Schedules Direct US/Canadian/Mexico EPG Plugin (Updated August 2010) (1 Viewer)

[jjemil808]

@geoffstewart @mm1352000

Thank you very much for the help. mm1352000, you hit the nail on the head. I hadn't enabled show episode info in MediaPortal Configuration -> TV/Radio -> TV -> General Settings tab.

I'm using the Titan and aMPed skins. Turns out, enabling show episode info isn't all that great. It's showing long ugly cryptic EPxxxxxx.xxxxx numbers for all tv shows all over the EPG, except for tv shows I'm recording where they correctly show as season#.episode#

I wish there was a way to customize to only show season# episode# for shows I'm recording and not show that long cryptic EPxxxxx number all over the EPG for all other tv shows.

 

[jjemil808]

SchedulesDirect EPG plugin has the best and most complete EPG information. Thank you to the developpers for the great work.

As mentioned in my previous post, my main issue is that if I enable show episode info Number+Title :
1. The SD EPG plugin will clutter the EPG with long and unnecessary EPxxxxxxxx.xxxxx for TV series not scheduled for recording.
2. For movies and other shows, it unnecessarily adds empty fields (-.-.-.--) to the name.

Now, I don't know if there's a way to fix the episode info display issue by editing an xml file, or is it hardcoded in the SD EPG plugin?

xmltv EPG plugin doesn't have complete EPG info like SD EPG plugin, but in contrast with xmltv enabling show episode info Number+Title:
1. Doesn't add the useless EPxxxxxxxx.xxxxx for TV shows not scheduled for recording. It shows a cleaner and more elegant S##E##
2. For movies and other shows, in a cleaner way, it doesn't add an empty (-.-.-.--). Nothing is added to the title.

 

[Paul Jackson]

I'm new to media portal because Microsoft is dropping support and I'm sure once I get this set up I won't look back with regret. I'm having trouble setting up schedules direct. I did create a trial account and configured to have the correct line up on my account. It is throwing an exception when trying to test the connection to the web service. I added a configuration to allow the TV service through the firewall and also tested temporarily shutting off the firewall and got the same results.

The IP address is the localhost so I assume there must be something I have missed. Any information would be helpful, thanks in advance.

