, It seems that EPG-Buddy is the best solution. Season and Episode show as 1.1, 1.2, etc or the air date. The movies now show the...
Hi, I'm using zap2xml and zap2it as my source. The tvguide.xml file contains all of the episode info, date aired, movie date...
Replies
5
Views
2K
Did you get squared away and ditch DirecTV?
Did you get squared away and ditch DirecTV?
I ran MC2XML.EXE last night and everything went OK. The problem happened when I went to find the xmltv.xml file to rename it to...
Replies
1
Views
3K
I live in San Antonio. WOAI-DT broadcast NBC on 4.1. WOAI has other frequencies 4.2 Antenna, and 4.3 Charge. I'm using a combination of HDHomeRun tuner and Hauppauge tuners. I can see 4.1 when I watch live TV via the HDHomeRun app. I'm using MP1 to record and WOAI-DT Schedules Direct is reporting as either 4.2, 4.3 or some other...
I live in San Antonio. WOAI-DT broadcast NBC on 4.1. WOAI has other frequencies 4.2 Antenna, and 4.3 Charge. I'm using a...
I live in San Antonio. WOAI-DT broadcast NBC on 4.1. WOAI has other frequencies 4.2 Antenna, and 4.3 Charge. I'm using a...
Replies
0
Views
2K
Or I could just keep using zap2xml -- which works well when that data sources (tvguide.com or zap2it.com) are working right (which isn't always)
Or I could just keep using zap2xml -- which works well when that data sources (tvguide.com or zap2it.com) are working right (which...
Easy to setup, and almost everything works. One problem (so far), a suggestion, and a question. Trying to use EPG-Buddy in a new...
Replies
8
Views
2K
Nevermind, I got it. to move the channels you need to right click and then select the group you want to add to. If you drag and drop, despite there being a + sign suggesting it is the way, it doesnt work. I also didn't need to open and close Media Portal dan
Nevermind, I got it. to move the channels you need to right click and then select the group you want to add to. If you drag and...
Hi, Im trying to get Zap2xml working on Media Portal 1 on Windows 10. Im located in California and want to watch ATSC. Ive been...
Replies
32
Views
8K
Hi MM. How did you find this issue? Is there some tool that returns something more verbose than what is going in the standard log. Like how do I find what key this is complaining about so I can fix the file? [2018-02-11 17:06:13,924] [Log ] [XmlTvImporter] [ERROR] - XML tv import error loading C:\ProgramData\Team...
Hi MM. How did you find this issue? Is there some tool that returns something more verbose than what is going in the standard log...
Hi. I am downloading an xml file via mc2xml from schedules direct json service. When Load/Refresh I get action message 'Error'...
Replies
5
Views
2K
The best solution to this is EPG-Buddy and TV Guide I have been using it for over a year and have helped others in switching over EPG-Buddy
The best solution to this is EPG-Buddy and TV Guide I have been using it for over a year and have helped others in switching over...
The number of days argument doesn't seem to work for me using zap2xml to get tvguide.com data. (don't know how many days I'm...
Replies
14
Views
3K
I want to emphasize that I only said it was a possibility. These are the trade-offs of using a custom version.
I want to emphasize that I only said it was a possibility. These are the trade-offs of using a custom version.
So now the Sky UK EPG grabber won't work due to changes made by Sky, I figured I'd try to use the Freesat EPG instead, which is...
Replies
3
Views
2K
Thanks Milhouse. I didn't realize the channels should be named identically to schedules Direct . I renamed some channels and confirmed its working. I have installed MySql workbench, but I haven't figured out how to use it to map the channels if the names don't match. Also, I'm not sure if its pulling extra data from The TVDB, I'll...
Thanks Milhouse. I didn't realize the channels should be named identically to schedules Direct . I renamed some channels and...
I've been rebuilding my HTPC system, and I'm experimenting with different EPG Grabbers for OTA TV in the USA. I have been using...
Replies
5
Views
4K
John, We actually have fairly similar systems, except you have a much more current MP version, and are getting TV via antenna. If you decide to return to MP, I would show you how I get tvguide data, if you're interested. Hauppauge tells me that they do not contract with TitanTV, so I don't think you'll ever successfully get data from...
John, We actually have fairly similar systems, except you have a much more current MP version, and are getting TV via antenna. If...
Can anyone help me learn how to access TitanTV with an EPG grabber? Like other USA based MP users I’ve lost Imdb (WebEPG) access...
Replies
16
Views
7K
I just saw this discussed in another thread, but can't find it now -- sorry. Could someone please point me to the code for the Export button on the xmltv mapping screen? Can't be much more than -- open file; while(extract works) {write extract to text file}; Close file; --- can it? Maybe I can recall enough to make a separate...
I just saw this discussed in another thread, but can't find it now -- sorry. Could someone please point me to the code for the...
I just saw this discussed in another thread, but can't find it now -- sorry. Could someone please point me to the code for the...
Replies
0
Views
947
Top Bottom