TV-Server Version: 0.9.3.20432
MediaPortal Version: 0.9.3.20432
MediaPortal Skin: Monochrome
Windows Version: Vista x86 SP1
CPU Type: AMD 4450e
HDD: Samsung Spinpoint 500Gb
Memory: 2×1Gb DDR2-800
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: ATI Radeon HD3200 (Integrated)
Video Card Driver:
Sound Card:
Sound Card AC3: Mobo opt.out
Sound Card Driver:
1. TV Card: Hauppauge WinTV Nova-S2
1. TV Card Type: DVB-S2
1. TV Card Driver:
2. TV Card: Hauppauge WinTV Nova-S2
2. TV Card Type: DVB-S2
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: Astra 28E
HTPC Case: EV Piano Black
Cooling:
Power Supply:
Remote: Hauppauge supplied
TV:
TV - HTPC Connection: VGA
I've got a weird problem which used to happen in the RC1 build I was using periodically, but seems to happen even moreso on RC3.
Basically, I will have scheduled recording, but when I look the next day, the recording isn't listed, like it never happened, and I cannot watch TV. MP just hangs when trying to connect (no error about timeshifting etc). The TVService won't stop, I have to end-task it. Once I restart it, I can then watch live TV again, but my recording is still non-existent.
Looking in the logs (attached) I'm not sure what's going on. The recording in question on this occasion was Spooks, on the 28th, BBC1, 21:00. TVserver_tv.Log shows this:
2008-10-28 20:55:08.415400 [15]: card: Tune 1 to BBC 1 East (W)
which is correct, but then nothing else until the epg import a few hrs later (so the tv server didn't crash or hang at the record point I guess...)
The TSWriter is even less helpful, the last few entries being:
28-10-2008 19:11:13.126 epg: reset
28-10-2008 19:11:13.127 epg:ResetEPG()
28-10-2008 19:11:13.127 mhw reset
28-10-2008 19:11:13.132 del m_pVideoAnalyzer
28-10-2008 19:11:13.132 analyzer: reset
28-10-2008 19:11:13.133 del m_pPmtGrabber
28-10-2008 19:11:13.133 del m_pRecorder
28-10-2008 19:11:13.133 del m_pTimeShifting
28-10-2008 19:11:13.133 del m_pTeletextGrabber
28-10-2008 19:11:13.134 del m_pCaGrabber
28-10-2008 19:11:13.134 del done...
28-10-2008 19:11:13.136 CMpTsFilter:
ause()
28-10-2008 19:11:13.137 CMpTsFilter:
top()
Then nothing - so it didn't do *anything* at the point my recording should have started? (note, we had guests round and were playing music in MP, TV wasn't on)
The TVServer Error log is empty.
Any pointers gratefully received - I'd say a good 50% of recordings result in this behaviour and the wife is starting to get annoyed
MediaPortal Version: 0.9.3.20432
MediaPortal Skin: Monochrome
Windows Version: Vista x86 SP1
CPU Type: AMD 4450e
HDD: Samsung Spinpoint 500Gb
Memory: 2×1Gb DDR2-800
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: ATI Radeon HD3200 (Integrated)
Video Card Driver:
Sound Card:
Sound Card AC3: Mobo opt.out
Sound Card Driver:
1. TV Card: Hauppauge WinTV Nova-S2
1. TV Card Type: DVB-S2
1. TV Card Driver:
2. TV Card: Hauppauge WinTV Nova-S2
2. TV Card Type: DVB-S2
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: Astra 28E
HTPC Case: EV Piano Black
Cooling:
Power Supply:
Remote: Hauppauge supplied
TV:
TV - HTPC Connection: VGA
I've got a weird problem which used to happen in the RC1 build I was using periodically, but seems to happen even moreso on RC3.
Basically, I will have scheduled recording, but when I look the next day, the recording isn't listed, like it never happened, and I cannot watch TV. MP just hangs when trying to connect (no error about timeshifting etc). The TVService won't stop, I have to end-task it. Once I restart it, I can then watch live TV again, but my recording is still non-existent.
Looking in the logs (attached) I'm not sure what's going on. The recording in question on this occasion was Spooks, on the 28th, BBC1, 21:00. TVserver_tv.Log shows this:
2008-10-28 20:55:08.415400 [15]: card: Tune 1 to BBC 1 East (W)
which is correct, but then nothing else until the epg import a few hrs later (so the tv server didn't crash or hang at the record point I guess...)
The TSWriter is even less helpful, the last few entries being:
28-10-2008 19:11:13.126 epg: reset
28-10-2008 19:11:13.127 epg:ResetEPG()
28-10-2008 19:11:13.127 mhw reset
28-10-2008 19:11:13.132 del m_pVideoAnalyzer
28-10-2008 19:11:13.132 analyzer: reset
28-10-2008 19:11:13.133 del m_pPmtGrabber
28-10-2008 19:11:13.133 del m_pRecorder
28-10-2008 19:11:13.133 del m_pTimeShifting
28-10-2008 19:11:13.133 del m_pTeletextGrabber
28-10-2008 19:11:13.134 del m_pCaGrabber
28-10-2008 19:11:13.134 del done...
28-10-2008 19:11:13.136 CMpTsFilter:
28-10-2008 19:11:13.137 CMpTsFilter:
Then nothing - so it didn't do *anything* at the point my recording should have started? (note, we had guests round and were playing music in MP, TV wasn't on)
The TVServer Error log is empty.
Any pointers gratefully received - I'd say a good 50% of recordings result in this behaviour and the wife is starting to get annoyed
United Kingdom