[2015-05-15 13:04:06,993] [EPG    ] [DVB EPG timer] [INFO ] - Grab for card:#7 transponder #1/1 channel: CozyTV-D1 (WMFP)
[2015-05-15 13:04:06,993] [EPG    ] [DVB EPG timer] [INFO ] - EpgCard: grab epg on card: #7 transponder: #0 ch:CozyTV-D1 (WMFP)
[2015-05-15 13:04:07,009] [Log    ] [DVB EPG timer] [DEBUG] - RemoteControl: RegisterChannel first called in Domain TVService.exe for thread DVB EPG timer with id 5
[2015-05-15 13:04:07,040] [Log    ] [DVB EPG timer] [DEBUG] - CardReservationBase.RequestCardTuneReservation: placed reservation with id=1, tuningdetails=ATSC:tv:Terrestrial CozyTV-D1 (WMFP) Freq:-1 ONID:16 TSID:1375 SID:1 PMT:0x0 FTA:True LCN:18 phys:18 maj:62 min:1 mod:Mod8Vsb
[2015-05-15 13:04:07,056] [Log    ] [DVB EPG timer] [INFO ] - card: Tune on card 7 to subchannel CozyTV-D1 (WMFP)
[2015-05-15 13:04:07,056] [Log    ] [DVB EPG timer] [DEBUG] - card: user: epg:7:-1 tune ATSC:tv:Terrestrial CozyTV-D1 (WMFP) Freq:-1 ONID:16 TSID:1375 SID:1 PMT:0x0 FTA:True LCN:18 phys:18 maj:62 min:1 mod:Mod8Vsb
[2015-05-15 13:04:07,071] [Log    ] [DVB EPG timer] [INFO ] - atsc:Tune:ATSC:tv:Terrestrial CozyTV-D1 (WMFP) Freq:-1 ONID:16 TSID:1375 SID:1 PMT:0x0 FTA:True LCN:18 phys:18 maj:62 min:1 mod:Mod8Vsb
[2015-05-15 13:04:07,071] [Log    ] [DVB EPG timer] [INFO ] - atsc:BuildGraph
[2015-05-15 13:04:07,087] [Log    ] [DVB EPG timer] [INFO ] - dvb:AddNetworkProviderFilter
[2015-05-15 13:04:07,103] [Log    ] [DVB EPG timer] [INFO ] - dvb:AddNetworkProviderFilter
[2015-05-15 13:04:07,103] [Log    ] [DVB EPG timer] [INFO ] - dvb:Add Generic Network Provider
[2015-05-15 13:04:07,103] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Add Mediaportal TsWriter filter
[2015-05-15 13:04:07,227] [Log    ] [DVB EPG timer] [INFO ] - atsc:CreateTuningSpace()
[2015-05-15 13:04:07,274] [Log    ] [DVB EPG timer] [INFO ] - atsc:found correct tuningspace MediaPortal ATSC TuningSpace
[2015-05-15 13:04:07,290] [Log    ] [DVB EPG timer] [INFO ] - dvb:Add MPEG2 Demultiplexer filter
[2015-05-15 13:04:07,321] [Log    ] [DVB EPG timer] [INFO ] - dvb:AddAndConnectBDABoardFilters
[2015-05-15 13:04:07,337] [Log    ] [DVB EPG timer] [INFO ] - dvb: find bda tuner
[2015-05-15 13:04:07,571] [Log    ] [DVB EPG timer] [INFO ] - dvb:  using [Tuner]: Hauppauge WinTV-7164 BDA ATSC/QAM Tuner
[2015-05-15 13:04:07,571] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Render [Network provider]->[Tuner] OK
[2015-05-15 13:04:07,571] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Setting lastFilter to Tuner filter
[2015-05-15 13:04:07,586] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Find BDA receiver
[2015-05-15 13:04:07,586] [Log    ] [DVB EPG timer] [INFO ] - dvb:  match Capture by Tuner device path
[2015-05-15 13:04:07,602] [Log    ] [DVB EPG timer] [INFO ] - dvb:  -Hauppauge WinTV-7164 BDA Digital Capture
[2015-05-15 13:04:07,602] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Render [Tuner]->[Capture] AOK
[2015-05-15 13:04:07,602] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Setting lastFilter to Capture device
[2015-05-15 13:04:07,633] [Log    ] [DVB EPG timer] [INFO ] - dvb:  WinTv CI module not detected.
[2015-05-15 13:04:07,649] [Log    ] [DVB EPG timer] [INFO ] - dvb:add Inf Tee filter
[2015-05-15 13:04:07,664] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Render ...->[inftee]
[2015-05-15 13:04:07,664] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Setting lastFilter to Inf Tee
[2015-05-15 13:04:07,680] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Render [inftee]->[demux]
[2015-05-15 13:04:07,680] [Log    ] [DVB EPG timer] [INFO ] - dvb:  AddTransportStreamFiltersToGraph
[2015-05-15 13:04:07,695] [Log    ] [DVB EPG timer] [INFO ] -     add BDA MPEG2 Transport Information Filter filter
