MyTV isnt working anymore (RC2 / Aopen VA2000N NVTV) (1 Viewer)

[dman_lfc]

Well it's difficult to fix without having one.
If someone's in the UK & can lend me one then that may help.

DMAN

 

[swifty]

Unfortunately my card is in use within MCE 2005 and I'd probably get shot if I removed that from the living room for a week or two! :lol:
I'd be happy to tinker about with any suggestions or gather any info on the hardware etc if its of any use...

 

[swifty]

Guys, I have TV working under RC3 !!
I've posted info here
This is just RC3 with no SVN, I will test the latest SVN tomorrow and see how it goes

 

[swifty]

Don't know if anyone if following this but I have tried the latest SVN and it works fine.
I investigated the problem further and found that its the file "dvxplore.sys" from the Nvidia WHQL 1.20.45 driver pack that causes the problem.. if I use these drivers with the dvxplore.sys from 1.20.19 then Mediaportal TV works ok.
Strange stuff, I also noticed that on the InnoDV website the 1.20.45 drivers are listed for a DV3400 card, whereas the 1.20.19 drivers are for DV3300 which is what MP detects my card as.. even though with full 1.20.45 drivers (supposedly for DV3400) the Windows Mediacenter front end works fine :?
Anyone confirm or destroy my theory ? :lol:

 

[Wibo]

I'll give it a try later. Sounds hopefull though!

Regards, wibo

 

[Flippy]

Don't know if anyone if following this but I have tried the latest SVN and it works fine.
I investigated the problem further and found that its the file "dvxplore.sys" from the Nvidia WHQL 1.20.45 driver pack that causes the problem.. if I use these drivers with the dvxplore.sys from 1.20.19 then Mediaportal TV works ok.
Strange stuff, I also noticed that on the InnoDV website the 1.20.45 drivers are listed for a DV3400 card, whereas the 1.20.19 drivers are for DV3300 which is what MP detects my card as.. even though with full 1.20.45 drivers (supposedly for DV3400) the Windows Mediacenter front end works fine :?
Anyone confirm or destroy my theory ? :lol:

What is SVN and where can i download it?

btw. did everybody get this working now?

 

[ghajj]

NVTV dvxplore.sys

Could some be kind and post the older version of dvxplore.sys 1.20.19 or the whole 1.20.19 nvtv whql

Thanks

 

[BennieBoy]

Hi,

from within the configuration I still get the "unable to build graph for this card". I think replacing the dvxplore.sys, as proposed earlier, only solves the gray screen some people have.

BTW, I'm working with the 2.0 RC4 release.
ANybody got this working with a NVTV card? (I'm having a POV NVTV Pal card, which is identified as an AOPEN, just like the XFX NVTV cards)

Greetz,
Ben

 

[rictec]

please check if this is a good update procedure

i do a copy of the dull team mediaportal dir to another location
go to control panel and remove mediaportal
then do a install of the RC4 version

if it works ok i will post it here if not what files do you need to see?

i do exactly the some to put 1.1.3 back just after install i replace all files with my backup

i will try RC4 and post my findings

Rictec
xfx nvtv single tuner and nvidia 6600 vga card

 

[rictec]

someone can please see these files?

here is a something i found from version 1.1.3 tv image ok and version RC4 tv image grey

FILTER ID="SBE_SINK" clsid="{2DB47AE5-CF39-43C2-B4D6-0CD8D90946F4}
FILTER ID="Sample_Grabber" clsid="{C1F400A0-3F08-11D3-9F0B-006008039E37}
FILTER ID="WST_Codec" clsid="{17CCA71B-ECD7-11D0-B908-00A0C9223196}

those two Sample_Grabber and WST_codecs doesnt appear in 1.1.3
maybe thhe problem is there


Rictec