Reply to thread

Message: <blockquote data-quote="powermarcel10" data-source="post: 1136008" data-attributes="member: 108759">Hi mm,Thank again for this superior explanation!Before I go to try and error some more things like you suggested, I have two more questions/points:-How accurate can MP measure the signal strength and quality of the signal? Is this accurate? In that case, nothing is wrong with the incoming signal. The first 3 tuners are having 100% for signal strenght and quality.-Tuner 1 and 3 are working fine. So I expect that this is the first tuner from card one, and the first tuner of card two. So it seems that the split cable is doing a great job without lossing any signal. Strange thing is that tuner 2, wich is still on card 1, doesn't get a good signal as I'm getting a lot of discontinuties. That problem can't be fixed with hardware as this will be splitted it internally on the card. (the same applies for tuner 3 and 4 on card 2)-When I open Manual control, with all 4 tuners enabled, I can click on a tuner wich I want to start a timeshift with. I click on tuner 2 and start a FTA SD channel. With this, I'm getting a lot of discontinuities, also when all other tuners are in Idle. When I start the same channel with tuner 1 or 3, everything is fine, and I'm getting zero discontinuities, while tuner 2 has a signal level and a signal quality of 100% like I said before.I attached a short TsWriter log file where I started an FTA SD channel with tuner 2.About your last point; I readed about that allready. My alphacrypt module i able to dycrypt 14 PID's. Actually I have no idea how to find out how many 'PID's' a channel has, but the from who I bought this tuners said that I should been able to decrypt 3 channels at the same time, and if I want to record a fourth channel, this one should be FTA.Cheers,Marcel</blockquote>

Verification