[2015-05-15 13:04:07,711] [Log    ] [DVB EPG timer] [INFO ] -     pinTif:name:IB Input [3/0] Direction:Input Connected:False
[2015-05-15 13:04:07,711] [Log    ] [DVB EPG timer] [INFO ] -     Connect tif and mpeg2 sections and tables
[2015-05-15 13:04:07,711] [Log    ] [DVB EPG timer] [INFO ] - dvb:try tif:name:001 [5/0] Direction:Output Connected:False
[2015-05-15 13:04:07,742] [Log    ] [7        ] [DEBUG] - PS: GetCurrentState - Reset "Finished" and triggered StandbyWakeupThread
[2015-05-15 13:04:07,742] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: StandbyWakeupThread triggered by event
[2015-05-15 13:04:07,742] [Log    ] [DVB EPG timer] [INFO ] -     tif connected
[2015-05-15 13:04:07,758] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: LoadSettings()
[2015-05-15 13:04:07,758] [Log    ] [DVB EPG timer] [INFO ] - dvb:  Render ..->[TsWriter]
[2015-05-15 13:04:07,758] [Log    ] [DVB EPG timer] [INFO ] - dvb: Checking for hardware specific extensions
[2015-05-15 13:04:07,773] [Log    ] [DVB EPG timer] [INFO ] - CAM is Default model
[2015-05-15 13:04:07,773] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: SetWakeupTimer()
[2015-05-15 13:04:07,789] [Log    ] [DVB EPG timer] [INFO ] - Check for ViXS ATSC QAM card
[2015-05-15 13:04:07,789] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Inspecting WebEPGWakeupHandler: 5/16/2015 12:00:00 AM
[2015-05-15 13:04:07,789] [Log    ] [DVB EPG timer] [DEBUG] - ViXS ATSC: card NOT found!
[2015-05-15 13:04:07,789] [Log    ] [DVB EPG timer] [INFO ] - Check for Generic ATSC QAM card
[2015-05-15 13:04:07,789] [Log    ] [DVB EPG timer] [DEBUG] - GenericATSC: QAM card NOT found!
[2015-05-15 13:04:07,805] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Set wakeup timer to wakeup system at 5/15/2015 11:59:00 PM
[2015-05-15 13:04:07,805] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: CheckForStandby()
[2015-05-15 13:04:07,805] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: SetStandbyMode(StandbyAllowed)
[2015-05-15 13:04:07,805] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: System is idle and may go to standby
[2015-05-15 13:04:07,805] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Active standby is disabled - standby is handled by Windows
[2015-05-15 13:04:07,820] [Log    ] [7        ] [DEBUG] - PS: GetCurrentState - StandbyWakeupThread signaled "Finished"
[2015-05-15 13:04:07,883] [Log    ] [DVB EPG timer] [INFO ] - dvb: GetTunerSignalStatistics()
[2015-05-15 13:04:07,898] [Log    ] [DVB EPG timer] [INFO ] - atsc:using new channel tuning settings
[2015-05-15 13:04:07,914] [Log    ] [DVB EPG timer] [INFO ] - dvb:confused:ubmiting tunerequest Channel:CozyTV-D1 (WMFP) subChannel:-1
[2015-05-15 13:04:07,914] [Log    ] [DVB EPG timer] [INFO ] - dvb:Getting new subchannel
[2015-05-15 13:04:07,914] [Log    ] [DVB EPG timer] [INFO ] - dvb:GetNewSubChannel:0 #0
[2015-05-15 13:04:07,929] [Log    ] [DVB EPG timer] [INFO ] - TvDvbChannel ctor new subchIndex:0
[2015-05-15 13:04:07,929] [Log    ] [DVB EPG timer] [INFO ] - card: AddTuneEvent card: 7 / subch: 0
[2015-05-15 13:04:07,945] [Log    ] [DVB EPG timer] [INFO ] - dvb:confused:ubmit tunerequest size:1 new:0
[2015-05-15 13:04:07,945] [Log    ] [DVB EPG timer] [INFO ] - subch:0 OnBeforeTune
[2015-05-15 13:04:07,945] [Log    ] [DVB EPG timer] [INFO ] - dvb:confused:ubmit tunerequest calling put_TuneRequest
[2015-05-15 13:04:07,961] [Log    ] [DVB EPG timer] [INFO ] - dvb:confused:ubmit tunerequest done calling put_TuneRequest
[2015-05-15 13:04:07,961] [Log    ] [DVB EPG timer] [INFO ] - subch:0 OnAfterTune
[2015-05-15 13:04:07,961] [Log    ] [DVB EPG timer] [INFO ] - RunGraph
[2015-05-15 13:04:07,976] [Log    ] [DVB EPG timer] [INFO ] - subch:0 OnGraphStart
[2015-05-15 13:04:07,976] [Log    ] [DVB EPG timer] [INFO ] - dvb:  RunGraph
