POWERSCHEDULER wakeup problem - logs (1 Viewer)

[pegial]

Hi.

I have deleted the system spec form because i have the problem in four diferent computers, with diferents program versions and diferent hardware.

The problem is the PC is not wakeup for recording in the most of program recordings. If i turn on manualy the PC, the recording is start, and if the PC is all the time ON, ALL the recordings is recorded.

I'm viewing the log, and i have encountered a suspicious things.

2007-11-11 01:32:58.593750 [Info.][MPMain]: - ShutDown Time = 31/12/9999 23:59:59
2007-11-11 01:32:58.593750 [Info.][MPMain]: - WakeUp Time = 12/11/2007 0:15:00

This one wakeup time is for WEBEPG grabber for the next day, but i have three programs to recording before this one wakeup time.

2007-11-11 01:37:59.203125 [Info.][MPMain]: - ShutDown Time = 31/12/9999 23:59:59
2007-11-11 01:37:59.203125 [Info.][MPMain]: - WakeUp Time = 11/11/2007 3:08:00

This wakeup time is correct. No made changes in TV GUIDE and the PC is POWER ON all the time.

2007-11-11 03:16:34.000000 [Info.][MPMain]: - ShutDown Time = 11/11/2007 3:16:33
2007-11-11 03:16:34.000000 [Info.][MPMain]: - WakeUp Time = 11/11/2007 7:53:00

This wakeup time is correct, the PC is wakeup but this one program is not recorded. See the attached log, please.

At this point, the next recordings are not made, because the PC is not wakeup.


In others days, the wakeup time is correct when the PC is going to HIBERNATE, but the PC is never wakeup, and nothing of all recordings are made.

Tested with last SVN. In the older version 2.2 of mediaportal, i never had this problem.

regards.

 

[SweetHome]

same problem with ShutDown Time = 31.12.9999 23:59:59 here!

//going to attach logs

 

[pegial]

Hi.

Solved!!!!.

Look at here...is the perfect solution.

https://forum.team-mediaportal.com/showpost.php?p=207289&postcount=91

 

[SweetHome]

I'm sorry - I don't think that my problem is ShutDown Time -> its WakeUpTime

I set idle time 2 minutes -> S3 -> that's ok
But on desired time to grab EPG it doesn't wake up!

I tried:
- Sleeper.exe Tool from PassMarkSoftware - no problems with that.
- Also installed MCE Standby tool as I thought this would help. -> didn't -> so uninstalled it again because it may interfere with powerscheduler.

please see especially my TV.log

2007-11-29 17:35:33.062500 [13]: PowerScheduler: User input detected at 29.11.2007 17:35:11
2007-11-29 17:35:37.937500 [8]: PowerScheduler.NextWakeupTime: inspecting handler:GenericWakeupHandler time:31.12.9999 23:59:59
2007-11-29 17:35:37.937500 [8]: PowerScheduler.NextWakeupTime: inspecting handlercheduledRecordingsHandler time:31.12.9999 23:59:59
2007-11-29 17:35:37.937500 [8]: PowerScheduler.NextWakeupTime: inspecting handlerowerSchedulerClientPlugin time:31.12.9999 23:59:59
2007-11-29 17:35:37.937500 [8]: PowerScheduler: System changed from busy state to idle state
2007-11-29 17:35:37.937500 [8]: PowerScheduler: wakeup system for EPG at time: 17:41
2007-11-29 17:35:37.937500 [8]: PowerScheduler: EPG wakeup on day Thursday
2007-11-29 17:35:37.937500 [8]: PowerScheduler: EPG last run: 29.11.2007 15:41:49
2007-11-29 17:36:37.906250 [15]: PowerScheduler: automatic wakeup is enabled: False


From where does the TVServer get the wrong "PowerScheduler.NextWakeupTime"?