SVN 06-22-2006--01-02: NO DVB-T EPG-Grapping (1 Viewer)

[McHep]

Hi,

after installing the above svn-build, there is no longer DVB-T EPG-Grapping. In the epg.log there is always only a entry like

22.06.2006 12:22:47 auto-epg: card:Terratec Cinergy T USB XS (DVB-T) grab epg for channel:Bayerisches FS expected:1 hours, last event in tv guide:01.01.0001 00:00:00, last grab :01.01.0001 00:00:00

No update to the tvdatabase is done and also no update to the pmt in \database\pmt

Can anyone explain/fix this?

Regards

 

[sysfix]

confirmed

I can confirm this is happening to me also.
Terratec 2400i TV card.

using SVN mediaportal-svn-06-21-2006--21-11.rar

epg.log as follows:



22/06/2006 18:27:13 auto-epg: card:Terratec Cinergy 2400i DT Tuner 1 grab epg for channel:BBC ONE expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 18:28:13 auto-epg: card:Terratec Cinergy 2400i DT Tuner 2 grab epg for channel:BBC TWO expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 18:36:19 auto-epg: card:Terratec Cinergy 2400i DT Tuner 1 grab epg for channel:ITV1 expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 18:37:20 auto-epg: card:Terratec Cinergy 2400i DT Tuner 1 grab epg for channel:Channel 4 expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 18:47:22 auto-epg: card:Terratec Cinergy 2400i DT Tuner 1 grab epg for channel:five expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 18:57:23 auto-epg: card:Terratec Cinergy 2400i DT Tuner 1 grab epg for channel:ITV2 expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 19:07:25 auto-epg: card:Terratec Cinergy 2400i DT Tuner 1 grab epg for channel:BBC THREE expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 19:11:06 auto-epg: card:Terratec Cinergy 2400i DT Tuner 2 grab epg for channel:E4 expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 19:21:07 auto-epg: card:Terratec Cinergy 2400i DT Tuner 2 grab epg for channel:ITV3 expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00
22/06/2006 19:31:09 auto-epg: card:Terratec Cinergy 2400i DT Tuner 2 grab epg for channel:More 4 expected:1 hours, last event in tv guide:01/01/0001 00:00:00, last grab :06/11/1971 00:00:00

 

[AberDino]

Same here, epg.log same as yours.

 

[mne2]

same here too

 

[sysfix]

resolved?

Just installed the latest svn. Seems to be working again

 

[McHep]

SVN 06-23-2006--01-01: NO DVB-T EPG-Grapping with Timeshift

hi,

with the above build EGP-Grapping is only function without Timeshift. If you start MP with timeshift there will be no update!

 

[Maschine]

Hi,

I also had the no-grabbing issue. I can confirm it's working again, but for me it also works with timeshift on. Please double check on your system!

Maschine

 

[mne2]

I had to clean out my EPG data before mine started working again.

 

[McHep]

No EPG-Grapping with Timeshift

I checked again. If I start MP with timeshift enabled in configuration it will not grab EPG. If I stop timeshift in MP-Gui EPG-Grapping will then start. It also will not grap if i have timeshift enabled an switching to another channel. If I stop then again timeshift it is the same effect like above (it starts grabbing).

I have a Cinergy T USB XS card (as card1) and a Hauppage HVR 1300 (card2).

In an older build-number the hauppage card always running in background the epg-grabbing, cause it is configured not to record. It's only for viewing but with an priority of 5 (Cinergy Card has priority 10).

Log-File (without timeshift)

24.06.2006 00:32:37 Recorder: Card:Terratec Cinergy T USB XS (DVB-T) view tv channel:RTL TELEVISION
24.06.2006 00:32:37 Recorder: Card:Hauppauge HVR-1300 Digital idle
24.06.2006 00:32:37 Recorder: Card:Hauppauge HVR-1300 Analogue idle
24.06.2006 00:32:37 7 VMR9Helper: playing->repaint 50
24.06.2006 00:32:37 wait for pmt :-1
24.06.2006 00:32:37 DVBGraph:Got PMT version:1
24.06.2006 00:32:37 DVBGraph: OnPMTIsChanged:database\pmt\pmt_RTL TELEVISION_8468_8706_16405_5.dat
24.06.2006 00:32:37 DVBGraphendPMT() set demux: video pid:151 audio pid:152 AC3 pid:0 audio1 pid:152 audio2 pid:0 audio3 pid:0 subtitle pid:FFFFFFFF teletext pid:157 pcr pid:151
24.06.2006 00:32:37 DVBDemuxer:RTL TELEVISION audio:152 video:151 teletext:157 pmt:150 subtitle:0 program:16405
24.06.2006 00:32:37 DVBGraphetHardwarePidFiltering to:0,1,10,11,12,D3,D2,151,152,150,157,
24.06.2006 00:32:37 update dvbt channel:RTL TELEVISION
24.06.2006 00:32:37 DVBGraph: grab epg for RTL TELEVISION
24.06.2006 00:32:37 1 VMR9Helper: repaint->playing 50


Log-File (with timeshift)

24.06.2006 00:42:17 Command:MediaPortal.TV.Recording.TimeShiftTvCommand time:2031,302 msec
24.06.2006 00:42:17 Recorder: Card:Terratec Cinergy T USB XS (DVB-T) timeshift tv channel:RTL TELEVISION
24.06.2006 00:42:17 Recorder: Card:Hauppauge HVR-1300 Digital idle
24.06.2006 00:42:17 Recorder: Card:Hauppauge HVR-1300 Analogue idle
24.06.2006 00:42:17 wait for pmt :-1
24.06.2006 00:42:17 DVBGraph:Got PMT version:1
24.06.2006 00:42:17 DVBGraph: OnPMTIsChanged:database\pmt\pmt_RTL TELEVISION_8468_8706_16405_5.dat
24.06.2006 00:42:17 DVBGraphendPMT() set demux: video pid:151 audio pid:152 AC3 pid:0 audio1 pid:152 audio2 pid:0 audio3 pid:0 subtitle pid:FFFFFFFF teletext pid:157 pcr pid:151
24.06.2006 00:42:17 DVBDemuxer:RTL TELEVISION audio:152 video:151 teletext:157 pmt:150 subtitle:0 program:16405
24.06.2006 00:42:17 DVBGraphetHardwarePidFiltering to:0,1,10,11,12,D3,D2,151,152,150,157,
24.06.2006 00:42:17 update dvbt channel:RTL TELEVISION
24.06.2006 00:42:18 Recorder: start viewing timeshift file of card Terratec Cinergy T USB XS (DVB-T)


As you can see, the above bold marked line does not exist in the log with timeshift.

When I look at the source-code of DVBGraphBase.cs i find only one section with that:

if (Recorder.IsCardViewing(_cardId) || _graphState == State.Epg || _graphState == State.Radio)
{
Log.WriteFile(Log.LogType.Log, "DVBGraph: grab epg for {0}", _currentTuningObject.ServiceName);
_epgGrabber.GrabEPG(_currentTuningObject.ServiceName, _currentTuningObject.HasEITSchedule == true);
}


so, the condition(s) in timeshift are not fulfilled