Scheduled recording, start viewing before finished? (1 Viewer)

[EmuMannen]

I just switched to Mediaportal (my first installation) from Dreambox (and several other solutions before that, e.g. VDR). My Mediaportal installation is working great (just took some time to find all information needed to get suspend, Power Scheduler, remote wakeup etc. to work) but I still have one problem that I haven’t been able to solve.

One of the best and by me most used functions in VDR or Dreambox is the ability to schedule recordings and start looking at them (from the beginning) while still recording. I guess that it should be possible with Mediaportal but the current recording is not listed under “Recorded TV” until the current scheduled recording is finished. This is pretty annoying since there is no way (I have found) to start looking at a recording until it is finished!

I have found at least one other user that had the same problem (by searching this forum) so I know that I am not alone. Anyone knows the reason for this behavior and if there is a “fix”?

Thanks in advance…


TV-Server Version: N/A
MediaPortal Version: 0.2.2.0
MediaPortal Skin: Simplify 16:9
Windows Version: XP SP2
CPU Type: AMD X2 4600+
HDD: Seagate 200 GB 7200
Memory: 1 GB
Motherboard: abit NF-M2 nView
Motherboard Chipset: NForce 430 / GeForce 6150
Motherboard Bios:
Video Card: Onboard
Video Card Driver: nVidia ForceWare 101.02
Sound Card: Onboard
Sound Card AC3: Onboard
Sound Card Driver: WDM R165
1. TV Card: Hauppauge PVR-150MCE
1. TV Card Type: Analog/HW
1. TV Card Driver: 2.0.48.24227
MPEG2 Video Codec: PureVideo
MPEG2 Audio Codec: MPA
Satelite/CableTV Provider: ComHem
HTPC Case: CoolerMaster ATC-620-BX1
Cooling: Stock
Power Supply: Fortrons 350PNF
Remote: Microsoft MCE Remote
TV: N/A
TV - HTPC Connection: DVI

 

[FlipGer]

Hi,

you are searching at the wrong place.

Just go into the "Scheduled" section and hit OK on the entry of the current running recording. You will be asked, if you want to see it from the beginning.

Or just start My TV. Switch to the channel, where your recording runs and skip back (or rewind) to the beginning.

HTH,
Flip.

 

[Marcusb]

if you select the program in the TV guide you will also be asked if you want to view from live point or the start of the recording.

 

[EmuMannen]

Thanks for your swift replies, I will try that ASAP...

 

[EmuMannen]

Just go into the "Scheduled" section and hit OK on the entry of the current running recording. You will be asked, if you want to see it from the beginning.

That doesn't work, this is a "repeat timer", I am only taken "down" in a folder like view of upcoming scheduled recordings if I hit OK on the entry (and nothing in the context menu).

Or just start My TV. Switch to the channel, where your recording runs and skip back (or rewind) to the beginning.

This works, I am able to enter the channel and skip back to the beginning (and finally start watching from the beginning while still recording).

 

[EmuMannen]

if you select the program in the TV guide you will also be asked if you want to view from live point or the start of the recording.

No, I am not getting that question (I am running 0.2.2.0, should I get that question or is it in a later CVS version?)...

 

[FlipGer]

Just go into the "Scheduled" section and hit OK on the entry of the current running recording. You will be asked, if you want to see it from the beginning.

That doesn't work, this is a "repeat timer", I am only taken "down" in a folder like view of upcoming scheduled recordings if I hit OK on the entry (and nothing in the context menu).

Interesting. I haven't used the "repeat timer" that much. And in the list of upcoming scheduled recordings is the current recording not shown and / or marked with a red dot?

If so this should be changed. For single recordings it works like I described above.

Thanks for reporting back.

Flip.

 

[Marcusb]

if you select the program in the TV guide you will also be asked if you want to view from live point or the start of the recording.

No, I am not getting that question (I am running 0.2.2.0, should I get that question or is it in a later CVS version?)...

I thought it was in the stable version, but I guess not. It's such a long time since I used it I don't remember...

 

[EmuMannen]

I thought it was in the stable version, but I guess not. It's such a long time since I used it I don't remember...

So would I be better of running the latest CVS version?