Reply to thread

Message

<blockquote data-quote="Cypsteel" data-source="post: 352797" data-attributes="member: 83655">On 119, I have all horizontal and vertical working.&nbsp; You have to run them through the calculation to convert the horizontal to vertical.&nbsp; For example, my list of transponders on 119 is:[SATTYPE]1=24102=Echostar 7, DirecTV 7S &amp; Anik F3[DVB]0=201=12224,V,20000,562=12253,V,20000,563=12282,V,20000,564=12311,V,20000,565=12341,V,20000,566=12370,V,20000,787=12399,V,20000,568=12457,V,20000,569=12486,V,20000,3410=12516,V,20000,5611=13099,V,20000,5612=13128,V,20000,5613=13157,V,20000,5614=13186,V,20000,5615=13216,V,20000,5616=13245,V,20000,5617=13274,V,20000,5618=13303,V,20000,5619=13332,V,20000,5620=13361,V,20000,56Notice the horizontals have been converted to verticals by using:&nbsp; &nbsp; 25600 - Horizontal Freq = Vertical FreqTHIS WORKS PERFECTLY ON LNB1.&nbsp; I get all channels with the above settings.I have done this same thing to my LNB2 pointed at 110 and I can only get about 3 transponders in MediaPortal.&nbsp; Both LNB's work fine in DVB Dream and MyTheatre...The weird thing is that I only get the &quot;spot&quot; transponders and none of the conus transponders.&nbsp; I think this bit of information is the key to the answer.&nbsp;&nbsp; I think there is an answer there, we just need to find it.</blockquote>

[QUOTE="Cypsteel, post: 352797, member: 83655"] On 119, I have all horizontal and vertical working. You have to run them through the calculation to convert the horizontal to vertical. For example, my list of transponders on 119 is: [SATTYPE] 1=2410 2=Echostar 7, DirecTV 7S & Anik F3 [DVB] 0=20 1=12224,V,20000,56 2=12253,V,20000,56 3=12282,V,20000,56 4=12311,V,20000,56 5=12341,V,20000,56 6=12370,V,20000,78 7=12399,V,20000,56 8=12457,V,20000,56 9=12486,V,20000,34 10=12516,V,20000,56 11=13099,V,20000,56 12=13128,V,20000,56 13=13157,V,20000,56 14=13186,V,20000,56 15=13216,V,20000,56 16=13245,V,20000,56 17=13274,V,20000,56 18=13303,V,20000,56 19=13332,V,20000,56 20=13361,V,20000,56 Notice the horizontals have been converted to verticals by using: 25600 - Horizontal Freq = Vertical Freq THIS WORKS PERFECTLY ON LNB1. I get all channels with the above settings. I have done this same thing to my LNB2 pointed at 110 and I can only get about 3 transponders in MediaPortal. Both LNB's work fine in DVB Dream and MyTheatre... The weird thing is that I only get the "spot" transponders and none of the conus transponders. I think this bit of information is the key to the answer. I think there is an answer there, we just need to find it. [/QUOTE]

Verification