TV-Server Version:
MediaPortal Version: 0.2.2.0
MediaPortal Skin: Default
Windows Version: XP Pro SP2
CPU Type: AMD X2 5200+ AM2
HDD: 200GB SATAII Samsung SpinPoint
Memory: 4GB Crucial DDR2 800Mhz
Motherboard: MSI K9N-Neo
Motherboard Chipset: nVidia nForce 550 AMD
Motherboard Bios: ?
Video Card: Gigabyte nVidia GeForce 7600GT PCI-E(x16)
Video Card Driver: ForceWare 163.71
Sound Card: Onboard Realtek HD
Sound Card AC3: ?
Sound Card Driver: ?
1. TV Card: Technotrend Budget S2-3200
1. TV Card Type: PCI DVB-2/S2 card
1. TV Card Driver: 4.4.10.18?
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD
MPEG2 Audio Codec: Realtek HD
Satelite/CableTV Provider: Astra/Eutelsat @ 28.2E/28.5E
HTPC Case:
Cooling: Zalman AM2 Aero Flower
Power Supply: 500W NorthQ
Remote: None at the moment
TV: Monitor 17" Optiquest CRT
TV - HTPC Connection: DVI to VGA
I all, I just got MP installed and am very impresse with the appearance and all the program has to offer but i cannot get it to work
:
I tried reinstalling MP and did a repair to NetFramework but it still does not work.
Any ideas?
Bob
MediaPortal Version: 0.2.2.0
MediaPortal Skin: Default
Windows Version: XP Pro SP2
CPU Type: AMD X2 5200+ AM2
HDD: 200GB SATAII Samsung SpinPoint
Memory: 4GB Crucial DDR2 800Mhz
Motherboard: MSI K9N-Neo
Motherboard Chipset: nVidia nForce 550 AMD
Motherboard Bios: ?
Video Card: Gigabyte nVidia GeForce 7600GT PCI-E(x16)
Video Card Driver: ForceWare 163.71
Sound Card: Onboard Realtek HD
Sound Card AC3: ?
Sound Card Driver: ?
1. TV Card: Technotrend Budget S2-3200
1. TV Card Type: PCI DVB-2/S2 card
1. TV Card Driver: 4.4.10.18?
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink PowerDVD
MPEG2 Audio Codec: Realtek HD
Satelite/CableTV Provider: Astra/Eutelsat @ 28.2E/28.5E
HTPC Case:
Cooling: Zalman AM2 Aero Flower
Power Supply: 500W NorthQ
Remote: None at the moment
TV: Monitor 17" Optiquest CRT
TV - HTPC Connection: DVI to VGA
I all, I just got MP installed and am very impresse with the appearance and all the program has to offer but i cannot get it to work
- When I was doing the initial channel scan in MP Setup, windows would say that "MP has encountered an error and needs to close". This would happen at random intervals so I manually shortend the transponder list to two transponders so that it would complete successfully.
- Then everything that I do in MyTV produces a blank error:
http://saiorse44.com/mytv_error.jpg
- The other thing is that TV will not play. PIDs and frequencies are set correctly but i just see black and there is no audio. Local AVIs and MPEGs play back fine. Live TV works fine in DVBviewer.
I tried reinstalling MP and did a repair to NetFramework but it still does not work.
Any ideas?
Bob
United Kingdom