New Zealand
Hi,
I have a problem with my Budget Technotrend 1401 DVB-S card.
After installing and running TV server config then doing a channel
scan, everything works fine. Channel change is around 1 sec and i
can move up and down the DVB-S channels with no problems.
Then after I reboot, it changes. switching to a DVB-S channel
from a DVB-T channel takes around 10 secs, then if I try to change
to another DVB-S channel it takes another 10 secs to display
"Unable to start timeshifting, No video/audio detected"
The only way I can move to another DVB-S channels is to go back to
a DVB-T / analogue channel first then back to another DVB-S channel.
I am using TT 4.4 drivers because i am using a Diseq switch and
I cannot get Diseq to work with 5.0.0.6 or 5.0.0.12, however the
same channel changing problem still occurs with the new drivers.
Other than that, everthing is up to date and all service packs, DVB
patches and other required packages have been installed.
I have attached 2 sets of log files one from before the reboot (when
everything is working) and on after.
Looking at the TSwriter logs, there appears to be a difference for the
line
TechnoTrend: IsCamPresent: 1
where it is 0 when it is working
and 1 when it isn't and loops
As the Budget TT doesn't have a cam or any way of putting one on,
is there anyway i can force TV Server not to look or disable the CAM option,
I've tried setting the CAM limit to 0 but this doesn't make any diference.
Any help would be appreciated
Also thanks to everyone involved for providing such a great program.
Cheers,
D
TV-Server Version: 1.0.0.0 RC1
MediaPortal Version: 1.0.0.0 RC1
MediaPortal Skin: BlueTwo wide
Windows Version: XP 5.1.2600 SP2
CPU Type: AMD Athlon 6400
HDD: Seagate 200GB
Memory: 1 GB DDR 2
Motherboard: Gigabyte GA-M56S
Video Card: Radeon X1650
Video Card Driver: 8.4
Sound Card: Realtek Onboard
Sound Card AC3: Opt / Coax out
Sound Card Driver: 5.10
1. TV Card: Hauppauge HVR-1300
1. TV Card Type: DVB-T / Analog
1. TV Card Driver: 2.121.25351.0
2. TV Card: Hauppauge HVR-1300
2. TV Card Type: DVB-T / Analog
2. TV Card Driver: 2.121.25351.0
3. TV Card: Technotrend 1401
3. TV Card Type: DVB-S
3. TV Card Driver: 4.4.10.18
4. TV Card: Avermedia
4. TV Card Type: analog
4. TV Card Driver: 1.0.6.12
MPEG2 Video Codec: Nvidia Purevideo
MPEG2 Audio Codec: Nvidia Audio
h.264 Video Codec: CoreAVC 1.6
Satelite/CableTV Provider: Freeview NZ - OPTUS D1
HTPC Case:
Cooling:
Power Supply:
Remote: Microsoft MCE
TV: SONY Bravia 46D
TV - HTPC Connection: DVI - HDMI
I have a problem with my Budget Technotrend 1401 DVB-S card.
After installing and running TV server config then doing a channel
scan, everything works fine. Channel change is around 1 sec and i
can move up and down the DVB-S channels with no problems.
Then after I reboot, it changes. switching to a DVB-S channel
from a DVB-T channel takes around 10 secs, then if I try to change
to another DVB-S channel it takes another 10 secs to display
"Unable to start timeshifting, No video/audio detected"
The only way I can move to another DVB-S channels is to go back to
a DVB-T / analogue channel first then back to another DVB-S channel.
I am using TT 4.4 drivers because i am using a Diseq switch and
I cannot get Diseq to work with 5.0.0.6 or 5.0.0.12, however the
same channel changing problem still occurs with the new drivers.
Other than that, everthing is up to date and all service packs, DVB
patches and other required packages have been installed.
I have attached 2 sets of log files one from before the reboot (when
everything is working) and on after.
Looking at the TSwriter logs, there appears to be a difference for the
line
TechnoTrend: IsCamPresent: 1
where it is 0 when it is working
and 1 when it isn't and loops
As the Budget TT doesn't have a cam or any way of putting one on,
is there anyway i can force TV Server not to look or disable the CAM option,
I've tried setting the CAM limit to 0 but this doesn't make any diference.
Any help would be appreciated
Also thanks to everyone involved for providing such a great program.
Cheers,
D
TV-Server Version: 1.0.0.0 RC1
MediaPortal Version: 1.0.0.0 RC1
MediaPortal Skin: BlueTwo wide
Windows Version: XP 5.1.2600 SP2
CPU Type: AMD Athlon 6400
HDD: Seagate 200GB
Memory: 1 GB DDR 2
Motherboard: Gigabyte GA-M56S
Video Card: Radeon X1650
Video Card Driver: 8.4
Sound Card: Realtek Onboard
Sound Card AC3: Opt / Coax out
Sound Card Driver: 5.10
1. TV Card: Hauppauge HVR-1300
1. TV Card Type: DVB-T / Analog
1. TV Card Driver: 2.121.25351.0
2. TV Card: Hauppauge HVR-1300
2. TV Card Type: DVB-T / Analog
2. TV Card Driver: 2.121.25351.0
3. TV Card: Technotrend 1401
3. TV Card Type: DVB-S
3. TV Card Driver: 4.4.10.18
4. TV Card: Avermedia
4. TV Card Type: analog
4. TV Card Driver: 1.0.6.12
MPEG2 Video Codec: Nvidia Purevideo
MPEG2 Audio Codec: Nvidia Audio
h.264 Video Codec: CoreAVC 1.6
Satelite/CableTV Provider: Freeview NZ - OPTUS D1
HTPC Case:
Cooling:
Power Supply:
Remote: Microsoft MCE
TV: SONY Bravia 46D
TV - HTPC Connection: DVI - HDMI