My 310i work at half ??? (1 Viewer)

[Cesto]

This is my CaptureCardDefinitions.xml
Driver of 310i is Ver. 1.3.3.0 becouse if upgrade it, mediaportal not recognize tv turner.
In MP setup
Video codec: VOB MPEG2
Audio codec: AC3Filter

<?xml version="1.0"?>
<capturecards>
<capturecard commercialname="Pinnacle PCTV 310i DVBT" capturename="Pinnacle PCTV 310i BDA Digital Capture" devid="ven_1131&amp;dev_7133&amp;subsys_002f11bd&amp;rev_d1">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="true"/>
<tv>
<interface cat="capture" video="2" audio="3" mpeg2="1" sectionsandtables="5"/>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"/>
<filter cat="tunerdevice" name="Pinnacle PCTV 310i BDA DVBT Tuner" checkdevice="true"/>
<filter cat="capture" name="Pinnacle PCTV 310i BDA Digital Capture" checkdevice="true"/>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"/>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
</connections>
</tv>
</capturecard>

<capturecard commercialname="Pinnacle PCTV 310i Analogue" capturename="Pinnacle PCTV 310i BDA Analog Capture" devid="ven_1131&amp;dev_7133&amp;subsys_002f11bd&amp;rev_d1">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="Pinnacle PCTV 310i BDA Analog TV Tuner" checkdevice="true"/>
<filter cat="tvaudio" name="Pinnacle PCTV 310i BDA Analog TV Audio" checkdevice="true"/>
<filter cat="crossbar" name="Pinnacle PCTV 310i BDA Analog Xbar" checkdevice="true"/>
<filter cat="capture" name="Pinnacle PCTV 310i BDA Analog Capture" checkdevice="true"/>
<filter cat="videncoder" name="%videoencoder%" checkdevice="false"/>
<filter cat="audencoder" name="%audioencoder%" checkdevice="false"/>
<filter cat="mux" name="%mpegmux%" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="3" sinkfilter="audencoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"/>
</connections>
</tv>
</capturecard>
</capturecards>

I have a little/big problem video is not syncronize with audio in analogue TV.
Can u help me ??? pls

 

[hunters77]

Seems that ther is a lot of people having problems with this TV card... If you read some posts before, you can see I have the same problems...
But...
You are telling me that with old tv card drivers you are able to make MP recognize both analogue and digital part of the card??
This is a good news...
What version of MP are you using?
All ok with digital part of tv card?

Hi, Hunter

 

[Cesto]

Ver. MP

I use MP Ver. 0.2.3 RC1
digital TV is ok !!! but analogue TV is very bad...

 

[Cesto]

Anyone have suggestion ???

Anyone can help me ???