- February 7, 2005
- 39
- 0
- Home Country
-
Italy
yesterday i have tried in my htpc rc2 with last cvs that add again support for this card, it was recognized but an "unable to create graph" for two time stop all configuration.
i have take a look in definitions.......
<capturecard commercialname="Pinnacle PCTV 300i Analogue" capturename="Pinnacle PCTV 300i PAL Stereo BDA Analog Capture" devid="ven_1131&dev_7134&subsys_002d11bd&rev_01">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="Pinnacle PCTV 300i PAL Stereo BDA Analog TV Tuner" checkdevice="true"/>
<filter cat="tvaudio" name="Pinnacle PCTV 300i PAL Stereo BDA Analog TV Audio" checkdevice="true"/>
<filter cat="crossbar" name="Pinnacle PCTV 300i PAL Stereo BDA Analog Xbar" checkdevice="true"/>
<filter cat="capture" name="Pinnacle PCTV 300i PAL Stereo BDA Analog Capture" checkdevice="true"/>
<filter cat="videncoder" name="Pinnacle MPEG 2 Encoder" checkdevice="false"/>
<filter cat="audencoder" name= "Pinnacle MPEG Layer-2 Audio Encoder" checkdevice="false"/>
<filter cat="mux" name="Pinnacle MPEG 2 Encoder Multiplexer" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="3" sinkfilter="audencoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"/>
</connections>
</tv>
</capturecard>
and in the filter installed on my system
i have found
1) there isn't "Pinnacle MPEG 2 Encoder Multiplexer" but ""Pinnacle MPEG 2 Multiplexer"
2) i have two "Pinnacle MPEG Layer-2 Audio Encoder" and only one is from pclempegbox.ax but mp when build graph use the other i ceck moniker in log
i have correct the first issue in capturecardefinitions and now message "unable create graph" it appears once time
how i can force mp to use other filter? changing priority with radlight filtermanager?
there are someone that have pinnale 300i and found same problem?
i have take a look in definitions.......
<capturecard commercialname="Pinnacle PCTV 300i Analogue" capturename="Pinnacle PCTV 300i PAL Stereo BDA Analog Capture" devid="ven_1131&dev_7134&subsys_002d11bd&rev_01">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="Pinnacle PCTV 300i PAL Stereo BDA Analog TV Tuner" checkdevice="true"/>
<filter cat="tvaudio" name="Pinnacle PCTV 300i PAL Stereo BDA Analog TV Audio" checkdevice="true"/>
<filter cat="crossbar" name="Pinnacle PCTV 300i PAL Stereo BDA Analog Xbar" checkdevice="true"/>
<filter cat="capture" name="Pinnacle PCTV 300i PAL Stereo BDA Analog Capture" checkdevice="true"/>
<filter cat="videncoder" name="Pinnacle MPEG 2 Encoder" checkdevice="false"/>
<filter cat="audencoder" name= "Pinnacle MPEG Layer-2 Audio Encoder" checkdevice="false"/>
<filter cat="mux" name="Pinnacle MPEG 2 Encoder Multiplexer" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="3" sinkfilter="audencoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="audencoder" sourcepin="0" sinkfilter="mux" sinkpin="1"/>
</connections>
</tv>
</capturecard>
and in the filter installed on my system
i have found
1) there isn't "Pinnacle MPEG 2 Encoder Multiplexer" but ""Pinnacle MPEG 2 Multiplexer"
2) i have two "Pinnacle MPEG Layer-2 Audio Encoder" and only one is from pclempegbox.ax but mp when build graph use the other i ceck moniker in log
i have correct the first issue in capturecardefinitions and now message "unable create graph" it appears once time
how i can force mp to use other filter? changing priority with radlight filtermanager?
there are someone that have pinnale 300i and found same problem?