RC2, RC3, RC4 : DVB-T channel data Corrupt beetween 2 groups (1 Viewer)

[mjsystem]

Area: Media Portal Program
MP Version: RC4
Windows Version: Windows XP pro SP2
CPU Type: P4 HT 2,6GHz
Memory: 1Go
Motherboard Chipset: Asus P4P800 (i865)
Video Card: Radeon 9550
Video Card Driver: 8.241.0.0
Video Card Resolution: 1024x768
Video Render Type: VMR9
Video Codec Type & Version: MPV codec
Audio Codec Type & Version: MPA cedec
TV Card: Pinnacle MediaCenter 200i and Hauppauge Nova-T PCI
TV Card Driver: Pinnacle 1.3.2 (03/12/2004) Hauppauge 2.114.24090 (11/03/2006)
Optional Log: MediaPortal.log


Synopsis:

After scan of channels, 28 channels have detected on each card. The Hauppauge channel are renamed in H_XXXX and Pinnacle channel P_XXXX. For exemple, for the french channel TF1 :

Channel for Hauppauge H_TF1:

Channel for Pinnacle P_tf1:

Groups:

Hauppauge Group (H_XXXX) :

Pinnacle Group (P_XXXX) :

Now, i start MP and myTV:
MP start the channel H_TF1 of Hauppauge group ==> OK
I change the groupe to Pinnacle
MP start the channel P_tf1 of Pinnacle group ==> OK
I change the channel to P_france2
MP start the channel P_france2 ==> OK
I change to Hauppage group
MP start the channel H_TF1 but no signal is detected ==> NOK
I stop Mediaportal

I launch Mediaportal setup and check the channel H_TF1 parameters:

The carrier frequency of H_TF1 have changed (the DVB-T data of P_tf1 are copied to H_TF1, i think)

If you want you can download the channel list here

WebEPG is actived.

Thanks for your help.

 

[mjsystem]

??? Strange Bug ???

I tried to set stupid "carrier frequency" (562300) to the channel P_tf1 and to reproduice this bug. All it's OK; except that the channel P_tf1 don't work.

But the carrier frequency of H_TF1 don't change...

I tried to set the right "carrier frequency" (562167) to the channel P_tf1 ==> When I change group the "carrier frequency" of H_TF1 was changed.

If i try this scheme with another channel, i have the same problem...

It's strange... :shock: :?: