TV-Server Version: none
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: default
Windows Version: Vista Home Premium SP1
CPU Type: AMD
HDD: WD 320 Gb
Memory: 2 Gb DDR2
Motherboard: ASUS M3N78-EMH HDMI
Video Card: nvidia 8200
Video Card Driver: nvidia 8200
Sound Card: Realtek HD
Sound Card AC3: -
Sound Card Driver: -
1. TV Card: Hauppauge Win-TV HRV 1100
1. TV Card Type: Hybrid
1. TV Card Driver: Hauppauge WinTV-HVR 67xxx Capture Device
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MainConcept (Haupaugge) MPEG Video Decoder
MPEG2 Audio Codec: MainConcept (Haupaugge) MPEG Audio Decoder
h.264 Video Codec:
Satelite/CableTV Provider: -
HTPC Case: -
Cooling: -
Power Supply: Enermax
Remote:
TV:
TV - HTPC Connection: DVI
I have a problem to tune the channel of the card. Card is officially supported by mediaportal and works ok with manufacturer software (WinTV) and appears to be detected correctly in Capture Cards section of configuration, but when launching Wizard from inside application it encounters 0 channels. This has to be done also by manual scanning because on the Analog city selection only 2 cities appear and don't know where to add more cities.
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: default
Windows Version: Vista Home Premium SP1
CPU Type: AMD
HDD: WD 320 Gb
Memory: 2 Gb DDR2
Motherboard: ASUS M3N78-EMH HDMI
Video Card: nvidia 8200
Video Card Driver: nvidia 8200
Sound Card: Realtek HD
Sound Card AC3: -
Sound Card Driver: -
1. TV Card: Hauppauge Win-TV HRV 1100
1. TV Card Type: Hybrid
1. TV Card Driver: Hauppauge WinTV-HVR 67xxx Capture Device
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MainConcept (Haupaugge) MPEG Video Decoder
MPEG2 Audio Codec: MainConcept (Haupaugge) MPEG Audio Decoder
h.264 Video Codec:
Satelite/CableTV Provider: -
HTPC Case: -
Cooling: -
Power Supply: Enermax
Remote:
TV:
TV - HTPC Connection: DVI
I have a problem to tune the channel of the card. Card is officially supported by mediaportal and works ok with manufacturer software (WinTV) and appears to be detected correctly in Capture Cards section of configuration, but when launching Wizard from inside application it encounters 0 channels. This has to be done also by manual scanning because on the Analog city selection only 2 cities appear and don't know where to add more cities.