[2015-05-15 13:04:08,756] [Log    ] [DVB EPG timer] [INFO ] - dvb:  LockInOnSignal ok
[2015-05-15 13:04:08,772] [Log    ] [DVB EPG timer] [INFO ] - subch:0 OnGraphStarted
[2015-05-15 13:04:08,787] [Log    ] [DVB EPG timer] [INFO ] - subch:0 SetupPmtGrabber:pid 0 sid:1
[2015-05-15 13:04:08,787] [Log    ] [DVB EPG timer] [INFO ] - subch:0 set pmt grabber pmt:0 sid:1
[2015-05-15 13:04:08,803] [Log    ] [DVB EPG timer] [DEBUG] - WaitForPMT: Waiting for PMT 0
[2015-05-15 13:04:08,850] [Log    ] [9        ] [INFO ] - subch:0 OnPMTReceived() pmt:30 ran:True dynamic:False
[2015-05-15 13:04:08,850] [Log    ] [DVB EPG timer] [DEBUG] - WaitForPMT: Found PMT after 0.0468001 seconds.
[2015-05-15 13:04:08,959] [Log    ] [9        ] [DEBUG] - Updated PMT Pid to 30!
[2015-05-15 13:04:08,959] [Log    ] [DVB EPG timer] [INFO ] - subch:0 SendPmt:1 1 FFFFFFFF 15
[2015-05-15 13:04:08,975] [Log    ] [DVB EPG timer] [INFO ] - Decode pmt
[2015-05-15 13:04:08,975] [Log    ] [DVB EPG timer] [INFO ] - subch:0 SendPMT: Channel is FTA, nothing to do.
[2015-05-15 13:04:08,990] [Log    ] [DVB EPG timer] [INFO ] - subch:0 SetMpegPidMapping
[2015-05-15 13:04:08,990] [Log    ] [DVB EPG timer] [INFO ] - subch:0  pid:31 pcr
[2015-05-15 13:04:08,990] [Log    ] [DVB EPG timer] [INFO ] - subch:0  pid:30 pmt
[2015-05-15 13:04:08,990] [Log    ] [DVB EPG timer] [INFO ] - subch:0  pid:31 video type:MPEG-2
[2015-05-15 13:04:08,990] [Log    ] [DVB EPG timer] [INFO ] - subch:0    map pid:31 video type:MPEG-2
[2015-05-15 13:04:08,990] [Log    ] [DVB EPG timer] [INFO ] - subch:0  pid:34 audio lang: type:AC3
[2015-05-15 13:04:09,006] [Log    ] [DVB EPG timer] [INFO ] - subch:0    map pid:34 audio lang: type:AC3
[2015-05-15 13:04:09,006] [Log    ] [DVB EPG timer] [DEBUG] - OnPMTReceived: MDAPI disabled. Possible reasons are _mdplugs=null or provider not listed
[2015-05-15 13:04:09,006] [Log    ] [DVB EPG timer] [INFO ] - subch:0 stop tif
[2015-05-15 13:04:09,006] [Log    ] [DVB EPG timer] [DEBUG] - WaitForPmt: PMT handling took 0.1560003 seconds.
[2015-05-15 13:04:09,037] [Log    ] [DVB EPG timer] [DEBUG] - card: Tuner locked: True
[2015-05-15 13:04:09,037] [Log    ] [DVB EPG timer] [INFO ] - **************************************************
[2015-05-15 13:04:09,037] [Log    ] [DVB EPG timer] [INFO ] - ***** SIGNAL LEVEL: 0, SIGNAL QUALITY: 100 *****
[2015-05-15 13:04:09,037] [Log    ] [DVB EPG timer] [INFO ] - **************************************************
[2015-05-15 13:04:09,037] [Log    ] [DVB EPG timer] [DEBUG] - card: tuned user: epg subchannel: 0
[2015-05-15 13:04:09,037] [Log    ] [DVB EPG timer] [INFO ] - user:epg add
[2015-05-15 13:04:09,053] [Log    ] [DVB EPG timer] [DEBUG] - CardReservation.RemoveTuneTicket: removed reservation with id=1, tuningdetails=ATSC:tv:Terrestrial CozyTV-D1 (WMFP) Freq:-1 ONID:16 TSID:1375 SID:1 PMT:0x30 FTA:True LCN:18 phys:18 maj:62 min:1 mod:Mod8Vsb
[2015-05-15 13:04:09,053] [Log    ] [DVB EPG timer] [INFO ] - card: SignalTuneEvent card: 7 / subch: 0
[2015-05-15 13:04:09,053] [Log    ] [DVB EPG timer] [INFO ] - Controller: GrabEpg on card ID == 7
[2015-05-15 13:04:09,053] [EPG    ] [DVB EPG timer] [INFO ] - EpgGrabbing: Start
[2015-05-15 13:04:09,053] [Log    ] [DVB EPG timer] [INFO ] - dvb:grab epg...
[2015-05-15 13:04:09,068] [EPG    ] [DVB EPG timer] [INFO ] - EpgCard: card: 7 starting to grab ATSC:tv:Terrestrial CozyTV-D1 (WMFP) Freq:-1 ONID:16 TSID:1375 SID:1 PMT:0x30 FTA:True LCN:18 phys:18 maj:62 min:1 mod:Mod8Vsb
[2015-05-15 13:04:12,843] [Log    ] [7        ] [DEBUG] - PS: GetCurrentState - Reset "Finished" and triggered StandbyWakeupThread
[2015-05-15 13:04:12,843] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: StandbyWakeupThread triggered by event
