Still getting "missing hotfix warning" after 1.1.3 upgrade and other problems (1 Viewer)

[spitjo]

Like i said in the title,
after upgrading my 1.1.2 to 1.1.3 for best compatibility with my windows 7 professional service pack 1 x86, i'm still getting the warning when launching tvserver config. No warning with mp config.
The tvserver config app reports the correct version (1.1.3)
As a side note, after the upgrade, channel change time is A LOT increased, and i have a noticeable lag when going back or forward in the time.....
I also have a problem when resuming from standby. When i try to play a tv channel i get first a "can't play strem xxx" then i press play again and i get "no audio/video found" and, at the third try, the channel plays correctly. This happen EVERY TIME i resume....
With 1.1.2 everything was working smooth and stable.....
I thought that this was just a small upgrade to suppress those warnings... but i still have one of them and i "gained" some bad troubles......



MediaPortal Version: 1.1.3
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 Professional x86 SP1
CPU Type: INTEL Q6600 2,4 Ghz Quad-Core
HDD: System = Maxtor 80Gb Sata II / Timeshift = Seagate 500Gb Sata II
Memory: 2 x 1Gb Corsair DDR2 800 Mhz / 1Gb Kingmax DDR2 800 Mhz
Motherboard: Asus P5B
Video Card: Asus GeForce 8800GT 512Mb DDR3
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Technotrend s2 1600
1. TV Card Type: Dvb-S2
1. TV Card Driver: 5.0.1.8
2. TV Card: Terratec HT Pci
2. TV Card Type: Hybrid (Analog + DVB-T)
2. TV Card Driver: 1.3.3.5
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MS DTV
MPEG2 Audio Codec: FFDShow
h.264 Video Codec: MS DTV
Satelite/CableTV Provider: Hotbird 13°E
HTPC Case: Cooler Master Elite 330
Cooling: Cooler Master & Titan Fans
Power Supply: Recom Real Power 550W
Remote: Microsoft MCE
TV: Samsung 27" Lcd Hd Ready - LE27S71B
TV - HTPC Connection: Hdmi - DVI-D

 

[robyf]

Please post logs...

 

[elliottmc]

As a side note, after the upgrade, channel change time is A LOT increased, and i have a noticeable lag when going back or forward in the time.....

Hi,

This is not possible as a result of the 1.1.3 update. The only thing that has changed is the detection of OS version.

Check your error.log to see what version of the TVService MediaPortal thinks is running. It is possible that you have not successfully updated the TVService even though its configuration application has been updated.

Mark

 

[robyf]

As a side note, after the upgrade, channel change time is A LOT increased, and i have a noticeable lag when going back or forward in the time.....

Check your error.log to see what version of the TVService MediaPortal thinks is running. It is possible that you have not successfully updated the TVService even though its configuration application has been updated.

This is why I asked for logs ...