Codecs SAF v6 (based on LAVF) (10 Viewers)

[hoborg]

Re: AW: Re: SAF v6.00 (based on LAVF)

Not until passthrough und AAC reencode is working ;-)

Passthrough is working (?any problem i am missing?) and reencode can be done by ffdshow Audio Processor filter (add it in to MEPo postprocessing).
Or as tourettes mentioned, use MePo audio renderer.

 

[D3ltoroxp]

AW: Re: SAF v6.00 (based on LAVF)

Good news, LAVF audio decoder now support DVD playback. Time to say FFDshow audio decoder good bay?

Ha its very funny. Now i would ask you why lafaudio does not work with dvd ;-)

but i have a other problem.i have an avr with hdmi in and out.so i connect my htpc with hdmi on my avr and the avr with hdmi on my tv. But when i will play dts i have no sound. My display from the avr jumps from pcm to decoder off and back,all the time.dolby and co. Works fine. When i test it with ps3 and 360 all works finedts dts hd master all works perfectly. In ffdshow i set all to passthrough.

 

[hoborg]

Re: AW: Re: SAF v6.00 (based on LAVF)

Ha its very funny. Now i would ask you why lafaudio does not work with dvd ;-)

Becouse MS DVD navigator output audio as PES streams instead of demuxed audio.

but i have a other problem.i have an avr with hdmi in and out.so i connect my htpc with hdmi on my avr and the avr with hdmi on my tv. But when i will play dts i have no sound. My display from the avr jumps from pcm to decoder off and back,all the time.dolby and co. Works fine. When i test it with ps3 and 360 all works finedts dts hd master all works perfectly. In ffdshow i set all to passthrough.

You need to use LAVF audio decoder for DTS-HD, not FFDshow.
There is some DTS settings (Use DTS-HD framing for all DTS types) in LAVF audio decoder, certain recievers have issues until it is enabled. So try it turning on. Another recievers have issues when this option is enabled. Walking in circles...

@ALL:
Here is new SAF6 test with LAVF .29 and without FFDshow audio decoder.

Seems to be working just fine

 

[D3ltoroxp]

AW: SAF v6.00 (based on LAVF)

Ok but normaly dts make them same problem how dts hd. But i will try the new saf for testing. And now will i give you a very big thx for your hard work to keep your saf package up to date and for the fone support.

 

[Holzi]

AW: SAF v6.00 (based on LAVF)

Hello!
Today I downloaded the LAV Filters 32bit .zip package and registered the filters and as in the origin thread described I put the "dtsdecoderdll.dll" from the TMT3 in the directory where I unzipped the LAV Filters to have DTS-HD passthrough. But if i go to the LAV Audio config window the DTS-HD passthrough is grayed out and i can't enable it.
Am I doing something wrong? Thanks in advance!

PS: My "dtsdecoderdll.dll" out of TMT3 is from April 2010. Could it be that this is too old?

 

[hoborg]

Re: AW: SAF v6.00 (based on LAVF)

Hello!
Today I downloaded the LAV Filters 32bit .zip package and registered the filters and as in the origin thread described I put the "dtsdecoderdll.dll" from the TMT3 in the directory where I unzipped the LAV Filters to have DTS-HD passthrough. But if i go to the LAV Audio config window the DTS-HD passthrough is grayed out and i can't enable it.
Am I doing something wrong? Thanks in advance!

PS: My "dtsdecoderdll.dll" out of TMT3 is from April 2010. Could it be that this is too old?

There is no need to do anything like you described. LAVF filters is already installedby latest SAF6 and DTS-HD working in unlocked SAF

 

[tourettes]

Re: AW: SAF v6.00 (based on LAVF)

Hello!
Today I downloaded the LAV Filters 32bit .zip package and registered the filters and as in the origin thread described I put the "dtsdecoderdll.dll" from the TMT3 in the directory where I unzipped the LAV Filters to have DTS-HD passthrough. But if i go to the LAV Audio config window the DTS-HD passthrough is grayed out and i can't enable it.
Am I doing something wrong? Thanks in advance!

PS: My "dtsdecoderdll.dll" out of TMT3 is from April 2010. Could it be that this is too old?

There is no need to do anything like you described. LAVF filters is already installedby latest SAF6 and DTS-HD working in unlocked SAF

I really hope that there is no copyright violations done. Distributing the Arcsoft's DLL would be such.

 

[schumach]

Re: SAF v6.00 (based on LAVF)

hoborg,

I have loaded the latest SAF6.0 and everything seems to be working fine. I checked the graphs and all audio is going through LAVF audio decoder.

I do have a question. How do you get to the LAVF settings?

Thank you,

Greg

 

[hoborg]

Re: SAF v6.00 (based on LAVF)

hoborg,

I have loaded the latest SAF6.0 and everything seems to be working fine. I checked the graphs and all audio is going through LAVF audio decoder.

I do have a question. How do you get to the LAVF settings?

Thank you,

Greg

Open the video in Graphstudio and double click on LAVF audio decoder / splitter.

 

[D3ltoroxp]

AW: SAF v6.00 (based on LAVF)

So, thanks hoborg, my dts problem is gone. But i have now another one. When i will watch Iron Man Blu Ray, he do nothing he jumps back in MePo home screen. The same with mkv file was made with makemkv from the iron man blu ray. I think the problem is the first audio line, its dts-hd master (loosless) All other dts sounds working great. But this one movie will not play. Is that a problem from lav or from MePo but with ffdshow he works fine.