Greetings!
Since I exchanged my Mainboard and TVCard I was unable to setup a working TVServer configuration. I'm using an ASUS MA3 Mainboard with a Skystar Technisat 2 on RC 3 now. The mayor problem is, after Hibernation the TV Card is no longer working. The error says something like, Thimeshift was unable to start and the Graph could not be inicialized.
Tired of trying different drivers, and even other Mainboards and cards I thought of an easy workaround and wanted to use PowerScheduler Feature "run Command after/before Standby". I found a thread about setting it up and tried the provided Code:
if "%1" NEQ "wakeup" goto :exit
C:\Programme\Utilities\poweroff_deutsch.exe reboot -warn -warntime 5 -msg "Der Computer wird jetzt neu gestartet."
:EXIT
in a bat file. However nothing ever happens (I did check the Reinicialize Service Checkbox, and since I didn't have poweroff_deutsch.exe I simply used shutdown.exe in system32). I removed the code and put a simple "cmd" inside, however nothing happend either, so I figured, the whole thing doesn't work.
I'm playing around with Mediaportal over a year now, tested several hardware configurations but at best I could get a 77% chance that sceduled recordings really got recorded. There's usually a problem with the TV Card after a few Hibernation/Standbys where it won't work until reboot, but if you don't check daily, you'd miss quite some stuff. So I think restarting via Command line would be the best solution, and in my current condition the only one to, so I'd really really apreciate it, if someone could tell me how I can set this up.
domo arigato
Since I exchanged my Mainboard and TVCard I was unable to setup a working TVServer configuration. I'm using an ASUS MA3 Mainboard with a Skystar Technisat 2 on RC 3 now. The mayor problem is, after Hibernation the TV Card is no longer working. The error says something like, Thimeshift was unable to start and the Graph could not be inicialized.
Tired of trying different drivers, and even other Mainboards and cards I thought of an easy workaround and wanted to use PowerScheduler Feature "run Command after/before Standby". I found a thread about setting it up and tried the provided Code:
if "%1" NEQ "wakeup" goto :exit
C:\Programme\Utilities\poweroff_deutsch.exe reboot -warn -warntime 5 -msg "Der Computer wird jetzt neu gestartet."
:EXIT
in a bat file. However nothing ever happens (I did check the Reinicialize Service Checkbox, and since I didn't have poweroff_deutsch.exe I simply used shutdown.exe in system32). I removed the code and put a simple "cmd" inside, however nothing happend either, so I figured, the whole thing doesn't work.
I'm playing around with Mediaportal over a year now, tested several hardware configurations but at best I could get a 77% chance that sceduled recordings really got recorded. There's usually a problem with the TV Card after a few Hibernation/Standbys where it won't work until reboot, but if you don't check daily, you'd miss quite some stuff. So I think restarting via Command line would be the best solution, and in my current condition the only one to, so I'd really really apreciate it, if someone could tell me how I can set this up.
domo arigato