[2015-05-15 13:04:12,859] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: LoadSettings()
[2015-05-15 13:04:12,875] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: SetWakeupTimer()
[2015-05-15 13:04:12,890] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Inspecting WebEPGWakeupHandler: 5/16/2015 12:00:00 AM
[2015-05-15 13:04:12,906] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Set wakeup timer to wakeup system at 5/15/2015 11:59:00 PM
[2015-05-15 13:04:12,906] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: CheckForStandby()
[2015-05-15 13:04:12,906] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: SetStandbyMode(StandbyAllowed)
[2015-05-15 13:04:12,921] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: System is idle and may go to standby
[2015-05-15 13:04:12,921] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Active standby is disabled - standby is handled by Windows
[2015-05-15 13:04:12,937] [Log    ] [PS StandbyWakeup] [DEBUG] - PS: Requests preventing Windows standby: [DRIVER] Legacy Kernel Caller
[2015-05-15 13:04:12,953] [Log    ] [7        ] [DEBUG] - PS: GetCurrentState - StandbyWakeupThread signaled "Finished"
[2015-05-15 13:04:16,541] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Starting EPG refresh job on thread #22
[2015-05-15 13:04:16,541] [Log    ] [SchedulesDirect EPG Client] [INFO ] - UTC time is 5/15/2015 5:04:16 PM, local time is 5/15/2015 1:04:16 PM (DST is True)
[2015-05-15 13:04:16,541] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Rename Existing Channels is set to: True, with Template: {number} {callsign}.
[2015-05-15 13:04:16,556] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Add New Digital Channels is set to: True, with External Input: SvhsInput1.
[2015-05-15 13:04:16,556] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Add New Digital Channels is set to: True, with External Audio Input: SPDIFInput1.
[2015-05-15 13:04:16,556] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Add New Digital Channels Country is set to: United States.
[2015-05-15 13:04:16,556] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Add New Analog Channels is set to: False, with External Input: SvhsInput1.
[2015-05-15 13:04:16,572] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Add New Analog Channels is set to: False, with External Input: SPDIFInput1.
[2015-05-15 13:04:16,572] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Channel Sorting is set to: True.
[2015-05-15 13:04:16,572] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Allow Channel Matching without Frequency is set to: False.
[2015-05-15 13:04:16,572] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Delete Channels with No EPG Mapping is set to: False.
[2015-05-15 13:04:16,650] [Log    ] [SchedulesDirect EPG Client] [INFO ] - TEST: Username: plj49876
[2015-05-15 13:04:16,650] [Log    ] [SchedulesDirect EPG Client] [INFO ] - TEST: Password was set
[2015-05-15 13:04:16,650] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Requesting 24 hours of program listings from [5/15/2015 1:04:16 PM] to [5/16/2015 1:04:16 PM]
[2015-05-15 13:04:16,665] [Log    ] [SchedulesDirect EPG Client] [INFO ] - TEST: About ot call webservice
[2015-05-15 13:04:17,695] [Log    ] [SchedulesDirect EPG Client] [INFO ] - System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:50624
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at SchedulesDirect.SchedulesDirectWebService.SchedulesDirectWebServiceProxy.download(String startTime, String endTime)
   at SchedulesDirect.SchedulesDirectWebService.Download(DateTime startTime, DateTime endTime)
   at SchedulesDirect.Plugin.SchedulesDirectPluginTVE3.RunEpgImport()
[2015-05-15 13:04:17,695] [Log    ] [SchedulesDirect EPG Client] [INFO ] - ConnectFailure

