SplitterPack an alternative to haali media splitter (1 Viewer)

[Helios61]

Hi Win7!

Ok first question which windows version are you using? x86 or x64?

Win7 x86 and MP alpha 1.1.0!

Last but not least which codecs are you using?

CoreAVC 1.9.5 for HD, PowerDVD 9 for SD! But the Problem is a file with this mediainfo:

Allgemein
ID : 0
Vollständiger Name : H:\TV Serien\Planet Erde\Planet Earth - S01E03 - Fresh Water.ts.mkv
Format : MPEG-TS
Dateigröße : 7,52 GiB
Dauer : 51min
Gesamte Bitrate : 21,0 Mbps

Video
ID : 4129 (0x1021)
Menü-ID : 1 (0x1)
Format : VC-1
Format-Profil : AP@L3
Dauer : 51min
Bitrate : 18,8 Mbps
Breite : 1 920 Pixel
Höhe : 1 080 Pixel
Bildseitenverhältnis : 16/9
Bildwiederholungsrate : 23,976 FPS
Colorimetrie : 4:2:0
Scantyp : progressiv
Scanreihenfolge : 2:3 Pulldown
Bits/(Pixel*Frame) : 0.378
Stream-Größe : 6,74 GiB (90%)

Audio #1
ID : 4134 (0x1026)
Menü-ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Dauer : 51min
Bitraten-Modus : konstant
Bitrate : 448 Kbps
Kanäle : 6 Kanäle
Kanal-Positionen : Front: L C R, Surround: L R, LFE
Samplingrate : 48,0 KHz
Stream-Größe : 164 MiB (2%)

Audio #2
ID : 4141 (0x102D)
Menü-ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Format-Profil : Dolby Digital
Dauer : 51min
Bitraten-Modus : konstant
Bitrate : 256 Kbps
Kanäle : 2 Kanäle
Kanal-Positionen : L R
Samplingrate : 48,0 KHz
Stream-Größe : 93,9 MiB (1%)

Its a .ts file renamed to .mkv, and another codec will be used, i never have choosen:



Subtitles are broken too!


Thanks for your reply

Helios

 

[dlarge500]

Hello

I`m using the new Haali Media Splitter 1.9.63.13 on my Win7 and CoreAVC not supported correctly Win7 but i used the Dvix 7 h264 Codec without this owned Media Splitter.

Haali Media Splitter download

Dvix Installer Download

Or you can test CoreAVC with this Tool from CLsid that can change the preferred filters with just a few clicks

Win7 Filter Tweaker Download

 

[Win7]

Helios61

Is this the remote graph of mediaportal or did you render the video in graphstudio?
You can try rendering the video in graphstudio directly. It also will use the ms wmvideo dmo decoder but you can try replacing that with coreavc. If that isn´t working eigher there is a problem with the mpc-hc matroska splitter and coreavc. So you have to decide with which problems you want to live. As discribed above the splitter pack is an alternative but it has also failures! Its working great for me but i found others that also have problems with it. Currently we have the problem that haali media splitter is a incompatible to windows seven but there is also no real solution . I hope we´ll get soon a windows seven kompatible haali media splitter because even if the mpc-hc splitter would always work correct i can´t switch the audio channel!
I testet the splitter pack with many files and it was working but i couldn´t test it with any video on this world

 

[Helios61]

Hi Win7!

This is the graph of MP, but all this is not my problem! My Problem i described in the german thread! -> Link! Com surrogate causes 100% stress for my cpu, if i open a folder with .ts files and haali mediasplitter opens in info center!

Best regards

Helios

 

[Win7]

Ok then i´ll answer in the german thread

 

[Rrrr]

Win7,

Finally got to following your examples, I have 1 issue and 1 question:

1. After uninstalling Haali, I ran the reg fix, then I downloaded your SplitterPack : I ran the install bat, but got the following error:
RegSvr32: The module was loaded but the call to DllRegisterServer failed with error code 0x80070005

2. I have on this computer already the Cyberlink.PowerDirector.Ultra.v7
How do I verify I have the right codec?
Will installing your link to Cyberlink PowerDVD affect my Powerdirector install?

3. To install the Cyberlink codec, should I actually install the trial? I mean that (following a previous procedure) I also got CLVsd.ax and at the time put it in the C:\ is that enough?

Thanks

 

[Helios61]

HI Rrrr!

Win7,

Finally got to following your examples, I have 1 issue and 1 question:

1. After uninstalling Haali, I ran the reg fix, then I downloaded your SplitterPack : I ran the install bat, but got the following error:
RegSvr32: The module was loaded but the call to DllRegisterServer failed with error code 0x80070005
Thanks

Try to register the filters "as administrato"!

best regards

Helios

 

[Rrrr]

thank you.

But I am logged in as a user with Administrator privileges.

I am new to W7, I cant see a user called Administrator, but should the above not be sufficient?

 

[Helios61]

thank you.

But I am logged in as a user with Administrator privileges.

I am new to W7, I cant see a user called Administrator, but should the above not be sufficient?

right click on cmd.exe -> run as administrator

then regsvr32 xxx.ax

best regards

Helios

 

[Rrrr]

thanks, this did the trick

I continue in this thread:
https://forum.team-mediaportal.com/...upport-53/configuration-1-0-2-vista-w7-66437/