MP1 EVR Presenter/dshowhelper community development (2 Viewers)

[Owlsroost]

Re: AW: MP1 EVR Presenter/dshowhelper community development

Seems like something was wrong cause I can't reproduce this issue anymore. Anyway.. I tried v0076 but the lines aren't as flat as in v0070. Attached screens and logs.

OK, good

(and the red & yellow lines on v0076 are not meant to be as flat as with v0070 - it's working correctly)

Tony

 

[Holzi]

AW: MP1 EVR Presenter/dshowhelper community development

Thank you!
So what do you suggest for me? v0070 or v0076? =) Or should I do some more tests and look at the framedrops?

 

[mrmojo666]

Hi TOny,

after 5 days of everyday use of v76_part i can say it wors like a charm.....i didn't noticed any issue


thank you for your great work


byeeeeeeeeee

 

[cabala]

Hi,

I tested the 55e and 76_part: DVD navigation seems to be broken. I use FFdshow as DVD decoder, S.O. WIN7 32bit.

For easy testing, use King Kong DVD, R2.

Bye!

 

[Owlsroost]

Hi,

I tested the 55e and 76_part: DVD navigation seems to be broken. I use FFdshow as DVD decoder, S.O. WIN7 32bit.

For easy testing, use King Kong DVD, R2.

Bye!

Exactly how is it broken - what doesn't work ?

I don't have King Kong DVD, R2.

Which version of dshowhelper do you normally use which does work ?

Tony

 

[cabala]

Hi,

version 37 works without any problem. Navigation problems affect the Menu: it's not possible to move between the buttons. The same thing happened with the official older version of dshowhelper, look at this: https://forum.team-mediaportal.com/...-freeze-musik-plays-bit-when-using-evr-78802/

Bye!

 

[cecet23]

Ok Owlsroost, I did some more testing.

Initial results
HD 23.9 and 24fps are Perfect.
SD 24fps perfect
SD 25fps, judder every half/whole second. Not visible in the lines, but I DO see the moving judders. Even in the 2 lines going from left to right.
I noticed this judder ia only present on SD25fps, while the TV is set at 50hz. First I tried to get a perfect match. 25fps/25hz, But MP wont switch to it, even if I tried it before.
Second thing I tried was reducing the de-interlacing setting from VA to adaptive. After this the visible judder is gone. Also, the lines are more flat now.

So Im thinking using 25fps on a 50hz monitor, makes my ATI or codecs think they need to de-interlace the stuff, resulting in judders. The fact it results in judders is weird as well. The card I use should be more than capable of handling it. (HD5670)

What are your thought about this?

Can you post an evr.log please ?

I do test with some true 25fps material on a 50Hz display (my digital still camera shoots 25fps 720p h.264 video) and it always plays OK on my (nVidia) system.

Quite often the video decode filters assume at the beginning that the material needs to be deinterlaced because they don't really know for sure until they actually decode it, then the deinterlacing should adapt itself as the stream plays. Note all this happens before the EVR presenter gets the decoded/deinterlaced samples (frames) - it then just uses the sample timestamps to decide when to present (render) the samples to the screen.

Tony

I have this problem too, and it happen only on sd avi (ffdshow as a codec), in 720p - 1080p I have not problem..
I'm using a lot of subtitle (in a separate file .srt) when I watch my sd files, could be influential?
I'm using v055c do you need evr.log? or do you prefer evr.log with v0073?

Seems that happen with h264 and sperated .srt files with 76_part too... asap I'll post evr.log... thx

 

[Owlsroost]

Hi,

version 37 works without any problem. Navigation problems affect the Menu: it's not possible to move between the buttons. The same thing happened with the official older version of dshowhelper, look at this: https://forum.team-mediaportal.com/...-freeze-musik-plays-bit-when-using-evr-78802/

Bye!

OK....

I need logs please !!

Do the buttons highlight ?

If you try to move between buttons what happens - does it not move at all, or does it move and then flick back ?

Does it happen with all DVD menus (or just on a few disks) ?

Can you try this version - http://sources.team-mediaportal.com/websvn/filedetails.php?repname=MediaPortal&path=%2Ftrunk%2Fmediaportal%2FCore.cpp%2FDirectShowHelper%2Fbin%2FRelease%2Fdshowhelper.dll&sc=1 - this is the MP 1.2.0 trunk version (v55)

Tony

 

[cabala]

Do the buttons highlight ? YES

If you try to move between buttons what happens - does it not move at all, or does it move and then flick back ? THE SECOND ONE

Does it happen with all DVD menus (or just on a few disks) ? WITH SOME DISKS ONLY (ANYWAY, MANY DISKS...)

Can you try this version - http://sources.team-mediaportal.com/websvn/filedetails.php?repname=MediaPortal&path=%2Ftrunk%2Fmediaportal%2FCore.cpp%2FDirectShowHelper%2Fbin%2FRelease%2Fdshowhelper.dll&sc=1 - this is the MP 1.2.0 trunk version (v55)

THIS VERSION SEEMS TO BE OK, ONLY SOME SMALL PROBLEMS WITH H264 HD TV (SOME STUTTERING DURING THE FIRST MINUTE): WIN7, MICROSOFT DTV DECODER.

Bye!

 

[Owlsroost]

Do the buttons highlight ? YES

If you try to move between buttons what happens - does it not move at all, or does it move and then flick back ? THE SECOND ONE

Does it happen with all DVD menus (or just on a few disks) ? WITH SOME DISKS ONLY (ANYWAY, MANY DISKS...)

Can you try this version - http://sources.team-mediaportal.com/websvn/filedetails.php?repname=MediaPortal&path=%2Ftrunk%2Fmediaportal%2FCore.cpp%2FDirectShowHelper%2Fbin%2FRelease%2Fdshowhelper.dll&sc=1 - this is the MP 1.2.0 trunk version (v55)

THIS VERSION SEEMS TO BE OK, ONLY SOME SMALL PROBLEMS WITH H264 HD TV (SOME STUTTERING DURING THE FIRST MINUTE): WIN7, MICROSOFT DTV DECODER.

Bye!

OK, so if v55 works, can you try v55a, v55b, v55c and tell me which versions work OK please ?

Which DVD navigator filter are you using ?

Tony