Reply to thread

Message

<blockquote data-quote="John0502" data-source="post: 1013322" data-attributes="member: 112949">MM&nbsp;There are a number of TV and MP log files there - are there a subset that would be sufficient for analysis?&nbsp;I can confirm that under MP 1.3 the TVsettings are default - no TV or MP delay on start settings, no TV re-initialize after resume in Powerscheduler.&nbsp;&nbsp;<a href="https://forum.team-mediaportal.com/members/kiwijunglist.76888/" target="_blank">kiwijunglist</a>Not situation 1). It is point 2).When I place the HTPC in stanby-sleep it is when I am watching live TV. When I resume, MP 1.4 goes to the TV screen, but TV is neither turned on nor on full screen, So, I need to turn on TV and then go to full screen after resume. Normally when I do this with MP 1.3, it either resumes to Live TV or to the EPG.&nbsp;I have 2 dual tuner TV cards, a Leadtek Winfast dtv2000ds and a DVICO FusionHDTV Dual Tuner DVB-T. I must say that the DVICO card is more susceptible to signal fluctuations than the Leadtek.&nbsp;I also use the latest StreamedMP skin and MPExtended - pretty much the only skin and plug-ins I use (World Clock and HTPCInfo make up the rest).&nbsp;I have clonezilla images of my MP 1.3 and MP 1.4 setups so I can go back and forwards to check setups etc without much trouble. I did upgrade to MP 1.4 from MP 1.3. My PC is a 3rd gen i3-3220 CPU with Windows 7 SP 1 and all patches. I have 4GB RAM. My TV recordings and TimeShift Buffer are on a different drive to the system drive where MP runs from.&nbsp;One note, I previously, MP 1.2.3 got full system freeze with a rough audio. Need to do a complete system hard reset to fix. This has happened once or twice with MP 1.3 - don't think it has happened with MP 1.4 - Tuner settings and re-tuning seems to fix this - again, signal strength contributed to this issue I think.</blockquote>

[QUOTE="John0502, post: 1013322, member: 112949"] MM There are a number of TV and MP log files there - are there a subset that would be sufficient for analysis? I can confirm that under MP 1.3 the TVsettings are default - no TV or MP delay on start settings, no TV re-initialize after resume in Powerscheduler. [SIZE=4][B][URL='https://forum.team-mediaportal.com/members/kiwijunglist.76888/']kiwijunglist[/URL][/B][/SIZE] Not situation 1). It is point 2). When I place the HTPC in stanby-sleep it is when I am watching live TV. When I resume, MP 1.4 goes to the TV screen, but TV is neither turned on nor on full screen, So, I need to turn on TV and then go to full screen after resume. Normally when I do this with MP 1.3, it either resumes to Live TV or to the EPG. I have 2 dual tuner TV cards, a Leadtek Winfast dtv2000ds and a DVICO FusionHDTV Dual Tuner DVB-T. I must say that the DVICO card is more susceptible to signal fluctuations than the Leadtek. I also use the latest StreamedMP skin and MPExtended - pretty much the only skin and plug-ins I use (World Clock and HTPCInfo make up the rest). I have clonezilla images of my MP 1.3 and MP 1.4 setups so I can go back and forwards to check setups etc without much trouble. I did upgrade to MP 1.4 from MP 1.3. My PC is a 3rd gen i3-3220 CPU with Windows 7 SP 1 and all patches. I have 4GB RAM. My TV recordings and TimeShift Buffer are on a different drive to the system drive where MP runs from. One note, I previously, MP 1.2.3 got full system freeze with a rough audio. Need to do a complete system hard reset to fix. This has happened once or twice with MP 1.3 - don't think it has happened with MP 1.4 - Tuner settings and re-tuning seems to fix this - again, signal strength contributed to this issue I think. [/QUOTE]

Verification