New override to LNB frequencies not saving.. (1 Viewer)

[GagReflex]

Absolutely thrilled to see the new options to override the default LNB low/hi/switch frequencies..

Unfortunately if I tick the box to over-ride and add the frequencies in, they dont save.. So close and yet......

BTW this is with version 13135
Many thanks.....

 

[GagReflex]

Settings still not saving in ver 13147

 

[Rhys.Goodwin]

Hi I can confirm that the settings are being saved for me after doing a scan HOWEVER I'm sorry to confirm that the settings have no effect!

Transponder File:

1=12671,V,22500 [B]-This is the correct freq of the transponder[/B]
2=11971,V,22500 [B]-This is the recalculated work around freq for the 10600 LNB setting[/B]

Even when I enable the lnb override I still don't find channels on 12671Mhz but I do find channels on 11971 (As I did before the override feature was added).

My log states that it is using the override lnb settings but it's not; it's still using 10600mhz :

6/03/2007 11:29:58 a.m. LNB low:11300 hi:11300 switch:0

*EDIT* I should have said; I'm using a skystar2 with beta BDA driver.

Regards,
Rhys

 

[GagReflex]

Agreed.. The LNB overide settings are saved AFTER you scan.
I'm also seeing the same issue, after changing my LNB settings to 10700 I can't find any channels during the scan.. In the log it shows:

9/03/2007 11:15:53 AM LNB low:9750 hi:10600 switch:11700
9/03/2007 11:15:53 AM Twinhan: SetLnb diseqc port:0 22khz:2 low:9750 hi:10600 switch:11700 power:True
9/03/2007 11:15:53 AM TwinHan SetLNB ok 0x0

No mention of the 10700 override?

I've attached the logs

 

[GagReflex]

Just had a quick look at the source..
The server wasn't using the modified freq's during the scan for channels (Which explains why we couldn't find any). I modified the source, compiled and all looks good, could scan for channels in the TVServer and watch them afterwards in MP.
The change made, only affects those of us with non standard LNB freq's.

I'll include the source here, hoping someone knows how to get it into 'production'
The changes I've made are pretty obvious and well commented..
Code is current as of Rev 13389

 

[Rhys.Goodwin]

Nice one Brotha!

 

[GagReflex]

Frodo has put the fix in..
Many thanks..

 

[Rhys.Goodwin]

Thanks heaps Frodo and GagReflex. Tested and works fine.
Cheers,
Rhys