Netherlands
Hello,
been messing around with this, hopefully you can help.
I installed MediaPortal, including the TV server. I set it up and it all appears to work ok. It's a Zolid hybrid tuner, but shows up as Philips in device manager. I configured the card as a hybrid, though I only use the digital tuner. It finds the channels, I can preview them and they show fine in MediaPortal. However, after a reboot, MediaPortal reports 'no signal', and the preview reports the same. All channels are still listed in TV server config under TV Channels with the right frequencies, but they won't work.
If I then select the digital tuner and click 'Scan for all channels', it is fixed. Even if I immediately click 'cancel' afterwards. It appears as if the tuner needs to wake up or something. As soon as it has scanned for some seconds, all channels will work again.
I guess I overlooked something simple, but can't seem to figure it out.
I attached some logs, it should show me doing the following:
- Scan for all channels
- Open MediaPortal > TV works
- Reboot
- Open MediaPortal > TV doesn't work
- Open TV Server config > scan for some seconds for channels, then cancel
- Open MediaPortal > TV works
Thanks in advance for any help!
MediaPortal Version: 1.0.2
MediaPortal Skin: default
Windows Version: XP SP3
CPU Type: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
HDD: C: 74,5GB | E: 465,8GB
Memory: 1022 MB
Motherboard: Dell Inc. 0TY565
Video Card: ATI Radeon HD 2400 Pro
Video Card Driver: 8.383.1.1110
Sound Card: SoundMAX HD Audio
Sound Card AC3:
Sound Card Driver:
1. TV Card: Philips SAA7133/35, Hybrid Capture Device
1. TV Card Type: DVB-T / Analog
1. TV Card Driver: 1.3.4.5
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
been messing around with this, hopefully you can help.
I installed MediaPortal, including the TV server. I set it up and it all appears to work ok. It's a Zolid hybrid tuner, but shows up as Philips in device manager. I configured the card as a hybrid, though I only use the digital tuner. It finds the channels, I can preview them and they show fine in MediaPortal. However, after a reboot, MediaPortal reports 'no signal', and the preview reports the same. All channels are still listed in TV server config under TV Channels with the right frequencies, but they won't work.
If I then select the digital tuner and click 'Scan for all channels', it is fixed. Even if I immediately click 'cancel' afterwards. It appears as if the tuner needs to wake up or something. As soon as it has scanned for some seconds, all channels will work again.
I guess I overlooked something simple, but can't seem to figure it out.
I attached some logs, it should show me doing the following:
- Scan for all channels
- Open MediaPortal > TV works
- Reboot
- Open MediaPortal > TV doesn't work
- Open TV Server config > scan for some seconds for channels, then cancel
- Open MediaPortal > TV works
Thanks in advance for any help!
MediaPortal Version: 1.0.2
MediaPortal Skin: default
Windows Version: XP SP3
CPU Type: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
HDD: C: 74,5GB | E: 465,8GB
Memory: 1022 MB
Motherboard: Dell Inc. 0TY565
Video Card: ATI Radeon HD 2400 Pro
Video Card Driver: 8.383.1.1110
Sound Card: SoundMAX HD Audio
Sound Card AC3:
Sound Card Driver:
1. TV Card: Philips SAA7133/35, Hybrid Capture Device
1. TV Card Type: DVB-T / Analog
1. TV Card Driver: 1.3.4.5
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection: