Reply to thread

Message

<blockquote data-quote="cacti" data-source="post: 716609" data-attributes="member: 109111">HiHere are the basic steps. I did not check the steps so I might have missed something small, but it should give you the general idea.Steps to load the channels into TV Server Config:1)&nbsp; &nbsp; The easy way is to import a config that has already been configured from: Download <a href="http://www.codeweaver.co.za/export.xml" target="_blank">http://www.codeweaver.co.za/export.xml</a>2)&nbsp; &nbsp; Open the TV Server Config and select Import/Export and import the export.xml file.3)&nbsp; &nbsp; Click on TV channels and select the channels you want active.4)&nbsp; &nbsp; Click on TV mappings and map the channels to your input card5)&nbsp; &nbsp; You can also download <a href="http://www.codeweaver.co.za/logos.zip" target="_blank">http://www.codeweaver.co.za/logos.zip</a> and extract it to C:\Users\All Users\Team MediaPortal\MediaPortal\thumbs\tv\logos to get the correct icons for every channel.Steps to load the DSTV guide:1)&nbsp; &nbsp; Enable the XmlTv plug-in in the MP server config2)&nbsp; &nbsp;&nbsp; Configure the path where you are going to place the guide data.3)&nbsp; &nbsp; Download the dtd file from <a href="http://www.codeweaver.co.za/tvguide.dtd" target="_blank">blah</a>4)&nbsp; &nbsp; Download the guide from: <a href="http://zaxmltv.flash.za.org/schedule/ZA-XMLTV.xml.gz" target="_blank">http://zaxmltv.flash.za.org/schedule/ZA-XMLTV.xml.gz</a>5)&nbsp; &nbsp; Extract the xml file and place the xml file and dtd file under the directory you configured in step 2.&nbsp; Just remember to rename the xml file to tvguide.xml6)&nbsp; &nbsp; Ensure the guide imports correctly by verifying the import status report.7)&nbsp; &nbsp; Develop a script to automatically download the newest xml file once every day.What decoder do you use?&nbsp; The instructions below will word for the 990, 1110 and 1113 decoders – it might work for others also, but I only tested the above.Steps to get the blaster to work:1)&nbsp; &nbsp; Install IR Server.&nbsp; I user version 1.4.2.36642)&nbsp; &nbsp; Ensure you configure your blaster for transmit and receive and run IR Server as a service.3)&nbsp; &nbsp; Open TV Server configuration4)&nbsp; &nbsp; Enable the TV4 plug-in5)&nbsp; &nbsp; Open the TV3 config and select STB Config under the Plugin Setup6)&nbsp; &nbsp; Select Panasat IRD624DSTV under quick setup and click Set7)&nbsp; &nbsp; Test the blaster using the test function8)&nbsp; &nbsp; Also remember to disable the MCE remote under Media Portal Config -&gt; Remote (this is assuming you use the MCE remote)9)&nbsp; &nbsp;&nbsp; You might have to restart MP to get the IR server to work correctly.</blockquote>

[QUOTE="cacti, post: 716609, member: 109111"] Hi Here are the basic steps. I did not check the steps so I might have missed something small, but it should give you the general idea. Steps to load the channels into TV Server Config: 1) The easy way is to import a config that has already been configured from: Download [url]http://www.codeweaver.co.za/export.xml[/url] 2) Open the TV Server Config and select Import/Export and import the export.xml file. 3) Click on TV channels and select the channels you want active. 4) Click on TV mappings and map the channels to your input card 5) You can also download [url]http://www.codeweaver.co.za/logos.zip[/url] and extract it to C:\Users\All Users\Team MediaPortal\MediaPortal\thumbs\tv\logos to get the correct icons for every channel. Steps to load the DSTV guide: 1) Enable the XmlTv plug-in in the MP server config 2) Configure the path where you are going to place the guide data. 3) Download the dtd file from [url=http://www.codeweaver.co.za/tvguide.dtd]blah[/url] 4) Download the guide from: [url]http://zaxmltv.flash.za.org/schedule/ZA-XMLTV.xml.gz[/url] 5) Extract the xml file and place the xml file and dtd file under the directory you configured in step 2. Just remember to rename the xml file to tvguide.xml 6) Ensure the guide imports correctly by verifying the import status report. 7) Develop a script to automatically download the newest xml file once every day. What decoder do you use? The instructions below will word for the 990, 1110 and 1113 decoders – it might work for others also, but I only tested the above. Steps to get the blaster to work: 1) Install IR Server. I user version 1.4.2.3664 2) Ensure you configure your blaster for transmit and receive and run IR Server as a service. 3) Open TV Server configuration 4) Enable the TV4 plug-in 5) Open the TV3 config and select STB Config under the Plugin Setup 6) Select Panasat IRD624DSTV under quick setup and click Set 7) Test the blaster using the test function 8) Also remember to disable the MCE remote under Media Portal Config -> Remote (this is assuming you use the MCE remote) 9) You might have to restart MP to get the IR server to work correctly. [/QUOTE]

Verification