- January 7, 2008
- 464
- 42
- Home Country
- Netherlands
TV-Server Version: TV Server 1 (1.0)
MediaPortal Version: Mediaportal 1 (1.0)
MediaPortal Skin: Xface 1.7 for MP1.0 final
Windows Version: Windows Vista 32bit SP1
CPU Type: Intel Core Duo E6600, @2.7Ghz
HDD: Samsung Spinpoint SATA2 500Gb
Memory: 4x1Gb DDR2 800Mhz
Motherboard: Abit fatal1ty I90HD
Video Card: Gainward 4650 1024Mb DDR2
Video Card Driver: CCC 8.12
Sound Card: Realtek HD Audio (on Board)
Sound Card AC3: Realtek HD Audio (on Board)
Sound Card Driver: 1.91
1. TV Card: Digital everywhere FloppyDTV-C/CI
1. TV Card Type: DVB-C
1. TV Card Driver: 4.8.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink Video/SP decoder(PDVD8)
MPEG2 Audio Codec: AC3Filter (SPDIF OUT)
h.264 Video Codec: Cyberlink H264/AVC decoder (PDVD8)
Satelite/CableTV Provider: Ziggo (8888, former Multikabel)
HTPC Case: Antec Fusion 430 silver
Cooling: Antec tricooler/Scythe Mini Ninja
Power Supply: Antec Fusion 430Watt
Remote: Microsoft MCE RC6
TV: JVC LCD LT32S60
TV - HTPC Connection: HDMI @720P50Hz
This is a very consistent bug in 1.0 Final (SVN not installed YET), and I remember I had it also in the RC issues.. Till now I blamed allways it was my system itself, but it seems so consistent with mediaportal, I decided today to report it as a bug.
After reboot of my system and start Mediaportal and then try to watch TV I allways get the message Timeshift cannot start because there is no free TV Card.. However I have not running any other client at all (I have only one TV card). Then I close Mediaportal, restart TVService, start mediaportal again, and then everything works fine.
Now I just restart the TV server before I start Mediaportal to watch TV, but this should not be this way, tight?
This time I started the mediaportal debug mode as adminisrator, and then it works, I made the following logs
attached a log right after computer reboot without restarting the TVservice first, and also a log that shows what is going on when starting mediaportal AFTER restarting TVservice when all is OK.
Advice is, as allways appreciated.
Thanks
Lots
MediaPortal Version: Mediaportal 1 (1.0)
MediaPortal Skin: Xface 1.7 for MP1.0 final
Windows Version: Windows Vista 32bit SP1
CPU Type: Intel Core Duo E6600, @2.7Ghz
HDD: Samsung Spinpoint SATA2 500Gb
Memory: 4x1Gb DDR2 800Mhz
Motherboard: Abit fatal1ty I90HD
Video Card: Gainward 4650 1024Mb DDR2
Video Card Driver: CCC 8.12
Sound Card: Realtek HD Audio (on Board)
Sound Card AC3: Realtek HD Audio (on Board)
Sound Card Driver: 1.91
1. TV Card: Digital everywhere FloppyDTV-C/CI
1. TV Card Type: DVB-C
1. TV Card Driver: 4.8.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink Video/SP decoder(PDVD8)
MPEG2 Audio Codec: AC3Filter (SPDIF OUT)
h.264 Video Codec: Cyberlink H264/AVC decoder (PDVD8)
Satelite/CableTV Provider: Ziggo (8888, former Multikabel)
HTPC Case: Antec Fusion 430 silver
Cooling: Antec tricooler/Scythe Mini Ninja
Power Supply: Antec Fusion 430Watt
Remote: Microsoft MCE RC6
TV: JVC LCD LT32S60
TV - HTPC Connection: HDMI @720P50Hz
This is a very consistent bug in 1.0 Final (SVN not installed YET), and I remember I had it also in the RC issues.. Till now I blamed allways it was my system itself, but it seems so consistent with mediaportal, I decided today to report it as a bug.
After reboot of my system and start Mediaportal and then try to watch TV I allways get the message Timeshift cannot start because there is no free TV Card.. However I have not running any other client at all (I have only one TV card). Then I close Mediaportal, restart TVService, start mediaportal again, and then everything works fine.
Now I just restart the TV server before I start Mediaportal to watch TV, but this should not be this way, tight?
This time I started the mediaportal debug mode as adminisrator, and then it works, I made the following logs
attached a log right after computer reboot without restarting the TVservice first, and also a log that shows what is going on when starting mediaportal AFTER restarting TVservice when all is OK.
Advice is, as allways appreciated.
Thanks
Lots