 

[mm1352000]

Hello and welcome Paul

Since you're using the SD plugin: have you tweaked your hosts file?

Double check your "hosts" file setup. Most up to date info from SD-forums shows
54.85.117.227 docs.tms.tribune.com webservices.schedulesdirect.tmsdatadirect.com
http://forums.schedulesdirect.org/viewtopic.php?f=3&t=2614

you can flush your dns mapping cache to make sure there are no stale mappings, open an "admin" cmd.exe window and type ipconfig /flushdns

 

[Paul Jackson]

Thanks for the response.

I did adjust the host file as suggested in the post and made a build environment on my machine. I get an exception in the same location but a slightly different error.

[2015-05-16 08:22:44,678] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Channel Sorting is set to: True.
[2015-05-16 08:22:44,688] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Allow Channel Matching without Frequency is set to: False.
[2015-05-16 08:22:44,688] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Delete Channels with No EPG Mapping is set to: False.
[2015-05-16 08:22:44,800] [Log    ] [SchedulesDirect EPG Client] [INFO ] - TEST: Username: plj49876
[2015-05-16 08:22:44,810] [Log    ] [SchedulesDirect EPG Client] [INFO ] - TEST: Password was set
[2015-05-16 08:22:44,960] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Requesting 24 hours of program listings from [5/16/2015 8:22:44 AM] to [5/17/2015 8:22:44 AM]
[2015-05-16 08:22:44,960] [Log    ] [SchedulesDirect EPG Client] [INFO ] - TEST: About ot call webservice
[2015-05-16 08:22:44,970] [Log    ] [SchedulesDirect EPG Client] [INFO ] - System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: The requested address is not valid in its context 127.0.0.1:50624
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at SchedulesDirect.SchedulesDirectWebService.SchedulesDirectWebServiceProxy.download(String startTime, String endTime)
   at SchedulesDirect.SchedulesDirectWebService.Download(DateTime startTime, DateTime endTime)
   at SchedulesDirect.Plugin.SchedulesDirectPluginTVE3.RunEpgImport()
[2015-05-16 08:22:44,980] [Log    ] [SchedulesDirect EPG Client] [INFO ] - ConnectFailure
[2015-05-16 08:22:44,990] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Scheduling next poll for 1/1/0001 12:00:00 AM
[2015-05-16 08:22:45,020] [Log    ] [SchedulesDirect EPG Client] [INFO ] - Unable to process any channels, have you done an autotune in setup?

I tried with the following host entry and also commented out and got the same results. I made sure I ran ipconfig /flushdns between each change.

54.85.117.227 docs.tms.tribune.com webservices.schedulesdirect.tmsdatadirect.com

The code I am building has the following URL for the web service so if my understanding is correct I shouldn't actually need to change the host file but tried it anyway.

http://dd.schedulesdirect.org/schedulesdirect/tvlistings/xtvdService

I also tried the prebuilt downloaded version from the website as well as the one I built and got the same results. I can modify the code to print additional information in the log if it would help someone to figure this out. Thanks again.

 

[mm1352000]

Hmmm, this is odd.
Are you able to copy + paste the output of "ipconfig /all" here?
From the reference to 127.0.0.1, it just seems like something in the network config is not right...

 

[Paul Jackson]

C:\Windows\system32>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Jim-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : domain.actdsltmp

Wireless LAN adapter Wireless Network Connection 9:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #
5
   Physical Address. . . . . . . . . : 00-25-9C-B3-69-72
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection 7:

   Connection-specific DNS Suffix  . : domain.actdsltmp
   Description . . . . . . . . . . . : Linksys WUSB600N Wireless-N USB Adapter w
ith Dual-Band ver. 2 #5
   Physical Address. . . . . . . . . : 00-25-9C-B3-69-73
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::4594:7cd3:b8d5:104e%36(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Saturday, May 16, 2015 5:34:55 AM
   Lease Expires . . . . . . . . . . : Saturday, May 23, 2015 5:34:58 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 503326108
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-31-0A-04-78-2B-CB-94-E4-CB

   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : domain.actdsltmp
   Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
   Physical Address. . . . . . . . . : 78-2B-CB-94-E4-CB
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{A4CFAD39-AF5D-4878-A8A8-7B3414E1CB1B}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{CCE67A4C-824C-4BA8-9FBA-428F3E528CCB}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.domain.actdsltmp:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : domain.actdsltmp
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 23:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:5cf2:8c15:20d7:2bb3:3f57:fefd(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::20d7:2bb3:3f57:fefd%39(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled

 

[mm1352000]

Thanks
Do you know what those references to "domain.actdsltmp" are about?
Google says it may be a router config thing...
http://serverfault.com/questions/313668/what-is-domain-actdsltmp
http://www.sevenforums.com/network-sharing/262954-dns-error.html

 

[Paul Jackson]

I truly don't know what "domain.actdsltmp" is about. Not sure if it relates to the wireless device which is in the section it is. "Linksys WUSB600N Wireless-N USB Adapte" is my wireless network device that connects to the router.

In the meantime I am running a version of TV radar which is another program on the approved list. I'm doing this to make sure it's not something the schedule direct plug-in versus not being able to reach the schedules direct web service. It seems to be running now and downloading something but has not yet completed.

 

[mm1352000]

If this is a DNS issue - which I suspect it is - you will have random problems resolving domain names (eg. docs.tms.tribune.com) regardless of the software you use... but no problems if you use the IP addresses directly.

The more I read, the more it looks like "domain.actdsltmp" is a bad ISP or router DNS configuration.