Not able to scan any channels/satelites (2 Viewers)

[fedde]

MediaPortal Version: 1.1 Beta
MediaPortal Skin: Blue3wide
Windows Version: Windows XP SP 3
CPU Type: Intel 2.8ghz
HDD: 80gb Western
Memory: 1024 DDR
Motherboard: ASROCK P4I65G
Video Card: Onboard Intel Extreme
Video Card Driver: none
Sound Card: Onboard Realtek
Sound Card AC3:
Sound Card Driver:
1. TV Card: Asus
1. TV Card Type: ASUS My Cinema-PS3-100, DVB-S
1. TV Card Driver: 1.3.3.5.4
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV: Samsung 40" LCD
TV - HTPC Connection: DVI

Hi all
Trying to figure out this setup. Somehow it will not scan satelites. I removed the diseq also so the card has only one satelite. Fresh install of XP, updatet and installed rev23491 on a clean install. Worked 1 time to scan satelite. MEssed around abit and suddenly it went to unable to create graph. After not finding that out, i wiped XP and did a reinstall again. But this time i can not scan any channels at all.

TSwriter.log on server :

30-09-2009 09:02:10.62 CMpTsFilter::Pause()
30-09-2009 09:02:10.937 CMpTsFilter::Run()
30-09-2009 09:02:13.187 del m_pVideoAnalyzer
30-09-2009 09:02:13.187 analyzer: reset
30-09-2009 09:02:13.187 del m_pPmtGrabber
30-09-2009 09:02:13.187 del m_pRecorder
30-09-2009 09:02:13.187 del m_pTimeShifting
30-09-2009 09:02:13.187 del m_pTeletextGrabber
30-09-2009 09:02:13.187 del m_pCaGrabber
30-09-2009 09:02:13.187 del done...
30-09-2009 09:02:13.203 CMpTsFilter::Pause()
30-09-2009 09:02:13.218 CMpTsFilter::Stop()
30-09-2009 09:02:13.281 analyzer: reset
30-09-2009 09:02:13.281 cagrabber: reset
30-09-2009 09:02:13.296 epg: reset
30-09-2009 09:02:13.296 epg:ResetEPG()
30-09-2009 09:02:13.296 mhw reset
30-09-2009 09:02:14.171 CMpTsFilter::Pause()
30-09-2009 09:02:15.140 CMpTsFilter::Run()
30-09-2009 09:02:17.390 del m_pVideoAnalyzer
30-09-2009 09:02:17.390 analyzer: reset
30-09-2009 09:02:17.390 del m_pPmtGrabber
30-09-2009 09:02:17.390 del m_pRecorder
30-09-2009 09:02:17.390 del m_pTimeShifting
30-09-2009 09:02:17.390 del m_pTeletextGrabber
30-09-2009 09:02:17.390 del m_pCaGrabber
30-09-2009 09:02:17.390 del done...
30-09-2009 09:02:17.406 CMpTsFilter::Pause()
30-09-2009 09:02:17.421 CMpTsFilter::Stop()
30-09-2009 09:02:17.578 analyzer: reset
30-09-2009 09:02:17.578 cagrabber: reset
30-09-2009 09:02:17.625 epg: reset
30-09-2009 09:02:17.625 epg:ResetEPG()
30-09-2009 09:02:17.625 mhw reset

TV.log says this

2009-09-30 09:02:17.390625 [6]: tvcard:FreeSubChannel: subchannels count 1 subch#0 keep graph=False
2009-09-30 09:02:17.390625 [6]: DVB subch:0 Decompose()
2009-09-30 09:02:17.390625 [6]: FreeSubChannel CA: freeing sub channel : 0
2009-09-30 09:02:17.390625 [6]: tvcard:FreeSubChannel : no subchannels present, stopping graph
2009-09-30 09:02:17.406250 [6]: dvb:StopGraph called
2009-09-30 09:02:17.406250 [6]: tvcard:FreeAllSubChannels:
2009-09-30 09:02:17.406250 [6]: dvb:StopGraph
2009-09-30 09:02:17.578125 [6]: dvbs:  Tune:DVBS:tv:  Freq:11823000 ONID:-1 TSID:-1 SID:-1 PMT:0xFFFFFFFF FTA:False LCN:10000 SymbolRate:27500 Modulation:ModNotSet Polarisation:LinearV InnerFecRate:Rate3_4 DisEqc:None band:Universal Pilot:NotSet RollOff:NotSet
2009-09-30 09:02:17.578125 [6]: dvb:GetNewSubChannel:0 #0
2009-09-30 09:02:17.578125 [6]: TvDvbChannel ctor new subchIndex:0
2009-09-30 09:02:17.593750 [6]: LNB low:9750 hi:10600 switch:11700
2009-09-30 09:02:17.609375 [6]:   Channel modulation is set to ModNotSet
2009-09-30 09:02:17.609375 [6]:   Channel FECRate is set to Rate3_4
2009-09-30 09:02:17.609375 [6]: dvb:Submiting tunerequest Channel: subChannel:0 
2009-09-30 09:02:17.609375 [6]: dvb:using existing subchannel:0
2009-09-30 09:02:17.609375 [6]: dvb:Submit tunerequest size:1 new:0
2009-09-30 09:02:17.609375 [6]: subch:0 OnBeforeTune
2009-09-30 09:02:17.625000 [6]: dvb:Submit tunerequest calling put_TuneRequest
2009-09-30 09:02:19.093750 [6]: dvb:Submit tunerequest done calling put_TuneRequest
2009-09-30 09:02:19.093750 [6]: subch:0 OnAfterTune
2009-09-30 09:02:19.109375 [6]: subch:0 OnGraphStart
2009-09-30 09:02:19.109375 [6]: subch:0 Graph already running - skip WaitForPMT
2009-09-30 09:02:19.109375 [6]: dvb:  RunGraph
2009-09-30 09:02:20.734375 [6]: dvb:  LockedInOnSignal waiting 20ms
2009-09-30 09:02:20.765625 [6]: dvb:  LockedInOnSignal waiting 20ms
2009-09-30 09:02:20.796875 [6]: dvb:  LockedInOnSignal waiting 20ms
2009-09-30 09:02:20.828125 [6]: dvb:  LockedInOnSignal waiting 20ms
2009-09-30 09:02:20.859375 [6]: dvb:  LockedInOnSignal waiting 20ms
2009-09-30 09:02:22.765625 [6]: dvb:  LockedInOnSignal could not lock onto channel - no signal or bad signal
2009-09-30 09:02:22.765625 [6]: tvcard:FreeSubChannel: subchannels count 1 subch#0 keep graph=False
2009-09-30 09:02:22.765625 [6]: DVB subch:0 Decompose()
2009-09-30 09:02:22.765625 [6]: FreeSubChannel CA: freeing sub channel : 0

Error log is clean.

Also tried with latest SVN version with no help. SHuld i downgrade more to 1.02 or even lower? This is just a TV server providing DVB-S channels to the network here.

Thanks for any help.