Noobie: Twinhan 102g (2 Viewers)

[nbpanjwa]

Well, if that is the case then how come I don't see any NA Satellites (such as Echostar) listed in DVB Satellite Setup?

I have one more question, is there any step by step guide to setup MP for NA users? I really like MP and I'm trying hard to make it work for me.

 

[dman_lfc]

Well, if that is the case then how come I don't see any NA Satellites (such as Echostar) listed in DVB Satellite Setup?

I have one more question, is there any step by step guide to setup MP for NA users? I really like MP and I'm trying hard to make it work for me.

Becuase no one has sent me a TPL file for the satellites you're trying to reach.
Have a look @ the TuningParameters directory.
There you'll see the TPL's. Open one with notepad and you'll see the format required.

Example:

12707,V,22500
Frequency,Polarity,Symbol Rate

I have asked this many times but never got a file.
Information can be gleened from here as an example...
http://www.lyngsat.com/america.html

Note: R = V & L = H

DMAN

 

[nbpanjwa]

I have compiled a tpl file for Echostar 3. How could I attach it with my post or if you like me to send it via email please provide me your email address.

 

[nbpanjwa]

Scan Echostar 3 and Echostar 7 with no results. I used LOF1=97500; SW=11700; and LOF2:11250

PLEASE can someone guide me how to get better results with NA satellite scan?

 

[dman_lfc]

Hrmmmm

LOF1=9750
LOF2=10600

Also try...

DiSEqC = None, LNB = KU-Band, Tone = 22KHz

DMAN

 

[nbpanjwa]

Tried that. This time it shows signal strength and signal quality while scaning satellite, however, at the end 0 channel found. I have sent you screenhot-4 via email for better understanding.

 

[ace_rimmer]

HI
i have been reading and reading and still haven't found a way to get the BDA drivers to load and work on the 102g...twinhans site says they are supported ..but no go for install always invalidates the driver as being a valid device..any input would be helpfull thanks .

 

[ace_rimmer]

Update issue solved ,seems the twinhan and my nvidia pcie graphics card were conflicting although all was well according to windows device manager...removed video card used onboard video"intel graphic" driver loaded without an issue replaced pcie back into the machine .

 

[Krisek]

WHat drivers do you use any special setup plzz provide me with link..
Thank You

 

[debennett2]

To whomever got the Twinhan card working, can you please detail what drivers you used? I am using the latest offical 1207 drivers on my Twinhan 1207 (bda) and cannot get mp to detect the card. ANY pointers are GREATLY appreciated.