Reply to thread

Message

<blockquote data-quote="carlo_0000" data-source="post: 877137" data-attributes="member: 101671">hello&nbsp;i use manual scan, so i scan only what i need and after each scan i delete the channel i don't need, to keep database smal and fasterand olso automatic scan on omnicom is not working it does crazy stuff&nbsp;&nbsp;i tested the scan on all ports because maybe i reversed some cables&nbsp; when puting the 2 diesq back, but cableare at good place&nbsp;the knc isport 1 = Hotbird 13E?port 2 = Astra 19 Eport 3 = Astra 23 Eport 4 = Astra 28 E&nbsp;omicomport 1 = eutelsat 9Eport 2 = Astra 19 Eport 3 = Eutelsat 5Wport 4 = Astra 28 E&nbsp;&nbsp;strange i tested to scan once today, and it work on the knc, , all i did sins last scan, poweroff the computer and add a hard drive&nbsp;omicom is still not working&nbsp;you said &quot;The Omicom tuner is not sending DiSEqC commands at all - MP TV Server does not yet support DiSEqC for Omicom tuners.&quot;&nbsp;but on my old computer i was able to use it&nbsp; but with some trouble, i had sometimes to move to an channel from an other sat and come back for it works&nbsp;&nbsp;&nbsp;&quot;&quot;When you scan, I strongly recommend that you set the inner FEC rate. Also, if you're scanning DVB-S2 transponders use modulation &quot;QPSK&quot; for DVB-S2 QPSK and &quot;8 PSK&quot; for DVB-S2 8 PSK.&quot;&quot;&nbsp;i can do it but it did autodetect it in the past so i asume it still working now&nbsp;&nbsp;thanks for help&nbsp;maybe i must go to an older mp build, because i used the omicom all for 1 year, i had the diseq working on at lease 2 portsi don't know if there is a driver update because last time i cheeked the website was dead&nbsp;&nbsp;is there a way to enable slave server? and use it at my onw risk</blockquote>

[QUOTE="carlo_0000, post: 877137, member: 101671"] hello i use manual scan, so i scan only what i need and after each scan i delete the channel i don't need, to keep database smal and faster and olso automatic scan on omnicom is not working it does crazy stuff i tested the scan on all ports because maybe i reversed some cables when puting the 2 diesq back, but cableare at good place the knc is port 1 = Hotbird 13E? port 2 = Astra 19 E port 3 = Astra 23 E port 4 = Astra 28 E omicom port 1 = eutelsat 9E port 2 = Astra 19 E port 3 = Eutelsat 5W port 4 = Astra 28 E strange i tested to scan once today, and it work on the knc, , all i did sins last scan, poweroff the computer and add a hard drive omicom is still not working you said "The Omicom tuner is not sending DiSEqC commands at all - MP TV Server does not yet support DiSEqC for Omicom tuners." but on my old computer i was able to use it but with some trouble, i had sometimes to move to an channel from an other sat and come back for it works ""When you scan, I strongly recommend that you set the inner FEC rate. Also, if you're scanning DVB-S2 transponders use modulation "QPSK" for DVB-S2 QPSK and "8 PSK" for DVB-S2 8 PSK."" i can do it but it did autodetect it in the past so i asume it still working now thanks for help maybe i must go to an older mp build, because i used the omicom all for 1 year, i had the diseq working on at lease 2 ports i don't know if there is a driver update because last time i cheeked the website was dead is there a way to enable slave server? and use it at my onw risk [/QUOTE]

Verification