[confirm] Radio Guide is blank if accessed from "All Channels" context (1 Viewer)

[markius]

MediaPortal Version: 1.1.0 RC1
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 Ultimate 32-bit
CPU Type: AMD Phenom 9350e QC @ 2.0GHz
HDD: 2 x 1TB WD10EADS-00L5B1 (RAID 1)
Memory: OCZ 4GB (2x2GB) DDR2 1066MHz/PC2-8500 Gold Memory
Motherboard: MSI MS-7411 (Live Diva 5.1)
Video Card: ATI Radeon HD 3200
Video Card Driver: Catalyst 9.6
Sound Card: D2Audio / Maui 5.1
Sound Card AC3: no AC3
Sound Card Driver: 6.0.1.0
1. TV Card: Pinnacle PCTV 7010ix
1. TV Card Type: 2xDVB-T/Alog, 2xDVB-S
1. TV Card Driver: 6.0.3.9
2. TV Card: Terratec 2400i DT
2. TV Card Type: 2xDVB-T
2. TV Card Driver: 1.1.0.283
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Microsoft DTV
MPEG2 Audio Codec: MPA
h.264 Video Codec: Microsoft DTV
Satelite/CableTV Provider: Astra 28.2°E & Eurobird 28.5°E
HTPC Case: Antec Fusion Remote Black
Cooling: Stock
Power Supply: Corsair 400W CX PSU
Remote: iMON PAD
TV: Samsung 40in LCD LE40A686
TV - HTPC Connection: HDMI

Steps to reproduce
Go to Radio
Go to Radio Guide
(Blank guide shown)
Go back
Go to ".." (up one level) - "All Channels" should be visible
Go to Radio Guide
(Populated guide shown)

This problem appears to be limited to the "All Channels" context. When invoking the Radio Guide from the "root group" or from within a user-defined group the guide displayes as expected.

The behaviour of the TV Guide is as expected - this issue affects the radio guide only.

Logs attached. Reproduced with StreamedMP and Blue3Wide skins

 

[ronilse]

Re: Radio Guide is blank if accessed from Radio Channels list

Hi,
Not able to reproduce this, here guide shows in both situation as described above (tested with B3W without other plugins on win 7 home & latest MP (from svn))..
Maybe someone else have more luck

Regards
Roy

 

[markius]

Re: Radio Guide is blank if accessed from Radio Channels list

Do you have any Radio groups set up?

My system has 199 radio channels with a mixture of DVB-S, DVB-T and DVB-S&T (combined) channels.
I have no groups configured.
All scrambled/encrypted channels are unticked in Setup TV / Radio Channels.

Is there any more information that I can provide to help?

 

[ronilse]

Re: Radio Guide is blank if accessed from Radio Channels list

Hi,
I have provider group after dvb-t scan, so that means yes to group (don't have time now to fully test combined channels, maybe someone else can & maybe thats the triggering part).

Regards
Roy

 

[markius]

Re: Radio Guide is blank if accessed from Radio Channels list

OK, so I've done a bit more testing to help pin this down...

The radio guide is only blank if it is accessed from the context of the "All Channels" group.
If you access the guide from the context of a user-created group, the guide correctly shows only the channels from the selected group.
If you access the guide from the "root" group (IE where the list of groups is shown), the guide correctly shows all channels.

Configuration info from Mediaportal Setup / Plugins / Radio:
Channel Groups / Show the "All channels group": TRUE*
Chennel Groups / Remember last group: TRUE
Channel Groups / Group to show in root menu: "(none)"

* There is also a small quality issue in the MediaPortal Setup UI: The label.text should really read [Show the "All Channels" group]

 

[johnzered]

I cannot confirm this either...

//johnzered

 

[markius]

OK so where do we go from here?

 

[rekenaar]

Maybe just verify with B3W skin as well. Does not sound like a skin issue, but you never know.

 

[ronilse]

OK so where do we go from here?

Hi,
Just wait & see if someone else shows up & can confirm it, if none i'll setup a dvb-t / dvb-s setup & test that when i have time. It can be triggered with something there.
One thing was this a clean install(no upgrade, no back ported db's etc) & does it happen without any plugins(i don't have many installed, for the moment only tv-series & not even a extra skin installed, but thats just now & will change when i have some days of to configure )

Regards
Roy

 

[markius]

This was a clean install. The only plug-ins I have installed are those included with StreamedMP.
I'll spend some more time tracking this one down but it will have to wait for a week or so - my test MP box is out of action at the moment.