TV-Server Version: uninstaled
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue3
Windows Version: WindowsXP Home, new instalation-completely updated with SP3
CPU Type: Intel Celeron 1.8GHz, 64 bit, type 430 in socket 775
HDD: Seagate Serial ATA 80GB, 7200ot.
Memory: 512MB in Dual Channel mode DDR2 667Mhz
Motherboard: MSI Mainboard G31 775,FSB1333
Video Card: GYGABYTE 256MB DDR2 in PCI-E 16x
Video Card Driver: NVidia
Sound Card: onboard
Sound Card AC3: onboard
Sound Card Driver:
1. TV Card: Twinhan VP-1030 with CAM Module Platinum X and firmware 3200 and CSLink smartcard
1. TV Card Type: DVB-S
1. TV Card Driver: BDA WHQL 1.2.3.8
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MP
MPEG2 Audio Codec: MP
h.264 Video Codec:
Satelite/CableTV Provider: CSLink
HTPC Case: ATX case
Cooling: Intel
Power Supply: 350W
Remote: Soundgraph iMon inside VFD
TV: DVI Monitor
TV - HTPC Connection: VGA
I have a problem with new HTPC. New instaled XP Home, new Mediaportal, new drivers, new Hardware. After about 10 minutes of watching pay tv, the picture will freeze. Then I close mediaportal and see to hardware window of XP and I see, that BDA878 Tuner driver has problem code 10 and I must remove drivers (878BDA Tuner Driver, 878BDA Capture driver), switch of PC(no restart) and Install this driver again. If I have removed CAM module platinumX from DVB-S card Twinhan VP-1030 and watching of FTA station, mediaportal is normaly function. If I switch to payed channel without Cam, Display is Black and I cannot switch to another station, only to Home screen. On another HTPC (older) witch Skystar 1 CI (VP1030 clone), I had the same problem.
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue3
Windows Version: WindowsXP Home, new instalation-completely updated with SP3
CPU Type: Intel Celeron 1.8GHz, 64 bit, type 430 in socket 775
HDD: Seagate Serial ATA 80GB, 7200ot.
Memory: 512MB in Dual Channel mode DDR2 667Mhz
Motherboard: MSI Mainboard G31 775,FSB1333
Video Card: GYGABYTE 256MB DDR2 in PCI-E 16x
Video Card Driver: NVidia
Sound Card: onboard
Sound Card AC3: onboard
Sound Card Driver:
1. TV Card: Twinhan VP-1030 with CAM Module Platinum X and firmware 3200 and CSLink smartcard
1. TV Card Type: DVB-S
1. TV Card Driver: BDA WHQL 1.2.3.8
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MP
MPEG2 Audio Codec: MP
h.264 Video Codec:
Satelite/CableTV Provider: CSLink
HTPC Case: ATX case
Cooling: Intel
Power Supply: 350W
Remote: Soundgraph iMon inside VFD
TV: DVI Monitor
TV - HTPC Connection: VGA
I have a problem with new HTPC. New instaled XP Home, new Mediaportal, new drivers, new Hardware. After about 10 minutes of watching pay tv, the picture will freeze. Then I close mediaportal and see to hardware window of XP and I see, that BDA878 Tuner driver has problem code 10 and I must remove drivers (878BDA Tuner Driver, 878BDA Capture driver), switch of PC(no restart) and Install this driver again. If I have removed CAM module platinumX from DVB-S card Twinhan VP-1030 and watching of FTA station, mediaportal is normaly function. If I switch to payed channel without Cam, Display is Black and I cannot switch to another station, only to Home screen. On another HTPC (older) witch Skystar 1 CI (VP1030 clone), I had the same problem.