United States of America
MediaPortal Version: 1.1.3
MediaPortal Skin:
Windows Version: Win7 Ultimate SP1
CPU Type: Intel C2D E8400 3.0Ghz
HDD: 6 x 1TB Hitachi and WD
Memory: 8GB
Motherboard: gigabyte ga-e7aum-ds2h
Video Card: onboard Nvidia 9400
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge PVR-500
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card: Hauppauge PVR-500
2. TV Card Type: Analog
2. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: Comcast
HTPC Case:
Cooling:
Power Supply:
Remote: Logitec Harmony 880 w/ WMC IR receiver
TV: Sharp Aquos 42"
TV - HTPC Connection: HDMI
I have noticed an odd channel issue. When I try to input manually the channel I want to tune to it does not go to that channel but rather a different one. I have tracked this down to what I think is a channel mapping issue but am unsure where to fix it in the configuration and on what machine. I have my tuners in a separate machine and have used only the tv server setup for it. I have tv working fine except this manual tuning issue. My channels go as follows:
2
3
4
6
7
8
9
10
etc....
However if I try to tune to a channel manually it goes like this:
button pressed/channel tuned
2/3
3/4
4/6
6/7
7/9
8/10
9/11
10/12
etc.
This is very odd. This is all tuning on any other machine setup as a client. I have checked all settings I can find to no avail. Any ideas?
Please disregard. I finally found the issue. I had the channel by index (non-US) checked on the clients. I knew it had to be something simple.
MediaPortal Skin:
Windows Version: Win7 Ultimate SP1
CPU Type: Intel C2D E8400 3.0Ghz
HDD: 6 x 1TB Hitachi and WD
Memory: 8GB
Motherboard: gigabyte ga-e7aum-ds2h
Video Card: onboard Nvidia 9400
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge PVR-500
1. TV Card Type: Analog
1. TV Card Driver:
2. TV Card: Hauppauge PVR-500
2. TV Card Type: Analog
2. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: Comcast
HTPC Case:
Cooling:
Power Supply:
Remote: Logitec Harmony 880 w/ WMC IR receiver
TV: Sharp Aquos 42"
TV - HTPC Connection: HDMI
I have noticed an odd channel issue. When I try to input manually the channel I want to tune to it does not go to that channel but rather a different one. I have tracked this down to what I think is a channel mapping issue but am unsure where to fix it in the configuration and on what machine. I have my tuners in a separate machine and have used only the tv server setup for it. I have tv working fine except this manual tuning issue. My channels go as follows:
2
3
4
6
7
8
9
10
etc....
However if I try to tune to a channel manually it goes like this:
button pressed/channel tuned
2/3
3/4
4/6
6/7
7/9
8/10
9/11
10/12
etc.
This is very odd. This is all tuning on any other machine setup as a client. I have checked all settings I can find to no avail. Any ideas?
Please disregard. I finally found the issue. I had the channel by index (non-US) checked on the clients. I knew it had to be something simple.